Install Driver Network Adapter Windows 10

0 views

Skip to first unread message

Carlito Roby

unread,

Aug 3, 2024, 6:03:07 PM8/3/24

to credisneto

Download and install Intel network connection driver: -Gigabit-Network-Connection-Driver-for-Intel-NUC-Kits-NUC6i-x-SY-and-NUC6i7KYK?product=89187 Download Intel Gigabit Network Connection Driver for Intel NUC Kits NUC6i[x]SY and NUC6i7KYK

1. Usually, the driver file is in .exe format. Extract and decompress the file to a folder. (To extract the file, you need an archive utility such as 7zip. If you don't have one, you can download it online.)

I bought the NUC6i7KYK from Amazon in end December and I encountered the same problem during the installation of Windows 10. When I attempted to install the LAN using device drivers of version 21.1 downloaded from Intel website, I got an warning "There is an issue with Microsoft Windows 10 that prevents the Intel Advanced Network Services feature from work correctly. You may install the feature, although you will be unable to create Intel ANS Teams and VLANs. Do you wish to install the feature?" When I clicked 'Yes' to proceed, I saw the "device not install". However, after I downgrade to version 20.x recommended in this thread, I can see the same warning message and successfully complete the installation of the LAN device driver as an interim solution.

I find out the problem. The problem is caused the Windows 10 licence used. The licence that I used for the initial installation was a licence before activation for evaluation purposes. This licence inhibited all Windows and device drivers update, Windows Store download, etc. After I have properly activated the Windows 10 licence, I am able to download all the Windows updates and successfully installed the latest device drivers included the Intel LAN drivers 21.1.

Message, it hangs for a while and then fails. I have no idea why a driver is being released with this problem, I assume it's on Microsoft's end based one what I've read. If I then try and install using Intel's tool I get:

Before trying the fix of installing the old driver, I read this thread and checked the activation status in System - and yes it was Activated. I didn't have an internet connection when I initially installed Windows or tried to install the drivers that came on the mobo disk but I did install a genuine copy of Windows and did connect it afterwards (I maybe wrong assuming an internet connection is needed for activation).

I have the exact same problem, I attempted to install -Network-Adapter-Driver-for-Windows-10 Intel Network Adapter Driver for Windows 10 version 21.1 (the latest version at this time), the install of the driver would hang for 5 minutes, and then fail. Due to this post, I installed -Network-Adapter-Driver-for-Windows-10 Intel Network Adapter Driver for Windows 10 version 20.7.1 and the driver and wired ethernet connection works fine. This is only a temporary solution, what happens when there is a network driver update we need to move to, but it doesn't work? This is unacceptable, please provide a fix for the latest driver.

Edit 01/03/17: See my recent /thread/109626 post for additional details including how I worked around the problem of not being able to install the current latest -Network-Adapter-Driver-for-Windows-10 Intel Network Adapter Driver for Windows 10 version 21.1.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

I reinstalled windows server couple of times and each time the drivers are not being picked up. My motherboard is ASRock Z97 Extreme 4. I tried installing the drivers from manufacturers website and it wont let me install the network adapter driver. When I try to install intel LAN driver v20. it says no intel adpater found. Please share your wisdom. This is driving me crazy.

What you will need to do is use a USB adapter to get you connected to the internet first as this tool will scan your system and then download any Intel drivers that are missing or need updating. USB network adapters can be bought cheaply if you do not have one already.

Hello. This is my firs post so I hope that I am not doing something wrong. I have a big problem that i cant solve by myself. I have tried everything searching forums and googeling without results that's helps me.

The Problem: I had Windows 8 and everything worked perfectly. But needed to get Windows 7 back again because programs did not work with a project in school. After installing Windows 7 Professionals back my network connection was completely dead. It will not work with wireless and not with the cable. When i troubleshoot I get the message "Install a driver for your network adapter". In Device Manager my Network adapter is completely gone and I have a ( ! ) on my Ethernet Controller, Network Controller, PCI Device, PCI Simple Communications Controller, SM Bus Controller, Universal Serial Bus (USB) Controller and Unknown device.

