VieleRETS v1.1.8 unable to login to RealTracs MRIS server
32 views
Skip to first unread message
Jim Ekleberry
Oct 9, 2009, 3:20:36 PM10/9/09
to crt-viele-r...@googlegroups.com
No joy using the settings specified. I tried both Post and Get requests.
________________________________
From: David Work
To: For discussion on the development of viele rets
Sent: Fri, October 9, 2009 2:16:59 PM
Subject: Re: [viele-dev] VieleRETS v1.1.8 unable to login to RealTracs MRIS server
Try "MRIS Conduit" in the Application Name and "1.1" (or version) in Application Version.
On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
I have just installed VieleRETS v1.1.8 RC1 and am attempting to create a Source configuration.
>
>I have entered all of the proper information but it is not connecting. When I contacted RealTracs, they said that the UserAgent string also needed to be based with the login information.
>
>Has anyone else encountered this and more importantly how do I resolve this issue so I can login to the server?
>
>Jim
>
>
>______ _________________________________________
>viele-dev mailing list
>viel...@crt.realtors.org
>http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>
David Work
Oregon Internet Properties
(541) 942-7088 or (800) 489-0354
Fax (541) 942-1892
http://www.oip.net
"Give a man a program -- frustrate him for a day; Teach him how to code -- frustrate him for a lifetime."
________________________________
From: David Work
To: For discussion on the development of viele rets
Sent: Fri, October 9, 2009 2:16:59 PM
Subject: Re: [viele-dev] VieleRETS v1.1.8 unable to login to RealTracs MRIS server
Try "MRIS Conduit" in the Application Name and "1.1" (or version) in Application Version.
On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
I have just installed VieleRETS v1.1.8 RC1 and am attempting to create a Source configuration.
>
>I have entered all of the proper information but it is not connecting. When I contacted RealTracs, they said that the UserAgent string also needed to be based with the login information.
>
>Has anyone else encountered this and more importantly how do I resolve this issue so I can login to the server?
>
>Jim
>
>
>______ _________________________________________
>viele-dev mailing list
>viel...@crt.realtors.org
>http://mail.crt.realtors.org/mailman/listinfo/viele-dev
>
David Work
Oregon Internet Properties
(541) 942-7088 or (800) 489-0354
Fax (541) 942-1892
http://www.oip.net
"Give a man a program -- frustrate him for a day; Teach him how to code -- frustrate him for a lifetime."
Jim Ekleberry
Oct 9, 2009, 4:41:55 PM10/9/09
to crt-viele-r...@googlegroups.com
The response I received from RealTrac is:
>From the RETS spec:
-----------------------
The HTTP header of any messages sent from the client MUST contain
User-Agent. This header field contains information about the user agent
originating the request. All client requests MUST include this field.
This is a standard HTTP header field as defined in RFC 2616.
Example: User-Agent: CMAZilla/4.00
-----------------------
Your VieleRETS client will need a way to supplant the one it is sending
by default. Not sure what it is sending or how to change the value in
the VieleRETS client code. But, I'm sure it is sending some UserAgent
value. However, it must be the one we provided to you.
So now the question is back to how to I provide the UserAgent that RealTrac provided me?
>From the RETS spec:
-----------------------
The HTTP header of any messages sent from the client MUST contain
User-Agent. This header field contains information about the user agent
originating the request. All client requests MUST include this field.
This is a standard HTTP header field as defined in RFC 2616.
Example: User-Agent: CMAZilla/4.00
-----------------------
Your VieleRETS client will need a way to supplant the one it is sending
by default. Not sure what it is sending or how to change the value in
the VieleRETS client code. But, I'm sure it is sending some UserAgent
value. However, it must be the one we provided to you.
So now the question is back to how to I provide the UserAgent that RealTrac provided me?
David Work
Oct 9, 2009, 4:50:37 PM10/9/09
to crt-viele-r...@googlegroups.com
Try putting your User-Agent and version (provided by RealTrac) in the
Application Name and leave the Application Version blank
e.g I can combine them " Application Name MRIS Conduit/1.1
(or I can enter them separately. Both work for me)
where MRIS Conduit is the User-Agent and 1.1 is the version. It worked
for me, but the clue was understanding that Application Name in
Vielerets is the User-Agent
Application Name and leave the Application Version blank
e.g I can combine them " Application Name MRIS Conduit/1.1
(or I can enter them separately. Both work for me)
where MRIS Conduit is the User-Agent and 1.1 is the version. It worked
for me, but the clue was understanding that Application Name in
Vielerets is the User-Agent
On Oct 9, 2009, at 1:41 PM, Jim Ekleberry wrote:
> The response I received from RealTrac is:
>
> From the RETS spec:
>
> -----------------------
> The HTTP header of any messages sent from the client MUST contain
> User-Agent. This header field contains information about the user
> agent
> originating the request. All client requests MUST include this field.
>
> This is a standard HTTP header field as defined in RFC 2616.
> Example: User-Agent: CMAZilla/4.00
> -----------------------
>
> Your VieleRETS client will need a way to supplant the one it is
> sending
> by default. Not sure what it is sending or how to change the value in
> the VieleRETS client code. But, I'm sure it is sending some UserAgent
> value. However, it must be the one we provided to you.
>
> So now the question is back to how to I provide the UserAgent that
> RealTrac provided me?
