Remocon Rmc 600

[Eloisa Stawasz]

DEPRECATEDA Python script to gets the data from the gas boiler system via the Elco Remocon-Net cloud service and push them to a MQTT broker. - GitHub - nechry/remocon2mqtt: DEPRECATED A Python scr...

An AppDaemon to fetch data from the gas boiler system via the Elco Remocon-Net cloud service and push them to home-assistant entities. - GitHub - nechry/elco-remocon-net-appdaemon: An AppDaemon to ...

Thank you fro your reply.

As I have made a backup before updating to 10.5 I. I made a restore which was then apparently 10.3 as it shows the possibility of update to 10.5.

If I go back in to the database I find out that the connection to Elco stopped after we had an intended power off because of the installation of the PV modules. After power on there was apparently no Elco anymore. So, I do not believe that it has to with the version.

Where do I find the logs of appdemon? Is it possible to delete appdemon/Elco and to reinstall? (after having made a backup)

Thank you Bernd

hello @matfroh I did some research on Ariston and discovered this integration: Ariston NET remotethermo Integration for Home Assistant

I tested with my remocon.net credentials and it works pretty well. In addition we also have set point controls and other control functionalities.

I have made a claim to Elco because they offered a heat meter but I cannot read the heat meter values for my heat pump aerotop sx

In the app remocon I found a variable flow-temp (about 33 C), but I did not find on the website. Is ist possible to read the variable flow-temp by adding it somehow to the python script?

As it seems this script will not appear anymore I tried other ways and installed the Multiscrape custom component - GitHub - danieldotnl/ha-multiscrape: Home Assistant custom component for scraping multiple values (fro.

Ok, I found a solution which is at least working for me. It uses Multiscrape (GitHub - danieldotnl/ha-multiscrape: Home Assistant custom component for scraping multiple values (from a single HTTP request) with a separate sensor for each value. Support for (login) form-submit functionality.) and a Rest sensor in combination to get some values from the web user interface from Remocon.

First thing you should do is login with your account details on the Remocon website via a browser. You should then see a URL like this: LOGIN - Remocon NET. Please write down the ID at the end of the URL and replace it with YOURSPECIFCID in the code snippets below (2 occurrences).

I have one question, how do I know which json keys are available? Besides the outside temperature, heathpump status, storage temperaure and comfort temperature, how can I see which other elements are in the struct?

My Elco heat pump using remocon, I found its actualy a Ariston product, and work with there site also(same user name and password) so I tested this intergration, GitHub - chomupashchuk/ariston-remotethermo-home-assistant-v2: Ariston NET remotethermo integration for Home Assistant based on API

Works prefect with my elco heatpump

3a8082e126