CalREDD implimentation

[Matthew Herman]

Hello All, First thank you to all that make this RETS client. I have been a long time users and cannot thank you enough. Being that I have used this program for quite a while, I feel that I have a good feel for this program which makes the below problem even more perplexing... My problem....Currently our MLS is switching from Paragon to CalREDD. I have access to the CalREDD RETs feed for testing for the switch over in January. It appears that I have everything setup correctly to query the database and pull records. When I go to query CalREDD I get the following error... This service is temporarily not available While processing DMQL Query: "(Status=|3,2,1,0,7,6,5,4,9,8)", the server returned the message: "format error, use packet sniffer" Before I contact CalREDD, does anybody have an idea on what is happening on the client side. I have played around with a couple of different DMQL Queries with the same outcome. Thanks in advance... Regards, Matthew www.MatthewHerman.com

[Nile Thayne]

Matthew,

I saw the exact same response from a server that I was trying to access with VieleRETS 1.8 RC1. I was able to make a change that resolved this problem for me. The details are in a recent post. Here is the archive link: http://mail.crt.realtors.org/pipermail/viele-dev/2009-December/002338.html

The description I gave is not very clear. It was intended to be seen by the guys who maintain VieleRETS, so it probably doesn't do you much good. If you would like, I can send you a patched file that you can try. I would need to make sure that we are using the same version of VieleRETS.

-Nile

----- Original Message -----
Hello All,

First thank you to all that make this RETS client. I have been a long time users and cannot thank you enough. Being that I have used this program for quite a while, I feel that I have a good feel for this program which makes the below problem even more perplexing...

My problem....Currentl y our MLS is switching from Paragon to CalREDD. I have access to the CalREDD RETs feed for testing for the switch over in January. It appears that I have everything setup correctly to query the database and pull records. When I go to query CalREDD I get the following error...

[Matthew Herman]

All, Thank you all for the response... Nile was dead one with his answer. I am using 8.1 RC. The post (http://mail.crt.realtors.org/pipermail/viele-dev/2009-December/002338.html) talked about editing a file to use the same credentials again during the RETs conversation. I made the changes and it worked. Thank you all... Now I am running into this memory problem while downloading. I will save that for another post if I cannot figure it out... Happy New Year to All Regards, Matthew -----Original Message----- Date: 2009-12-29 15:42:06 From: gonef...@evertek.net To: viel...@crt.realtors.org Subject: Re: [viele-dev] CalREDD implimentation Yes I remember seeing that post, I was hope to hear a response. If you would send me the file that would be great, and save me some experimenting. Ken From: viele-de...@crt.realtors.org [mailto:viele-de...@crt.realtors.org] On Behalf Of Nile Thayne Sent: Tuesday, December 29, 2009 5:28 PM To: viel...@crt.realtors.org Subject: Re: [viele-dev] CalREDD implimentation Matthew, I saw the exact same response from a server that I was trying to access with VieleRETS 1.8 RC1. I was able to make a change that resolved this problem for me. The details are in a recent post. Here is the archive link: http://mail.crt.realtors.org/pipermail/viele-dev/2009-December/002338.html The description I gave is not very clear. It was intended to be seen by the guys who maintain VieleRETS, so it probably doesn't do you much good. If you would like, I can send you a patched file that you can try. I would need to make sure that we are using the same version of VieleRETS. -Nile ----- Original Message ----- Hello All, First thank you to all that make this RETS client. I have been a long time users and cannot thank you enough. Being that I have used this program for quite a while, I feel that I have a good feel for this program which makes the below problem even more perplexing... My problem....Currently our MLS is switching from Paragon to CalREDD. I have access to the CalREDD RETs feed for testing for the switch over in January. It appears that I have everything setup correctly to query the database and pull records. When I go to query CalREDD I get the following error... This service is temporarily not available While processing DMQL Query: "(Status=|3,2,1,0,7,6,5,4,9,8)", the server returned the message: "format error, use packet sniffer" Before I contact CalREDD, does anybody have an idea on what is happening on the client side. I have played around with a couple of different DMQL Queries with the same outcome. Thanks in advance... Regards, Matthew www.MatthewHerman.com No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.722 / Virus Database: 270.14.122/2591 - Release Date: 12/29/09 01:47:00 If you do not wish to receive future emails, please click the link to Unsubscribe: https://www.topproduceronline.com/osu.asp?p={ab099dd2-15ff-4304-b8c5-bb6665c8fa17}

[Ken Larsen]

Yes I remember seeing that post, I was hope to hear a response. If you would send me the file that would be great, and save me some experimenting.



Ken



From: viele-de...@crt.realtors.org [mailto:viele-de...@crt.realtors.org] On Behalf Of Nile Thayne
Sent: Tuesday, December 29, 2009 5:28 PM
To: viel...@crt.realtors.org
Subject: Re: [viele-dev] CalREDD implimentation



Matthew,

I saw the exact same response from a server that I was trying to access with VieleRETS 1.8 RC1. I was able to make a change that resolved this problem for me. The details are in a recent post. Here is the archive link: http://mail.crt.realtors.org/pipermail/viele-dev/2009-December/002338.html

The description I gave is not very clear. It was intended to be seen by the guys who maintain VieleRETS, so it probably doesn't do you much good. If you would like, I can send you a patched file that you can try. I would n eed to make sure that we are using the same version of VieleRETS.

-Nile

----- Original Message -----
Hello All,

First thank you to all that make this RETS client. I have been a long time users and cannot thank you enough. Being that I have used this program for quite a while, I feel that I have a good feel for this program which makes the below problem even more perplexing...

My problem....Currently our MLS is switching from Paragon to CalREDD. I have access to the CalREDD RETs feed for testing for the switch over in January. It appears that I have everything setup correctly to query the database and pull records. When I go to query CalREDD I get the following error...

This service is temporarily not available

While processing DMQL Query: "(Status=|3,2,1,0,7,6,5,4,9,8)",
the server returned the message: "format error, use packet sniffer"

Before I contact CalREDD, does anybody have an idea on what is ha ppening on the client side. I have played around with a couple of different DMQL Queries with the same outcome.

[gonefishin]

I am wondering if the formatting of your status codes has changed. Are you entering them in manually? Look in the metadata and see what it shows in there.


--- ma...@matthewherman.com wrote:

From: "Matthew Herman"
To:
Cc:
Subject: [viele-dev] CalREDD implimentation
Date: Sun, 27 Dec 2009 19:09:43 -0700

Hello All,

First thank you to all that make this RETS client. I have been a long time users and cannot thank you enough. Being that I have used this program for quite a while, I feel that I have a good feel for this program which makes the below problem even more perplexing...

My problem....Currently our MLS is switching from Paragon to CalREDD. I have access to the CalREDD RETs feed for testing for the switch over in January. It appears that I have everything setup correctly to query the database and pull records. When I go to query CalREDD I get the following error...

This service is temporarily not available

While processing DMQL Query: "(Status=|3,2,1,0,7,6,5,4,9,8)",
the server returned the message: "format error, use packet sniffer"

Before I contact CalREDD, does anybody have an idea on what is happening on the client side. I have played around with a couple of different DMQL Queries with the same outcome.

Thanks in advance...

Regards,
Matthew
www.MatthewHerman.com

_______________________________________________
viele-dev mailing list
viel...@crt.realtors.org
http://mail.crt.realtors.org/mailman/listinfo/viele-dev