Santo, I haven't forgot about you! I setup my c10 this evening and created a boot disk to make

I tried again this morning, and it works fine. I think my problem last night was that I entered the

Hi Marcus and RanchoHam, If you see this then it is fixed, my thanks to you both for the help.

Hi folks, If anyone is interested, I have written a linux version of ccall with installers for 64bit

I am using WinCUPL. This is a JED file for the prom, and I also have .PLD files for the 22V10 GALS I

A late reply ... Dear Mike, it would be nice to think that you could somehow be reading my sincere

Bill - I think you have an original CCC board set? On Board 1, could you check where the circuit

Mike, you are right. It emulates four IMI7710s. I did think about the HD5/20 but there are some

Bill Sadly I have not yet gotten it to work yet... so to clear my mind. I put it aside for just a bit

There is now a solution to using the Cromemco ZPU in the Altair 8800c! All the credit goes to Mike

Congratulations on getting the board to only 4 layers. As for the unavailable components I suggest

i'm still working with a friend on the restoration of this Cromemco C10, thanks to you we got

One final thought occurred to me. My card cage has no retaining bar for the cards but I recall that

Marcus, very happy for you and the system which will avoid the torments of shipping. This is a very

This machine is a beast. It was used by the US Air Force to plan F16 flights. They bought a bunch of

Thanks for the information David. That's good to know. I'm hoping to get one working one from

Thanks for the extra effort of documenting these systems and their history; often their provenance is

Yup, CS1H and looks like a C-5 next to it. RM On 11/1/25 12:49, Bill Mahoney wrote: Just have to post

>> On Sun, Oct 19, 2025 at 3:39 PM Richard Muse <rlm...@gmail.com> wrote: >> Pdf

Yes any parallel interface dot matrix or daisy wheel should work. I never had one that I could not

Considering how delicate soldered ribbon cable connections can be, I've been wondering what

Here is a clone log. Looks like its working for linux ubuntu@ubuntu-ATOPNUC-MA90:/media/ubuntu/One

Peter I will see if I can trace/ dcument the reset flow and share .. I'm kinda busy these dayd so

If you enter the program (and associated subroutines) as defined on pages 24, 25 and 26; and add the

Excellent; Marcus and I share management of the group but I've been away for a few weeks. Looks

Sounds good Jay will let you know when they come in. Haven't ordered yet, I'll reach out when

I am showing my s100 h/w at the VCF West show. One of my systems is all cromemco h/w. While I was

sounds good yeah I'll go with unregulated input since we'll have at least the smd 7905

I think the other Richard is also referring to Dave McNaughton's High Nibble terminal board with

Ah, thanks for clearing that up for me; nice to hear that it works with both a WDI and a WDI-II. I