Board layout template?

[clive0106]

I am sure that it must be somewhere obvious... But..
I cant locate the layout template for drilling the baseboard for the version 2.1 machine.
Help please
Clive

[Carlos García]

Hi Clive, here you have them:
https://github.com/carlosgs/Cyclone-PCB-Factory/tree/master/Output_files/templates

Direct downloads:
https://github.com/carlosgs/Cyclone-PCB-Factory/raw/master/Output_files/templates/Cyclone_base_template_A4.pdf
https://github.com/carlosgs/Cyclone-PCB-Factory/raw/master/Output_files/templates/Cyclone_workbed_template_A4.pdf

Cheers,

Carlos

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-fac...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.
Visit this group at http://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/e1ce1f92-ad6c-4600-b830-065f93cf6b1d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[clive0106]

Wow, that was such a fast reply :)  Thank you so much

I have another question please?

The (skate) bearings are quite a loose fit as the holes are slightly V shaped.. Should any of the bearings be glued in?

Thanks

[clive0106]

Wow, that was such a fast reply :)  Thank you so much

I have another question please?

The (skate) bearings are quite a loose fit as the holes are slightly V shaped.. Should any of the bearings be glued in?

Thanks

On Wednesday, July 22, 2015 at 9:06:43 PM UTC+8, Carlos Garcia Saura wrote:

[Carlos García]

You're welcome :)
But be warned that some times it takes me ages to reply 😅

The bearings usually stay in place thanks to a spring in one of the sides (one spring for the anti-backlash and another one to keep the axis tensioned against the bearings).

You can use glue if you feel the need for it though.

Cheers,

Carlos

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/6505bb31-86ae-4cd2-b9e5-d6cb555228e2%40googlegroups.com.