GET_READER_CONFIG send fails: [WinError 10054]

[Tim Mockford]

Hi,
I'm using windows 11 connected directly to an impinj R420 via an ethernet cable (static IPs). I am periodically (every 10-20mins) getting the following error on crossmgr impinj - GET_READER_CONFIG send fails: [WinError 10054] - any ideas how can I fix it? Normal google not overly helpful.

Thanks!

[stuart lynne]

Can you ping the reader?

Can you access the built-in web server?

--
You received this message because you are subscribed to the Google Groups "CrossMgrSoftware" group.
To unsubscribe from this group and stop receiving emails from it, send an email to crossmgrsoftwa...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/crossmgrsoftware/e1e63999-3977-4ee5-9d56-5e64021ef0een%40googlegroups.com.

--

__________O___________
_______-\<,____________
_____(_)/_(_)___________
_________________________
Stuart_Lynne____<stuart...@gmail.com>____604-518-1749(m)__604-461-7532(h)

[Tim Mockford]

Yep - think I got there in the end. The give away was it gets worse over time, the reader was in a (mostly) sealed black waterproof box, it was overheating.

Thanks for responding.

[Jonathan Rosen]

TagReadWrite has an advanced option that displays reader temperature. I'd like to see those advanced options added to crossMGRimpinj, along with a reader temperature threshold warning..

To view this discussion visit https://groups.google.com/d/msgid/crossmgrsoftware/43dbbbe0-2e1b-4c6b-9524-d66e0bd49915n%40googlegroups.com.

[stuart lynne]

By coincidence, I was thinking of adding temperature monitoring earlier yesterday.

My reader boxes use a Renogy Wanderer 10A Solar controller to implement a 12Vdc UPS. That and a couple of 15Ah LifePo4 batteries will run an R1000 for about 8 hours. 

I have an app to monitor the Wanderers to watch voltage levels on the batteries, and noticed a MODBUS register for temp. Thought it might work as a proxy for the box temperature. It might, but it is skewed high as it is measuring the internal temp close to where the voltage inverters are. So that got me thinking about Impinj, and I had a dim memory of them supporting temperature and had Google Gemini confirm that. Since our concern is less the box temp, but the reader temp, this seems like a good solution.

I have been playing with putting an R1000 out as an early reader 300-500m ahead of the finish line. You can get a pair of TP-Link EAP211 WiFi bridges for about $149Cdn. Good for about 800Mhz up to a km line of sight. Have a simple app that grabs the reads and matches them to the CrossMgr xlsx config file, and displays the group composition of approaching riders with about a 15-30 second warning. Works well, and the finish line officials seem to like it.

To view this discussion visit https://groups.google.com/d/msgid/crossmgrsoftware/CAC7BV2zeD3S_S0eLKK8Bp3rD20TSUNGZJw-4yVZaKdky85S7yA%40mail.gmail.com.

[Jonathan Rosen]

Race result has this feature, they call it the announcer line. They add a timing mat 100 ft before the finish to provide identification of approaching riders.

To view this discussion visit https://groups.google.com/d/msgid/crossmgrsoftware/CAJBncHJnLYtWFRfm_nPha2%2BsOW-tGEz%3D7%2BeiMonV3vz4cMiZRw%40mail.gmail.com.