>
>
> From: David Work
> To: For discussion on the development of viele rets > >
> Sent: Fri, October 9, 2009 2:16:59 PM
> Subject: Re: [viele-dev] VieleRETS v1.1.8 unable to login to
> RealTracs MRIS server
>
> Try "MRIS Conduit" in the Application Name and "1.1" (or version) in
> Application Version.
>
> On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
>
>> I have just installed VieleRETS v1.1.8 RC1 and am attempting to
>> create a Source configuration.
>>
> To: For discussion on the development of viele rets > >
> Sent: Fri, October 9, 2009 2:16:59 PM
> Subject: Re: [viele-dev] VieleRETS v1.1.8 unable to login to
> RealTracs MRIS server
>
> Try "MRIS Conduit" in the Application Name and "1.1" (or version) in
> Application Version.
>
> On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
>
>> I have just installed VieleRETS v1.1.8 RC1 and am attempting to
>> create a Source configuration.
>>
>> I have ente
red all of the proper information but it is not
gonefishin
Oct 9, 2009, 4:47:17 PM10/9/09
to crt-viele-r...@googlegroups.com
As per the previous example I have seen where it needed to be entered-
"MRIS Conduit/1" in the Application Name and "1" (or version) in Application Version.
I am surprised they didnt help walk you through it as I have also seen a completely different set of login information assigned than what was given.
I would suggest calling them to make sure.
"MRIS Conduit/1" in the Application Name and "1" (or version) in Application Version.
I am surprised they didnt help walk you through it as I have also seen a completely different set of login information assigned than what was given.
I would suggest calling them to make sure.
"So now the question is back to how to I provide the UserAgent that RealTrac provided me?"
From: Jim Ekleberry
To: For discussion on the development of viele rets
Subject: Re: [viele-dev] VieleRETS v1.1.8 unable to login to RealTracs MRIS server
Date: Fri, 9 Oct 2009 12:20:36 -0700 (PDT)
No joy using the settings specified. I tried both Post and Get requests.
________________________________
No joy using the settings specified. I tried both Post and Get requests.
________________________________
From:
David Work
To: For discussion on the development of viele rets
Sent: Fri, October 9, 2009 2:16:59 PM
Subject: Re: [viele-dev] VieleRETS v1.1.8 unable to login to RealTracs MRIS server
Try "MRIS Conduit" in the Application Name and "1.1" (or version) in Application Version.
On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
I have just installed VieleRETS v1.1.8 RC1 and am attempting to create a Source configuration.
>
To: For discussion on the development of viele rets
Sent: Fri, October 9, 2009 2:16:59 PM
Subject: Re: [viele-dev] VieleRETS v1.1.8 unable to login to RealTracs MRIS server
Try "MRIS Conduit" in the Application Name and "1.1" (or version) in Application Version.
On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
I have just installed VieleRETS v1.1.8 RC1 and am attempting to create a Source configuration.
>
>I have entered all of the proper information but it is not connecting. When I contacted RealTracs, they said that the UserAgent string also needed to be based with the login information.
Jim Ekleberry
Oct 9, 2009, 5:03:19 PM10/9/09
to crt-viele-r...@googlegroups.com
I contacted them before I submitted my original message to this board. They were unable to help me stating they were unfamiliar with the VieleRET client.
I was able to get connected after setting application name to the UserAgent for my account and setting the version to blank.
Thanks for all of the help and hopefully the information above will be useful to someone else.
Jim
________________________________
From: gonef...@evertek.net
I was able to get connected after setting application name to the UserAgent for my account and setting the version to blank.
Thanks for all of the help and hopefully the information above will be useful to someone else.
Jim
________________________________
From: gonef...@evertek.net
To: For discussion on the development of viele rets
Sent: Fri, October 9, 2009 3:47:17 PM
David Work
Oct 9, 2009, 3:16:59 PM10/9/09
to crt-viele-r...@googlegroups.com
Try "MRIS Conduit" in the Application Name and "1.1" (or version) in
Application Version.
On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
> I have just installed VieleRETS v1.1.8 RC1 and am attempting to
> create a Source configuration.
>
> I have entered all of the proper information but it is not
> connecting. When I contacted RealTracs, they said that the UserAgent
> string also needed to be based with the login information.
>
> Has anyone else encountered this and more importantly how do I
> resolve this issue so I can login to the server?
>
> Jim
>
>
> _______________________________________________
> viele-dev mailing list
> viel...@crt.realtors.org
> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
David Work
Oregon Internet Properties
(541) 942-7088 or (800) 489-0354
Fax (541) 942-1892
http://www.oip.net
Application Version.
On Oct 9, 2009, at 12:05 PM, Jim Ekleberry wrote:
> I have just installed VieleRETS v1.1.8 RC1 and am attempting to
> create a Source configuration.
>
> I have entered all of the proper information but it is not
> connecting. When I contacted RealTracs, they said that the UserAgent
> string also needed to be based with the login information.
>
> Has anyone else encountered this and more importantly how do I
> resolve this issue so I can login to the server?
>
> Jim
>
>
> _______________________________________________
> viele-dev mailing list
> viel...@crt.realtors.org
> http://mail.crt.realtors.org/mailman/listinfo/viele-dev
David Work
Oregon Internet Properties
(541) 942-7088 or (800) 489-0354
Fax (541) 942-1892
http://www.oip.net
"Give a man a program -- frustrate him fo
r a day; Teach him how to
Jim Ekleberry
Oct 9, 2009, 3:05:26 PM10/9/09
to crt-viele-r...@googlegroups.com
Reply all
Reply to author
Forward
0 new messages