Z-gap good vs bad

[EricDesign]

Here's a good example of a poor fit of Z-gap CubeX, as you can see the difference in distance between the two z-gap 18.59 is very nice and 18.80 is bad a difference of this is only .11 and such a disaster at printing so take the time to adjust your z-gap and make small test even if all work well. To adjust the Z-Gap the single go to the menu and select your CubeX Z-gap option.

EricDesign 

[Treemagnet]

thats good info what version of firmware are you using

Tom

[EricDesign]

i use 1.4 for now for the cartridge problem

[Treemagnet]

would be nice to use bulk filament and 1.7 firmware

[EricDesign]

this is not possible with 1.07 ... 

if I had known all cartridge problem with Cubex I would buy a makerbot replicator2...