Alfaobd License Generator Download
Ettie Wilkoff
- Install the app on your PC, open it and switch to the About tab. Click on the "Purchase license on Paddle.com" button. The web purchase screen opens, see Method 1. In case of an issue contact in...@alfaobd.com
Note: License activattion as described is not supported on Windows XP. To activate the license on XP contact in...@alfaobd.com attaching the License request code from the About screen of the app.
First deactivate the license on the current PC. Open the app, switch to the About tab, click on the "Activate license (Paddle.com)" button, and click "Deactivate" on the activation window. Then, on the new PC, install and open the app and activate the license as described above with the same activation data.
In case your PC has crashed and you can't deactivate the license, contact in...@alfaobd.com to delete the old activation.
NOTE: The customers who purchased the license before Aug. 11th 2020, or the customers who purchased the license from the distributors, please use the old activation model. Use the "Send activation request" feature to send the Llicense request code to in...@alfaobd.com (Or just send the About screen photo or screenshot with the request visible).
2. ELM327-based Bluetooth/USB/ WLAN interface. There are many suppliers of such interfaces, make sure the version is 1.3 and above. The interface supports all CAN and most of the K-Line units. A rule of thumb is that the K-Line units with connection baud rate less than 10400 bps is not supported. Because the quality of ELM327 clones is not stable, it is recommended to use tested interfaces (see www.alfaobd.com for details).
AlfaOBD software for diagnostics of the cars produced by FCA: Alfa-Romeo, Fiat, Lancia, Dodge, RAM, Chrysler, Jeep. Peugeot (Boxer), Citroen (Jumper) are also covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available.
NOTE: FCA cars of MY2018 has security gateway module (SGW) installed. It blocks the third-party diagnostics. To have full access to the diagnostic features, please use an SGW bypass. Owners of Fiat 500X/JEEP Renegade/Compass (MP), please make sure that the bypass supports the second high-speed CAN bus, the one that is connected to the pins 12&13 of the car OBD plug.
NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact [email protected].
Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.
NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.
For the details of configuration of connection to interface and car see application help available on _Android_Help.pdf
AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- electronic key and RF remote control programming
For the full list of supported control units visit
Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via application Settings menu.
NOTE: If plots are not updated, make sure that "Force GPU rendering" is off in "Settings"->"Developer Option".