Windows 7 was installed on my computer when I first got it. Upgraded to 8 with no problem then like I said because school project did not work properly I needed to get back to 7. Now I am sitting on a computer that does not work at all.

Now all the drivers is installed. It is better but not perfect. One of the drivers was a network adapter so I can access internet now. But when I am using Internet explorer (standard) I get a popup window all the time saying:

I tried that but device manager doesn't show any network adapter. I bought a macbook air just last week and installed windows 10 (education) on it. I see only 'network controller' in device manager. On a related note, I did have problems installing Windows 10 on this macbook. After Bootcamp assistant created the windows install disk on a flash drive, the computer restarted but did not automatically go to the install disk to bbot up. I had to restart it again and hold the option key for it to do that. So I still do not get the bootcamp screen when I startup. Could my problem be related to that?

I have a similar problem, except I am using a 2008/2009 iMac (I know, ancient by now) and Windows 7. I have been using Windows 7 on this Mac with wifi for a couple years now without apparent problems, but last week my Mac wouldn't boot up (stuck in endless loading at grey screen) (Windows side did boot up and appeared fine). Long story short, the Mac drive was corrupted and I ended up having to erase my Mac HD, reinstall the OS (I stick with Snow Leopard 10.6.8 on that computer), and restore my files with a Time Machine back-up.

Now having done that the Mac side seems to be back to normal, but the Windows 7 now will not connect to the Wifi. I tried uninstalling broadcom as was suggested here and doing the hardware scan. Broadcom reappeared on the list but my wifi connection did not return. Any ideas?

I can see the wifi router but it won't connect and took some time to figure out why. My workaround this persistent connectivity issue is to unplug my external monitor before connecting to the wifi router. This indicates I may have a power supply or power management issue. This issue only occurs in Bootcamp, not macOS so it's more likely a power management issue than a power supply issue. Maybe the factory fitted dedicated NVidia GeForce 750M in the high-end late 2013 15" Macbook Pro uses a lot of power when piping to a 4K external monitor via displayport. Once I'm connected to wifi in Bootcamp I can plug the monitor back in and proceed without issues.

I am totally not sure about the true reason. But just to cope with this trouble, I believe it worth to try it. By the way, when I connect the external monitor, I use the USB-C port on right side (using USB-C > D-sub adapter).

If BC drivers are not installed yet, using Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support find the W8.1 64-bit drivers appropriate for your Mac year/model and test. W10 is not officially supported yet.

If you really want to play with it, install it in VirtualBox or VMWare Fusion or something. At least the networking functions will work that way. Setting custom screen resolutions is still difficult if not impossible as it doesn't work with the display drivers in most virtualization packages that provide custom scaling, etc.

Amazon EC2 provides enhanced networking capabilities through the Elastic Network Adapter(ENA). To use enhanced networking, you must use an AMI that includes the required ENA driver or manually install it. Then you can enable ENA support on your instance.

To review network specifications for your instance, choose the instance family link for your instance type. If you're not sure which instance family applies, see Naming conventions in the Amazon EC2 Instance Types guide.

If you have important data on the instance that you want to preserve, youshould back that data up now by creating an AMI from your instance. Updatingthe ENA kernel driver and enabling the enaSupportattribute might render incompatible instances or operating systemsunreachable. If you have a recent backup, your data will still be retainedif this happens.

Use AWS CloudShell from the AWS Management Console, or install and configure the AWS CLI or theAWS Tools for Windows PowerShell on any computer you choose,preferably your local desktop or laptop. For more information, see Access Amazon EC2 or the AWS CloudShell User Guide. Enhanced networkingcannot be managed from the Amazon EC2 console.

Use the following command to verify that the ena kernel driveris being used on a particular interface, substituting the interface name thatyou want to check. If you are using a single interface (default), it this iseth0. If the operating system supports predictable network names,this could be a name like ens5.