Cyclone PCB Factory

Oh and regarding the MixShop kit, do you deem it necessary to put a warning message in the "list

Hi Jack, Nice build :) You can find the PCBs here : http://www.conrad.com/ce/en/product/528382/Proma-

Nice, congrats!! happy milling indeed ^^ On Mon, Aug 3, 2015 at 6:42 PM, Niels Geens <niels.geens@

Hi David, sorry for the delayed response :S I am not sure, but the issue looks related to the stepper

Thanks for replying. Why did you use 24v? Did you use 24v motors, or 12v just wasn't enough? 2015

Thank you it's working!! That was the problem I left the crocodile limit switch connected to the

Hi, the Z axis does not have an endstop. It will home towards the material, the probe is the endstop

The shipping basically means you don't buy from most stores in the EU unless they have actually

Sorry for the late response! The pictures on V1 are indeed misleading in regards to Z. But trust me

Nice to have people like you around here!! :D thats a good improve to marlin!! maybe you can send a

@Drygol może tam napiszemy po Polsku? bo mój angielski jest słaby. Będę używać zasilacza 12V do

First of all guys, amazing work, congrats!!! I've been tinkering in my on Cyclone as to achieve

I replaced your servo library and excluded the timer1 .. Marlin uses the Timer1 for the steppermotors

Hi Henrik. I've readed that you are working in some software to do the autoleveling in two steps,

Sorry, one additional question to it: I don't see on Erik Zalm's page any F-code mentioned at

Thanks Jiri for translation into English. :-)

Hi Ethan, welcome in our community. Nice Project.. sharing on github would be a great option ;)

Mother board value was 14. I have added my own pin defs. The pins.h definition is below. Just needs

Thanks for your help, tested it today works great.. Now to workout how to use Sanguinololu to control

yeah, its better to think directly on teacup, it runs from a 168, the 328 will be plenty enough :P El