Lurker Sector ips
Bruce Pawley
Hi guys,
The lurker sector clients are now ready to be moved.
Your ip ranges are as follows
Please use the yellow highlighted ip as your rb with a network of 172.26.56.125. and the rest of your range can be used for your pcs or NAT as required.
If anyone needs help moving over, Or needs me to do it for you, let me know.
Would the rest of you let me know once done
Keith, you should be able to use your new range 172.26.56.112/28 Wug Gateway 172.26.56.126.. please don’t use 172.26.56.125, as that is your sector.
Thanks
Bruce
stacy gomm
Good evening Bruce
I would like some help with changing the ip address in my wind box as I dont have a clue on what is going on in there .😨
Please let me know what is needed on my side . And what I need to change my pc ip address to and so on .
Thank you
Saviger
--
You received this message because you are subscribed to the Google Groups "CTWUG Bothasig" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ctwug-bothasi...@googlegroups.com.
To post to this group, send email to ctwug-b...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/ctwug-bothasig/006401d0b361%249806b380%24c8141a80%24%40gmail.com.
Bruce Pawley
Hi Stacy,
I’m going to give you instructions on what needs to change, then hopefully others can learn too.
If you break it, I can always fix it for you, so don’t worry too much.(have a go)
I have changed your ip range to 172.26.56.48/28, originally I had given you a /29, which probably wouldn’t be enough.
1st your ip needs to change in Winbox – IP – Addresses
On your WugLink, we change your ip to 172.26.56.62 and your network to 172.26.56.125 (this is the IP of the sector)
Once that is done, the RB is able to talk to the Sector.
You will also need to change the IP on ether1, since you use WUG ips in your LAN, you don’t need to change any NAT. your LAN IP will be 172.26.56.62/28 and your pcs will need to change to anything between 172.26.56.49-61
Now that the RB can talk to the sector, and your pc with its new IP can talk to the RB, you just need to update your WUG route
In Winbox – IP – Routes
Your Gateway needs to change to 172.26.56.125.
Once that is done, you should be able to access CTWUG IPs again.
Don’t forget to update wind, and if you get a DNS error on TT, give it a few hours, then let me know if it still doesn’t come right.
Bruce
To view this discussion on the web, visit https://groups.google.com/d/msgid/ctwug-bothasig/CADGh6EAR2%3DawgCLUcucxK_tfJQ%3D_qY4pa5W-88AqqfzOYB-nGA%40mail.gmail.com.
stacy gomm
Hello Bruce
Thanx for the info .. most appreciated. .
I will give it a shot tonight . And let you know if it works .
Thanx again
Saviger
To view this discussion on the web, visit https://groups.google.com/d/msgid/ctwug-bothasig/00fa01d0b3fd%24abc6ba90%2403542fb0%24%40gmail.com.
stacy gomm
Good evening Bruce .
I have finaly had the time to make the ip changes to my wind box and wind .
I cannot connect to the wug now. I am connected to the sector .
In wind there is a section called Subnets
See att.... what must that change to?
And is my ip address correct on wind ??
That is the ip address that my pc is giving me .
When you have a moment can you have a look and see if every thing is correct.
Thanx for the help
Saviger
To view this discussion on the web, visit https://groups.google.com/d/msgid/ctwug-bothasig/00fa01d0b3fd%24abc6ba90%2403542fb0%24%40gmail.com.
Bruce Pawley
All looks good to me,
Your subnet on wind should be
172.26.56.48-172.26.56.66
All should be working, send me the error if you are getting on.
To view this discussion on the web, visit https://groups.google.com/d/msgid/ctwug-bothasig/CADGh6ECE%2BPAdBvFS_FbnFxhAOayE0dvh95mP0H7RsXea6xA_jA%40mail.gmail.com.
Mark
0.0.0.0 subnet ?
__________ Information from ESET Smart Security, version of virus signature database 11903 (20150707) __________
The message was checked by ESET Smart Security.
http://www.eset.com
__________ Information from ESET Smart Security, version of virus signature database 11903 (20150707) __________
The message was checked by ESET Smart Security.
http://www.eset.com
--
You received this message because you are subscribed to the Google Groups "CTWUG Bothasig" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ctwug-bothasi...@googlegroups.com.
To post to this group, send email to ctwug-b...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/ctwug-bothasig/009201d0b8d9%243deb7700%24b9c26500%24%40gmail.com.
__________ Information from ESET Smart Security, version of virus signature database 11903 (20150707) __________
The message was checked by ESET Smart Security.
http://www.eset.com
Mark
0.0.0.0 sorry RB ip ??
From: ctwug-b...@googlegroups.com [mailto:ctwug-b...@googlegroups.com] On Behalf Of Bruce Pawley
Sent: 07 July 2015 07:21 PM
To: ctwug-b...@googlegroups.com
__________ Information from ESET Smart Security, version of virus signature database 11903 (20150707) __________
The message was checked by ESET Smart Security.
http://www.eset.com
__________ Information from ESET Smart Security, version of virus signature database 11903 (20150707) __________
The message was checked by ESET Smart Security.
http://www.eset.com
--
You received this message because you are subscribed to the Google Groups "CTWUG Bothasig" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ctwug-bothasi...@googlegroups.com.
To post to this group, send email to ctwug-b...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/ctwug-bothasig/009201d0b8d9%243deb7700%24b9c26500%24%40gmail.com.
