Release Candidate 3

[Mark Lesswing]

VieleRETS 1.1.6, Release Candidate 3 is now available on the website.

Changes from Release Canidate 2:

- Removed KEEP_ALIVE, RETS_DEFAULT_PORT and ENCODE_REQUESTS from SOURCE
definitions to simplify RETS definition.
- Verified connection to SolidEarth servers.

--
Mark

[Boon Lim]

Did you get a chance to add the POST for data and GET for image? I
didn't see that in the new release unless I have to uncheck the POST and
it will automatically use POST for data and GET for image.

Thanks

Boon

_______________________________________________
viele-dev mailing list
viel...@crt.realtors.org
http://mail.crt.realtors.org/mailman/listinfo/viele-dev
< br>

[Mark Lesswing]

Yes, it should be there, sorry. GetObject will always use GET even if
the data section is set to POST.

Man, wierd behavior on the part of the server vendor. Please chack that
this works.

On Tue, 27 May 2008 14:13, Boon Lim wrote:
> Did you get a chance to add the POST for data and GET for image? I
> didn't see that in the new release unless I have to uncheck the POST
> and
> it will automatically use POST for data and GET for image.
>
> Thanks
>
> Boon
>
> -----Original Message-----
> From: viele-de...@crt.realtors.org
> [mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
> Sent: Tuesday, May 27, 2008 12:05 PM
> To: viel...@crt.realtors.org
> Subject: [viele-dev] Release Candidate 3
>
> VieleRETS 1.1.6, Release Candidate 3 is now available on the website.
>
> Changes from Release Canidate 2:
>

> - Removed KEEP_ALIVE, RETS_DEFAULT_PORT and ENCODE_REQUE STS from SOURCE

> definitions to simplify RETS definition.
> - Verified connection to SolidEarth servers.
>
> --
> Mark
> _______________________________________________
> viele-dev mailing list
> viel...@crt.realtors.org
> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>
> _______________________________________________
> viele-dev mailing list
> viel...@crt.realtors.org
> http://mail.crt.realtors.org/mailman/listinfo/viele-dev

--Mark

[Marty Reed]

Fantastic, thank you.

-----Original Message-----
From: viele-de...@crt.realtors.org
[mailto:viele-de...@crt.realtors.org] On Behalf Of Boon Lim
Sent: Tuesday, May 27, 2008 2:13 PM
To: For discussion on the development of viele rets
Subject: Re: [viele-dev] Release Candidate 3

Did you get a chance to add the POST for data and GET for image? I
didn't see that in the new release unless I have to uncheck the POST and
it will automatically use POST for data and GET for image.

Thanks

Boon

-----Original Message-----
From: viele-de...@crt.realtors.org
[mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
Sent: Tuesday, May 27, 2008 12:05 PM
To: viel...@crt.realtors.org
Subject: [viele-dev] Release Candidate 3

VieleRETS 1.1.6, Release Candidate 3 is now available on the website.

Changes from Release Canidate 2:

- Removed KEEP_ALIVE, RETS_DEFAULT _PORT and ENCODE_REQUESTS from SOURCE

[Boon Lim]

1. Looks like I have to uncheck POST style HTTP Requests so that it uses
GET with marketlinx RETS.

2. Extract administration don't really work properly. Have to edit
manually.

3. Images download on and off. Will test further why it's not
downloading all the time. 1.1.5 works fine..

Thanks

Boon

-----Original Message-----
From: viele-de...@crt.realtors.org
[mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
Sent: Tuesday, May 27, 2008 12:29 PM
To: For discussion on the development of viele rets
Subject: Re: [viele-dev] Release Candidate 3

Yes, it should be there, sorry. GetObject will always use GET even if
the data section is set to POST.

Man, wierd behavior on the part of the server vendor. Please chack that
this works.

