How to reset low toner on Brother monochrome and MFC printers TN750 TN450

2 views
Skip to first unread message

Robert Bohacek

unread,
Aug 15, 2014, 5:26:44 PM8/15/14
to BLOG cwtampabay.com cwtechnicalsupport, CW Technical Google Groups, CWT Blog cwtechnicalsupport

Reset the low toner message for Brother monochrome printers

Printer still reading “low toner”

You just changed the toner out, and it still reads as if it is low. If you have that issue you’re not alone. It is common for brother printers to misread both OEM and remanufactured laser toner cartridges. It’s a simple process to reset the low toner messages and get your printer up and functioning again.

Reset the low toner message for DCP/MFC Monochrome printers

Follow these steps to fix the issue you’re experiencing:
1. Open the front toner compartment door.
2. The printer screen should read “front cover is open”
3. press the “clear” button on the printer’s front panel.
4. Printer will say “Replace Drum?”
5. Here do not press 1 but instead type in “*00″ on the keypad. Star zero zero.
6. The screen will say “Accepted”. Close the door and it will reset the low toner message.

Reset the low toner message for HL Series printers

These steps will help you reset the low toner message:

1. Open front door
2. Turn off printer
3. While holding down the GO button, turn printer back on
4. When all four LEDs light up release GO button. All LEDs will turn off
5. Press the GO button 2 times. The 3 LEDs (toner, drum, paper) will light up solid
6. Press the GO button 5 times
7. Paper light will be blinking
8. At this point the toner end-of-life condition has been reset. Close front door.
*Also, just a reminder, timing is important here so don’t pause between button presses*

--
You received this message because you are subscribed to the Google Groups "cwtechnicalsupport" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cwtechnicalsupp...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

david monuse

unread,
Aug 16, 2014, 7:19:44 AM8/16/14
to cwtechnic...@googlegroups.com
how do you reset low toner on Lemark 364
 
 All The Best,
 David


Robert Bohacek

unread,
Aug 16, 2014, 11:36:47 AM8/16/14
to CW Technical Google Groups
You need a $3.00 x264/x364 chip from Static or Uninet...

The machine could also say Replace PC drum instead of low toner. In this case you would need to open cartridge door and Press&Hold the cancel button.



Kind Regards,

Robert Bohacek
Business Direct Sales - VIP Accounts
Cartridge World
813-288-8465 Office
www.cwtampabay.com

Now every office can print
super-fast color affordably.


Printer Repair and Printer Cartridges at the Same Place...


To learn more about us, click here: http://cartridgeworldusa.com/LearnMore

Reply all
Reply to author
Forward
0 new messages