Fagor Touch Plus Control Manual

[Raina Giorno]

TheAJAX Superturn Range now heavier and stronger with the Fanuc 0i TF Plus Turn Mate i control. These machines can be used as a manual lathe by using the electronic hand-wheels, the control is used as a simple DRO measuring system.

For one-offs and small batch production the Super Turn can be programmed, using the flexible electronic turning cycles, its quick, its convenient and you do not have to be CNC trained to use the electronic cycles.

You can produce tapers, radii, grooving, multi point profiles and screwcutting by answering simple questions direct from the Fanuc screen. These electronic cycles can then be linked together to give a complete electronic programme.

For complicated shapes and batch production, full ISO programming on the Fanuc 0i Turn Mate control is possible. Other control options include the Fagor 8058 Elite Conversational control and the Siemens 828D with Shopturn.

The AJAX Superturn machines include fully enclosed guarding, meeting CE regulations, automatic 4 way indexing toolpost, Fanuc touch screen control. Machine programs can be up and downloaded through the RS232 port or saved directly to the PMCIA card. CE & CA Marked.

The AJAX Superturn machines can be used as a manual lathe by using the electronic hand-wheels and axis joy stick, the control is used as a simple DRO measuring system. For the 1 offs and small batch production the Super Turn can be programmed, using the flexible electronic turning cycles, its quick, its convenient and you do not have to be CNC trained to use the electronic cycles.

You can produce tapers, radii, grooving, multi point profiles and screwcutting by answering simple questions direct from the Fanuc screen. These electronic cycles can then be linked together to give a complete electronic programme.

For complicated shapes and batch production, full ISO programming on the Fanuc 0i control is possible.

The AJAX Superturn machines include fully enclosed guarding, meeting CE regulations, automatic 4 way indexing toolpost, automatic speed range change and new Fanuc touch screen control and monitor on sliding pendant.

Machine programmes can be up and downloaded through the RS232 port or saved directly to the PMCIA card.

The range starts at 200 mm centre height to 300 mm centre height, with bed lengths varying from 750 mm to 2,000 mm, spindle speeds vary for sizes of machines but all have CSS fitted as standard. Axis and spindle drives are all Fanuc to give reliability and longevity of service.

The new range of ADVANCE PLUS gas ovens has a built-in operating control system with a touch control screen, and has 4 cooking modes: steam, controlled steam, regeneration and convection (up to 300 C). As well as operating in manual mode, the user may select the Fagor Cooking mode (Fagor-recommended or own recipes), or the Fagor Easy mode designed for those seeking an easy life. The required voltage for the Advance plus gas ovens is 230V 1+N-50 Hz- optional, 60 Hz.

3a8082e126