On Tue, 27 May 2008 14:13, Boon Lim wrote:

> Did you get a chance to add the POST for data and GET for image? I

> didn't se e that in the new release unless I have to uncheck the POST

> and it will automatically use POST for data and GET for image.
>
> Thanks
>
> Boon
>
> -----Original Message-----
> From: viele-de...@crt.realtors.org
> [mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
> Sent: Tuesday, May 27, 2008 12:05 PM
> To: viel...@crt.realtors.org
> Subject: [viele-dev] Release Candidate 3
>
> VieleRETS 1.1.6, Release Candidate 3 is now available on the website.
>
> Changes from Release Canidate 2:
>

> - Removed KEEP_ALIVE, RETS_DEFAULT_PORT and ENCODE_REQUESTS from

> SOURCE definitions to simplify RETS definition.
> - Verified connection to SolidEarth servers.
>
> --
> Mark
> _______________________________________________
> viele-dev mailing list
> viel...@crt.realtors.org
> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>
> ____________________________________ ___________
> viele-dev mailing list
> viel...@crt.realtors.org
> http://mail.crt.realtors.org/mailman/listinfo/viele-dev

--Mark

[Mark Lesswing]

Could you please be more specific on #2 below?

What did not configure in EXTRACT?

Boon Lim wrote:
> 1. Looks like I have to uncheck POST style HTTP Requests so that it uses
> GET with marketlinx RETS.
>
> 2. Extract administration don't really work properly. Have to edit
> manually.
>
> 3. Images download on and off. Will test further why it's not
> downloading all the time. 1.1.5 works fine..
>
>
> Thanks
>
> Boon
>
> -----Original Message-----
> From: viele-de...@crt.realtors.org
> [mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
> Sent: Tuesday, May 27, 2008 12:29 PM
> To: For discussion on the development of viele rets
> Subject: Re: [viele-dev] Release Candidate 3
>
> Yes, it should be there, sorry. GetObject will always use GET even if
> the data section is set to POST.
>

> Man, wierd behavior on the part of the server vendor. P lease chack that

> this works.
>
> On Tue, 27 May 2008 14:13, Boon Lim wrote:
>> Did you get a chance to add the POST for data and GET for image? I

>> didn't see that in the new release unless I have to uncheck the POST

>> and it will automatically use POST for data and GET for image.
>>
>> Thanks
>>
>> Boon
>>
>> -----Original Message-----
>> From: viele-de...@crt.realtors.org
>> [mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
>> Sent: Tuesday, May 27, 2008 12:05 PM
>> To: viel...@crt.realtors.org
>> Subject: [viele-dev] Release Candidate 3
>>
>> VieleRETS 1.1.6, Release Candidate 3 is now available on the website.
>>
>> Changes from Release Canidate 2:
>>
>> - Removed KEEP_ALIVE, RETS_DEFAULT_PORT and ENCODE_REQUESTS from
>> SOURCE definitions to simplify RETS definition.
>> - Verified connection to SolidEarth servers.
>>
>> --
>> Mark

>> ______________ _________________________________
>> viele-dev mailing list
>> viel...@crt.realtors.org
>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>>
>> _______________________________________________
>> viele-dev mailing list
>> viel...@crt.realtors.org
>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
> --Mark
> _______________________________________________
> viele-dev mailing list
> viel...@crt.realtors.org
> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>

--
Mark

[Boon Lim]

Thanks Mark for all the help.

1. Sorry for #2, I meant that I get a blank screen when I try to create
a new Extract.

2. Also, When I tried to edit the original Extract config from 1.1.5, it
won't let me save the settings. This is for extracting to a CSV file and
when I tried to Edit -> Extract -> Data Map fields and keeps reseting.

> Man, wierd behavior on the part of the server vendor. Please chack

> that this works.
>
> On Tue, 27 May 2008 14:13, Boon Lim wrote:
>> Did you get a chance to add the POST for data and GET for image? I
>> didn't see that in the new release unless I have to uncheck the POST
>> and it will automatically use POST for data and GET for image.
>>
>> Thanks
>>
>> Boon
>>
>> -----Original Message-----
>> From: viele-de...@crt.realtors.org
>> [mailto:viele-de...@crt.realtors.org] On Behalf Of Mark
>> Lesswing
>> Sent: Tuesday, May 27, 2008 12:05 PM
>> To: viel...@crt.realtors.org
>> Subject: [viele-dev] Release Candidate 3
>>
>> VieleRETS 1.1.6, Release Candidate 3 is now available on the website.
>>
>> Changes from Release Canidate 2:
>>
>> - Removed KEEP_ALIVE, RETS_DEFAULT_PORT and ENCODE_REQUESTS from
>> SOURCE definitions to simplify RETS definition.
>> - Verified connection to SolidEarth servers.
>>
>> --
>> Mark

[Mark Lesswing]

Ahh....

