Re: Oprava poolu SYS
Jan Rabas
tak se to nakonec povedlo vyresit (asi 3 dny po zadani tohoto dotazu). Povazuji za
povinnost to zde dodatecne uvest, kdyby zde nekdo hledal reseni.
Puvodne uvedeny postup TID 10089019 plati pro NW 6.5 pred SP 3. Ale pro NW 6.5
SP 3 jiz plati novy postup, a to TID 10065776:
How to rebuild a pool prior to volume mount.
(Last modified: 04Sep2005)
This document (10065776) is provided subject to the disclaimer at the end of this
document.
goal
How to rebuild a pool prior to volume mount.
symptom
SYS or other volume corrupt.
SYS or other pool will not activate.
SYS or other volume will not mount.
Corrupt snapshot.
Server abend on startup.
fact
Novell NetWare 6.5
Novell NetWare 6.0
Novell Storage Services (NSS)
fix
Option 1:
1. At the DOS prompt from C:\NWSERVER, bring up the server by typing (this will
bring up the server without activating the Pool):
server -z"/poolautodeact={pool}" Include the quotes. Replace {POOL} with your pool
name, e.g. server -z"/poolautodeact=SYS"
Optional. If you are troubleshooting a snapshot problem it may help at this point to type:
mm snap delete all
Optional. This gives some information regarding inconsistencies in the pool. It can
take a long time and cannot be cancelled once started:
NSS /poolverify={POOL}
2. Run the pool rebuild:
NSS /poolrebuild={POOL} ("NSS /poolrebuild" without the pool name should bring up
a menu and allow you to select the pool that you want to rebuild.)
Option 2, Works for NetWare 6.0 only:
At the DOS prompt from C:\NWSERVER, bring up the server by typing:
server -ns
When the server comes to a ":" prompt, type:
Loadstage 1
startup
nss /PoolAutoMaintenance={POOL} Replace {POOL} with your pool name, e.g. nss
/PoolAutoMaintenance=SYS
nss zlsspoolscan
nss /poolrebuild (Select the pool that the SYS volume resides on, the pool is usually
also named SYS. Or you can type: nss /poolrebuild=SYS)
Note: On NetWare 6.x, you cannot verify or rebuild individual volumes. You can only
verify or rebuild the entire pool.
note
For additional information on NetWare 6, please see the following solution. TID
#10064501 - NetWare 6 Readme Addendum
document
Document Title: How to rebuild a pool prior to volume mount.
Document ID: 10065776
Creation Date: 01Nov2001
Modified Date: 04Sep2005
Novell Product Class: NetWare
Novell eDirectory
disclaimer
---
Date sent: Wed, 19 Oct 2005 18:11:27 +0200
Send reply to: nov...@cs.felk.cvut.cz
From: "Jan Rabas" <J.R...@MU.TURNOV.CZ>
To: nov...@cs.felk.cvut.cz
Subject: Oprava poolu SYS
> Dobry den,
> mate, prosim, nekdo zkusenosti s opravou poolu?
>
> Nebo neznate nejaky nastroj, ktery bych mohl na opravu pouzit? Ledacos
> jsem jiz nasel, napr. Portlock Disk Test (Version 3.03) for NetWare.
> Ale ten je placeny a cas me tlaci. Snad ho ale budu nakonec muset
> koupit.
>
> Na jednom serveru s NetWare 6.5 doslo k tomu, ze server pri aktivaci
> poolu SYS ohlasi kritickou chybu a po 2 minutach probehne automaticky
> restart. A tak porad dokola.
>
> Nasel jsem si postup na support.novell.com, kde je uveden postup, jak
> provest opravu poolu SYS jeste pred tim, nez nastane ona chyba.
>
> Je to na adrese:
> http://support.novell.com/techcenter/search/search.do?cmd=displayKC&do
> cTyp e=kc&e xternalId=10089019html&sliceId=&dialogID=1082275
>
> Je tam uveden tento postup:
> Need to rebuild NSS pool but server restarts before able to rebuild.
> (Last modified: 24Nov2003)
>
> This document (10089019) is provided subject to the disclaimer at the
> end of this document. goal
>
> Need to rebuild NSS pool but server restarts before able to rebuild.
> fact
>
> Novell NetWare 6.5
>
> Novell NetWare 6.0
> symptom
>
> Server restarts prior to server being fully up to be able to rebuild
> pool
>
> Server abends shortly after SCSI driver loaded due to pool corruption
> of the SYS pool fix
>
> The default of 2 minutes for the server restart after abend delay time
> is too short to allow running of utilities to repair the NSS pool
>
> Try the following process:
>
> 1. From the DOS prompt (C:\NWSERVER) enter "server -ns"
>
> 2. From the server ":" prompt enter "loadstage 1"
>
> 3. From the server ":" prompt enter "loadstage 2"
>
> 4. From the server ":" prompt enter "set auto restart after abend
> delay time=60"
>
> 5. From the server ":" prompt enter "startup"
>
> 6. If the server abends and asks if you want a core dump or to
> suspend the offending NLM, choose suspend.
>
> 7. From the server ":" prompt enter "nss /poolrebuild={pool}" where
> {pool} is the name of your bad pool
>
> ---
>
> Po pokusu o provedeni loadstage 1 i 2 hlasi, ze to nelze provest, kdyz
> se predtim neprovedl startup.ncf.
>
> Dale vse probehne bez chyb, ale pri spusteni nss /poolrebuild=sys
> nelze natahnout nektere moduly. I kdyz jsem vsechny dalsi moduly ze
> svazku SYS (z jineho serveru) nakopiroval primo do C:\NWSERVER.
>
> ---
>
> Dekuji moc za jakoukoliv radu.
>
> Jan Rabas
> Site a servery Novell
> Aplikace
>
> Mesto Turnov
> Antonina Dvoraka 335
> 511 22 Turnov
> www.turnov.cz
>
> Tel.: +420 481 366 309
> Fax :+420 481 366 112
>
Jan Rabas
setkal jste se, prosim, nekdo z Vas s nasledujici situaci?
Server: OES (SP1) - NetWare 6.5 (SP4)
Pri cteni objektu eDirectory pres LDAP hlasi LDAP Browser (nebo jakykoliv jiny program
vyuzivajici pristup pres LDAP) u 4 objektu chybu, napr.:
Failed to read entry cn=Admin, ou=mu, o=turnov,c=cz
Dale to hlasi stejnou chybu jeste u 2 beznych uzivatelu a u jednoho objektu
ldap://192.168.100.1:636/cn=MailUsers,o=Turnov,c=cz (Tento objekt mi ukazuje jen
LDAP Browser, v ConsoleOne ani v i Manageru to nevidim, nevim, co je to za objekt.)
Jinak vsechny ostatni objekty jsou v poradku.
Nastavenim prav k objektum by to nemelo byt. Jednak mam plna prava na cely strom a
pak v ConsoleOne, v NW Admin. i v iManageru vidim a mohu i upravovat vlastnosti
vyse jmenovanych uziavtelu.
Nevite, prosim, cim by to mohlo byt zpusobeno?