Robovac 2000

[Twyla Plack]

TheSmart Clean Robo Vac 2000 should not be used by children and persons with reduced physical, sensory or mental capabilities. Children should not play with the Smart Clean Robo Vac. Cleaning and user maintenance shall only be done by adults.

The Smart Clean Robo Vac must be used in accordance with the directions in this Instruction Manual. Tzumi Electronics cannot be held liable or responsible for any damages or injuries caused by improper use.

To reduce the risk of injury or damage, keep these safety precautions in mind when setting up, using and maintaining your Smart Clean Robo Vac:

The symbol on the product or its packaging indicates:

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.

Contact your local authority for information regarding the collection systems available.User CautionsThe Smart Clean Robo Vac is for indoor use only. Do not use the Smart Clean Robo Vac outdoor, commercial or industrial environments.Before using the Smart Clean Robo Vac, pick up objects like clothing, loose papers, pull cords for blinds or curtains, power cords and any fragile objects.The Smart Clean Robo Vac is not a toy. Do not sit or stand on the Smart Clean Robo Vac. Small children and pets should be supervised when the Smart Clean Robo Vac is operating.Store and operate the Smart Clean Robo Vac in room temperature environments only.Do not use the Smart Clean Robo Vac to pick up anything that is burning or smoking.Do not use the Smart Clean Robo Vac to pick up spills, bleach, paint, chemicals or anything wet.If the room to be cleaned contains a balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation.Do not place anything on top of the Smart Clean Robo Vac.Be aware that the Smart Clean Robo Vac moves on its own. Be careful when walking in the area that the Smart Clean Robo Vac is operating in to avoid stepping on it.Do not operate the Smart Clean Robo Vac in areas with exposed electrical outlets in the floor.Battery Care & ChargingCharge using a standard outlet only. This product may not be used with any type of power converter. The use of a power converter will immediately void the warranty.Do not use a Charging Dock with a damaged cord or plug. If the cord or plug is damaged, it must be serviced by the manufacturer or a qualified service provider.Charge indoors only.The Charging Dock may be protected with a surge protector in the event of severe electrical storms.Never handle or touch the Charging Dock or cables with wet hands.Always remove the Smart Clean Robo Vac from the Charging Dock before cleaning or maintaining it.The Smart Clean Robo Vac contains Li-on rechargeable batteries, be sure to never open, pierce or damage the batteries.Do not wet the battery compartment.If the batteries are leaking, stop the Smart Clean Robo Vac use immediately and contact customer service.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inference received, including interference that may cause undesired operation.Product and ContentsSmart Clean Robo Vac

If the room to be deaned contains a balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation.Using the Smart Clean Robo VacPlug in the Charging Dock and place the remaining wire inside the bottom of the Charging Dock.

Note: Failure to place the remaining wire inside the Charging Dock, may cause the Smart Clean Robo Vac to pull on the wire while charging or cleaning.

Place the Charging Dock on a hard level surface and against a wall.

Charging Dock Position

Place the Charging Dock against the wall and make sure it is in an open and uncluttered area leaving at least: 6 Feet in the front of the Charging Dock.3 Feet on both sides of Charging Dock.

Install Side Brushes

Attach the Side Brushes to the bottom of the Smart Clean Robo Vac by pressing a brush into each slot until it clicks.

Turning On the Smart Clean Robo VacSwitch the power button at the bottom of the unit to the ON position.Place the Smart Clean Robo Vac on the Charging Dock, making sure the metal charging contacts on the Charging Dock match up with those underneath the Smart Clean Robo Vac.The Smart Clean Robo Vac will emit a series of tones. Once the power button illuminates the Smart Clean Robo Vac is ready for use.

Start a Cleaning CyclePress the power button once to wake up the Smart Clean RoboVac.Press the power button again to start a cleaning cycle (or button on Remote Control).If the battery gets low before finishing the cleaning cycle, the Smart Clean Robo Vac will return to the Charging Dock to recharge.

If the Charging Dock is inaccessible, the Smart Clean Robo Vac will not be able to recharge, please place the Smart Clean Robo Vac manually on the Charging Dock to recharge.

Note: Please refer to section 3.3 for more Cleaning Modes.