I be5t you received an error in your http log! The verion I released
does not have the Open-Realty section in it!

I thought Open-Realty users had long since moved to Tranparent
Technologies RETS engine. I'll put back what I had before.

Thanks.

>>> SOURCE definit ions to simplify RETS definition.

>>> - Verified connection to SolidEarth servers.
>>>
>>> --
>>> Mark
>>> _______________________________________________
>>> viele-dev mailing list
>>> viel...@crt.realtors.org
>>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>>>
>>> _______________________________________________
>>> viele-dev mailing list
>>> viel...@crt.realtors.org
>>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>> --Mark
>> _______________________________________________
>> viele-dev mailing list
>> viel...@crt.realtors.org
>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>>
>
> --
> Mark

--Mark

[Boon Lim]

I bet a lot of us are still using vieleRETS vs Transparent Technologies
RETS.

Thanks

Boon

-----Original Message-----
From: viele-de...@crt.realtors.org
[mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
Sent: Wednesday, May 28, 2008 3:59 PM
To: viel...@crt.realtors.org
Subject: Re: [viele-dev] Release Candidate 3

Ahh....

I be5t you received an error in your http log! The verion I released
does not have the Open-Realty section in it!

I thought Open-Realty users had long since moved to Tranparent
Technologies RETS engine. I'll put back what I had before.

Thanks.

On Wed, 28 May 2008 11:10, Boon Lim wrote:
> Thanks Mark for all the help.
>
> 1. Sorry for #2, I meant that I get a blank screen when I try to
> create a new Extract.
>
> 2. Also, When I tried to edit the original Extract config from 1.1.5,

> it won't let me save the settings . This is for extracting to a CSV

>>> SOURCE definitions to simplify RETS definition.

[Mark Lesswing]

Perhaps, but I know those guys and their engine is probably faster than
VieleRETS:)

I have an old version of OR, so I'll go ahead and restore the
functionality. All I have to do is port it to AJAX.

On Wed, 28 May 2008 18:03, Boon Lim wrote:
> I bet a lot of us are still using vieleRETS vs Transparent Technologies
> RETS.
>
> Thanks
>
> Boon
>
> -----Original Message-----
> From: viele-de...@crt.realtors.org
> [mailto:viele-de...@crt.realtors.org] On Behalf Of Mark Lesswing
> Sent: Wednesday, May 28, 2008 3:59 PM
> To: viel...@crt.realtors.org
> Subject: Re: [viele-dev] Release Candidate 3
>
> Ahh....
>
> I be5t you received an error in your http log! The verion I released
> does not have the Open-Realty section in it!
>
> I thought Open-Realty users had long since moved to Tranparent
> Technologies RETS engine. I'll put back what I had before.
>
> Thanks.
>
> On Wed, 28 May 2008 11:10, Boon Lim wrote:
>> Thanks Mark for all the help.
>>
>> 1. Sorry for #2, I meant that I get a blank screen when I try to
>> create a new Extract.
>>
>> 2. Also, When I tried to edit the original Extract config from 1.1.5,

>> it won't let me save the settings. This is for extracting to a CSV

--Mark

[Josh Rubin]

There are several of us who prefer the open source, instead of purchasing a
RETS software. Mark me down for one.

----- Original Message -----
From: "Mark Lesswing"
To:
Sent: Wednesday, May 28, 2008 6:59 PM
Subject: Re: [viele-dev] Release Candidate 3


> Ahh....
>
> I be5t you received an error in your http log! The verion I released
> does not have the Open-Realty section in it!
>
> I thought Open-Realty users had long since moved to Tranparent
> Technologies RETS engine. I'll put back what I had before.
>
> Thanks.
>
> On Wed, 28 May 2008 11:10, Boon Lim wrote:
>> Thanks Mark for all the help.
>>
>> 1. Sorry for #2, I meant that I get a blank screen when I try to create
>> a new Extract.
>>
>> 2. Also, When I tried to edit the original Extract config from 1.1.5,
>> it

>> won't let me save the settings. This is for ex tracting to a CSV file

[Mark Lesswing]

Hmm. I'm not sure. They gave me access to a server to get things
worked out and auto-detection, data and images all came down.

