Implementing exec-timeout command

[Anuradha Jayakody]

Implementing exec-timeout command

Description: exec-timeout command is used to configure the number of minutes without terminal activity before the session is automatically ended.

Use the command in Privileged command mode to set the timeout for this session only. Use the command in Line configuration command mode to set the timeout for this and future sessions.

Syntax: exec-timeout min [sec]

Instructions:

1. Enter into global Configuration mode

2. Enter into line console 0 mode

3. Set the time using exec-timeout command

4. Exit to privileged mode

R1>enable
R1#configure terminal
R1(config)#line console 0
R1(config-line)#exec-timeout 15 0
R1(config-line)#end

--
Best Regards,

Anuradha Jayakody
B.Sc (Hons.)(Greenwich),(Msc (IS),PGD(IT),CITP ,MIEEE,MIET,MBCS,CCNA,CCAI,MCP)

Lecturer/Systems Engineer
ECE Department/IT Services Division
Sri Lanka Institute of Information Technology
New Kandy Road,
Malabe
Sri Lanka

Phone : +94-11-2413900 /6/7/8/ EXT:4720
E-mail : anura...@sliit.lk
Skype : anuradha73