Pause Cleaning CycleTo pause the Smart Clean Robo Vac during a cleaning cycle, press the button on Smart Clean Robo Vac or press the buttom on the Remote Control.To resume the cleaning cycle, press button again.To send Smart Clean Robo Vac back to the Charging Dock, press button on the Remote Control.

Power OFF

To end the cleaning cycle and put Smart Clean Robo Vac in standby mode, press and hold button until the Smart Clean Robo Vac indicators turn off.

Cleaning ModesThe default cleaning suction power is set to 1000 Pa, in case you need more power for a spot, press the Suction Power button on the remote to increase the suction power to 2000 Pa.

Use a dean, dry microfiber or soft cotton cloth to wipe any debris that has accumulated in the round sensor opening on the right side of the bottom surface. Do not spray cleaning solution directly into the sensor opening.

Cleaning the Smart Clean Robo Vac Main BrushPul on the release tabs to unlock the Brush guard as shown.

Lift the Main Brush to remove.

Clean the Main Brush with the provided cleaning tool or a vacuum cleaner.

Reinstall the Main Brush by inserting the fixed protruding end first and then clicking into place.

Press down to snap the Main Brush cover into place.

TroubleshootingThe Smart Clean Robo Vac will tell you if something is wrong with a two-tone distress sound followed by a message. The indicator will also blink or be sold red.

Please refer to the chart below to troubleshoot and resolve the Smart Clean Robo Vac problem. If the problem is not resolved, please contact our customer service department for further assistance.Rebooting Instructions

For some errors, rebooting the Smart Clean Robo Vac may resolve the problem. To reboot the Smart Clean Robo Vac, switch the power button at the bottom of the unit OFF wait 10 seconds and switch it back ON.

Indicator Solid Red

How long does it take to fully charge and then how long will it operate until it needs to be recharged?Knows when to energize, consequently docks and re-energizes its Li-particle battery for as long as 100 minutes between charges

Who uses robot vacuums?This coincides with a younger demographic that tends to align with new technology, as 46% of robot vacuum owners are in the 18-34 age bracket. As cleaning performance improves and more tech features are added, Interpret expects the robot vacuum sector to continue to grow at a moderate pace.Can robot vacuum clean sofa?A suite of intelligent sensors guides the Roomba robot vacuum throughout your home, along walls, around furniture, and under sofas and beds to help thoroughly clean your floors

Do robot vacuums clean corners?A smart robot vacuum can be used to spot and clean specific areas of your home, like entrances, dead corners underneath the sofa and bed, or even dining tables.Can children use the Smart Clean RoboVac 2000?No, the Smart Clean RoboVac 2000 should not be used by children or persons with reduced physical, sensory, or mental capabilities. Children should not play with the Smart Clean RoboVac.

Can the Smart Clean RoboVac 2000 be used outdoors?No, the Smart Clean RoboVac 2000 is for indoor use only. It should not be used outdoor, commercial or industrial environments.Can the Smart Clean RoboVac 2000 pick up wet spills?

Can I use a power converter with the Smart Clean RoboVac 2000?No, the Smart Clean RoboVac 2000 may not be used with any type of power converter. The use of a power converter will immediately void the warranty.How do I start a cleaning cycle with the Smart Clean RoboVac 2000?

Can I pause a cleaning cycle with the Smart Clean RoboVac 2000?Yes, to pause the Smart Clean RoboVac during a cleaning cycle, press the button on Smart Clean RoboVac or press the button on the Remote Control. To resume the cleaning cycle, press button again.

Can I control the Smart Clean RoboVac 2000 using an app?A: Yes, you can control the Smart Clean RoboVac 2000 via the Tzumi Smart Home app. Before you start, make sure that your smartphone or tablet is connected to a WiFi network and running IOS 8.0 (or newer) or Android 4.4 (or newer). The 2.4 GHz band wireless signal should be enabled on your wireless router.Unboxing And Set Up -VIDEO -content/uploads/2022/02/1280x720-ionVac-Smart-Clean-WiFi-Connect-How-To-Video-on-Vimeo.mp4 Tzumi Ionvac Smartclean RoboVac 2000 User Manual

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

3a8082e126