Now Sms Mms Gateway V5.51 Serial
Eliora Shopbell
I had this problem and it has nothing whatsoever to do with GSX2. It's a Orbx problem. Go to where your "NA Pacific Fjords" folder is installed ...then FTX_NA, then FTX_NA_PFJ05_Scenery open it and switch off the 3 folders shown below. You will find that the gateway is now removed.
The default route that the gateway parameter creates in ifupdown2 does not install in FRR, therefore does not redistribute into other routing protocols. Define a static default route instead, which installs in FRR and redistributes, if needed.
The PLX50 Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the PLX51-DNPS gateway, connections with controllers and devices.
The Mediola Gateway is a multi-protocol, mult-transceiver networked gateway available as Mediola AIO Gateway or OEM product. It is the only gateway that supports my blinds (Elero) and it is widely available in my region (the Elero Centero home gateway is a rebranded Mediola gateway; there is an alternative for Elero blinds based on the Centero transmitter stick, but the Mediola gateway is cheaper).
Thanks for all your work on making this really simple and easy!
What i noticed is, when autodiscovery does not work and i manually entered all my elero blinds from a Gateway 6, that the addresses are now in hex, which means after 08 it goes on with 0A. This seems not to be supported yet as you parse them as int always.
For myself, i removed that part in the script and use directly the adr field and it works flawless.
Maybe this is worth a consideration in the future to also fully support gateway 6.