Error in Autoleveling

[Jose Juan Macias Hernandez]

I got the following message when starting autoleveling option using CNCGCODEController

"error or warning state reported. Should not happen"

Anybody knows some reason?

I have connectd the autoleveling connections and It seems that works when touch the PCB copper side

Thanks 

Pepe

[p.fabi...@gmail.com]

Not exactly a solution but I advise you to try bCNC program :)

> Wiadomość napisana przez Jose Juan Macias Hernandez <jmaci...@gmail.com> w dniu 05.04.2020, o godz. 18:14:
>
> CNCGCODEController

[Carlos García]

Yes bCNC has been developed more :)

What do you mean by "It seems that works when touch the PCB copper side"? Please detail the tests you have made.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-fac...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/F9BDEEB2-B5A4-469A-A27F-726C6CBDB236%40gmail.com.

[Patrick Knöbel]

The autoleveling algorithm is generating a list of gcodes internally and is processing it.
In the processing step something is going wrong. So the internally used gcodes cannot be interpreted correctly. This should not happen.

Do you use some unusual setting? Maybe play with the gcode settings and see if it solves the problem.

Greatings
Patrick

[Nando]

If you use GRBL firmware give Candle CNC app a try ( https://github.com/Denvi/Candle ) odd name but works really well.

I found bCNC and others a bit too messy in terms of the auto-level.

-Nando

Sent from my Sinclair ZX81

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-fac...@googlegroups.com.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/4f0f423d-1781-4d20-8d04-aba8b9d7b85c%40googlegroups.com.

[Paweł Fabiszewski]

bCNC needs some setup but its autoleveling is VERY accurate and reliable I think. I will check that out for sure.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/CAKDCpc7kq0Ki3UduuShnGGB8iP3FkN%2BBK0EjixbLAhTk2si5Pg%40mail.gmail.com.

[Jose Juan Macias Hernandez]

Thanks for the info, I discover the problem. It was a settings problem. I have some configuration issues regarding autoleveling but that problem is not sowing any more.

I will try bCNC and Candle CNC as your advise.

Thanks a lot!!!

You received this message because you are subscribed to a topic in the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/cyclone-pcb-factory/Xtd1wzGPWpI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to cyclone-pcb-fac...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/CAOxuMWRSKG-dEwuiRv6-ZLayp6zdbiU%3DXEY1nGVVME5pGF%3Dimw%40mail.gmail.com.