Skip to first unread message
Miguel Angel Berna Alberola
Feb 25, 2015, 10:06:45 AM2/25/15
to cyclone-p...@googlegroups.com
Hi, I'm Miguel Angel, I started my build cyclone pcb, and I have problems:
The 608ZZ bearings as they are attached to the piece, they stick?
M8 nuts stick to the rod M8, or just tightened?
**********************************************************************************************
Los rodamientos 608ZZ como se sujetan a la pieza, se tienen que pegar?
Las tuercas de M8 como se pegan a la varilla de M8, o solo se aprietan?
Carlos García
Feb 25, 2015, 10:16:10 AM2/25/15
to cyclone-p...@googlegroups.com
Hi Miguel Angel,
The bearings are held in place with the tension from tightening the nuts.
Some nuts need to be locked against each other (in the XYZ gears), normally you wouldn't need to glue them in place.The bearings are held in place with the tension from tightening the nuts.
Cheers,
Carlos
*************************************************************************************************
Los rodamientos se sostienen gracias a la propia tension de apretar las tuercas.
--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-fac...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at http://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/94b5ae67-5f15-4303-8f1a-6789bcff6a3e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Miguel Angel Berna Alberola
Feb 25, 2015, 10:21:36 AM2/25/15
to cyclone-p...@googlegroups.com
ok, thanks
El miércoles, 25 de febrero de 2015, 16:16:10 (UTC+1), Carlos García Saura escribió:
CarlosSaludos,Algunas tuercas hay que apretarlas unas contra otras (para los engranajes de XYZ), normalmente no deberia hacer falta pegarlas.Hi Miguel Angel,Some nuts need to be locked against each other (in the XYZ gears), normally you wouldn't need to glue them in place.
The bearings are held in place with the tension from tightening the nuts.Cheers,CarlosHola Miguel Angel,
*************************************************************************************************
Los rodamientos se sostienen gracias a la propia tension de apretar las tuercas.
On Wed, Feb 25, 2015 at 3:06 PM, Miguel Angel Berna Alberola <maberna...@gmail.com> wrote:
Hi, I'm Miguel Angel, I started my build cyclone pcb, and I have problems:The 608ZZ bearings as they are attached to the piece, they stick?M8 nuts stick to the rod M8, or just tightened?**********************************************************************************************Hola buenas soy Miguel Angel, he comenzado mi construcción de cyclone pcb, y tengo dudas:Los rodamientos 608ZZ como se sujetan a la pieza, se tienen que pegar?Las tuercas de M8 como se pegan a la varilla de M8, o solo se aprietan?
--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages