Zebex Z-6170 Driver Download
Laverne Levenstein
Zebex Z-6170 Driver Download - How to Install and Use the Zebex Z-6170 Scanner
The Zebex Z-6170 is a single-laser omnidirectional hands-free scanner that combines elegance and functionality. It is ideal for spaces such as bookstores, boutiques, and environments where refinement is essential. It can scan the most prevalent 1D barcodes with unparalleled performance and speed. In this article, we will show you how to download and install the driver software for the Zebex Z-6170 scanner, and how to use it with your computer.
How to Download the Zebex Z-6170 Driver Software
To download the driver software for the Zebex Z-6170 scanner, you need to visit the official website of Zebex, which is a leading 2D barcode scanners solution provider. On the website, you can find the product page for the Zebex Z-6170 scanner, where you can see its features, specifications, and downloads. To access the downloads section, scroll down to the bottom of the page and click on the "Download" tab. You will see a list of files available for download, such as data sheet, user manual, service guide, and firmware. Look for the file named "EzSet 1D Utility program". This is the driver software for the Zebex Z-6170 scanner. Click on the "Download" button next to the file name to start downloading it to your computer.
How to Install the Zebex Z-6170 Driver Software
After downloading the driver software for the Zebex Z-6170 scanner, you need to install it on your computer. To do so, follow these steps:
- Locate the downloaded file on your computer. It should be a zip file named "EzSet_1D.zip".
- Extract the zip file to a folder of your choice.
- Open the extracted folder and double-click on the file named "Setup.exe". This will launch the installation wizard.
- Follow the instructions on the screen to complete the installation process. You may need to accept some terms and conditions, choose a destination folder, and select some options.
- When the installation is finished, click on "Finish" to exit the wizard.
- Restart your computer if prompted.
Congratulations! You have successfully installed the driver software for the Zebex Z-6170 scanner on your computer.
How to Use the Zebex Z-6170 Scanner
To use the Zebex Z-6170 scanner with your computer, you need to connect it via a USB cable or a RS-232 cable. The USB cable is for firmware update only, while the RS-232 cable is for setting up and testing the scanner. You also need to use the EzSet 1D utility program that you installed earlier to configure and test the scanner. To do so, follow these steps:
- Connect the scanner to your computer via a USB cable or a RS-232 cable.
- Open the EzSet 1D utility program from your start menu or desktop shortcut.
- Select your scanner model from the drop-down menu at the top left corner of the program window.
- Select your communication port from the drop-down menu at the top right corner of the program window.
- Click on "Connect" to establish a connection between your computer and your scanner.
- You can now use the tabs on the left side of the program window to configure and test various settings of your scanner, such as barcode type, scan mode, beep tone, trigger button, etc.
- You can also use the "Scan" tab to scan barcodes and see their decoded data on your computer screen.
- When you are done with configuring and testing your scanner, click on "Disconnect" to end the connection between your computer and your scanner.
- Close the EzSet 1D utility program.
Congratulations! You have successfully used the Zebex Z-6170 scanner with your computer.
We hope this article has helped you to download, install, and use the Zebex Z-6170 scanner. If you have any questions or problems, please refer to the user manual or the service guide that you downloaded from the Zebex website, or contact the Zebex customer support for assistance.
3b01f9094b