To be safe, you might want to ask because I might have been hiting a
staging server. When folks give me access, I do my thing then delete
credentials.

On Tue, 27 May 2008 14:29, Tim Golden wrote:
> Hi Mark,
>
> In your note you stated verified with SolidEarth servers.
>
> Is this the SolidEarth http://www.solidearth.com/company.htm vendor you
> are refering to?
>
> The reason I ask is that I was attempting to interface with them 2
> weeks ago and they seemed to have quite a few conformance issues and
> they asked me to hold off until they got their issues resolved so I am
> wondering if I should give it another shot??
>
> Regards,
>
> Tim
>
> --------------------
>
>> Date: Tue, 27 May 2008 14:05:01 -0500
>> From: mles...@crt.realtors.org

>> To: viel...@crt.realtors.org
>> Subject: [viele-dev] Release Candidate 3
>>
>> VieleRETS 1.1.6, Release Candidate 3 is now available on the website.
>>
>> Changes from Release Canidate 2:
>>
>> - Removed KEEP_ALIVE, RETS_DEFAULT_PORT and ENCODE_REQUESTS from
>> SOURCE
>> definitions to simplify RETS definition.
>> - Verified connection to SolidEarth servers.
>>
>> --
>> Mark
>> _______________________________________________
>> viele-dev mailing list
>> viel...@crt.realtors.org
>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev

--Mark

[Tim Golden]

Hi Mark,

In your note you stated verified with SolidEarth servers.

Is this the SolidEarth http://www.solidearth.com/company.htm vendor you are refering to?

The reason I ask is that I was attempting to interface with them 2 weeks ago and they seemed to have quite a few conformance issues and they asked me to hold off until they got their issues resolved so I am wondering if I should give it another shot??

Regards,

Tim

[Damon]

Mark,

Please don't stop supporting Open Realty! Besides the cost, some of us
would rather use have a crt.realtors.org solution rather than a
proprietary one.

Thanks,

Damon

----- Original Message -----
From: "Mark Lesswing"
To:
Sent: Wednesday, May 28, 2008 5:59 PM
Subject: Re: [viele-dev] Release Candidate 3


> Ahh....
>
> I be5t you received an error in your http log! The verion I
> released
> does not have the Open-Realty section in it!
>
> I thought Open-Realty users had long since moved to Tranparent
> Technologies RETS engine. I'll put back what I had before.
>
> Thanks.
>
> On Wed, 28 May 2008 11:10, Boon Lim wrote:
>> Thanks Mark for all the help.
>>
>> 1. Sorry for #2, I meant that I get a blank screen when I try to
>> create
>> a new Extract.
>>

>> 2. Also, When I tried to edit t he original Extract config from
>> 1.1.5,
>> it
>> won't let me save the settings. This is for extracting to a CSV

>>>> Sent: Tuesday, May 27, 2008 12:05 PM
>>>> To: viel...@crt.realtors.org
>>>> Subject: [viele-dev] Release Candidate 3
>>>>
>>>> VieleRETS 1.1.6, Release Candidate 3 is now available on the
>>>> website.
>>>>
>>>> Changes from Release Canidate 2:
>>>>
>>>> - Removed KEEP_ALIVE, RETS_DEFAULT_PORT and ENCODE_REQUESTS from
>>>> SOURCE definitions to simplify RETS definition.
>>>> - Verified connection to SolidEarth servers.
>>>>
>>>> --
>>>> Mark
>>>> _______________________________________________

>>>> viele-dev mailing list
>>>> viel...@crt.realtors.org
>>>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>>>>

>>>> _________________________________ ______________
>>>> viele-dev mailing list
>>>> viel...@crt.realtors.org
>>>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev

>>> --Mark

>>> _______________________________________________
>>> viele-dev mailing list
>>> viel...@crt.realtors.org
>>> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>>>
>>
>> --
>> Mark

> --Mark