Free Lathe Manuals

[Courtland Boland]

MKL50KAESER Roll GrinderModel LCL. Basic Operation & Maintenance Manual.

MK80 KARGER Lathes DZ20, DZ32 and DZ42, DL2 and DL3,. Instruction andMaintenance Manual with some useful sectional drawings. English and GermanText.

MK100 KAINDL Drill Grinding Jig BSG60. Operator's Instruction and MaintenanceManual.

MK115 KALTENBACH KKS, SKL and RK Circular Saws. Operating and MaintenanceManual

MK115A KALTENBACH HDM Cold Saw. Instructions, Starting up, Operator'sInstruction and Maintenance Manual

MK117 KAMPH FK-1 Die Sinker. Operation & Maintenance Manual

Kand UX - see under Matrix

MK118

KART ROYAL E2n-MH - by TECHNOIMPEX. Operator's Instruction Manual and PartsManual as Sectional Drawings. Includes reproductions of the screwcutting andspindle-speed charts and electrical diagrams.

MK119 KASHIFUJI KS-14 GearHobbing Machine. Detailed Operating and Maintenance Instructions with hydraulicSchematic, Foundation Plans, Lubrication Diagrams, details of the elecricalsystem with three Electrical Schematics, electro-magnetic clutch, generaladjustments, adjustment adjustment of spindle bearings,hob saddle gibs,verticalfeed screw and backlash in index worm wheel. Clear instructions for setting thechangewheels, gears for vertical and horizontal feeds and charts fordifferential changewheels for Module and D.P. etc.

MK119A KASHIFUJI KS-14 Gear Hobbing Machine. Parts Manual as "SectionalExploded Component Drawings".

MK120 KASTO EBS 250-U, 320-U and 450-U Mechanical Saws. Instruction Manual withParts Manual as Detailed Sectional Drawings.

MK120A KASTO PSB 280-U Saw. Instruction Manual with Parts Manual as DetailedSectional Drawings.

MK120B KASTO BSM 190/240 Saw. Instruction Manual with Parts Manual as DetailedSectional Drawings and Electrical Schematic. English and German text. Includesa copy of the detailed Technical Specification & Sales Catalogue.

MK120C KASTO EBS 320-AU Saw. Instruction Manual with Parts Manual as DetailedSectional Drawings and Electrical Schematic. Only published with GERMAN TEXT.

MK120D KASTO EBS 320-U & EBS 450-U Saw. Instruction Manual with PartsManual as Detailed Sectional Drawings and Electrical Schematic. English Text

MK130 KC Wood Turning Lathe. Operator's Instruction Manual with Parts Manual asExploded Component Diagrams.

KEARNEY and TRECKER MILWAUKEE - for some models also see the 'CVA' entry.

MK170 Kearney and Trecker: Kearney and Trecker Model 2D Milling Machines(Rotary Head type): Instruction and Maintenance Manual - later full editionwith Appendix for power drive to the knee and revised lubrication instructions..00

MK170A Kearney and Trecker: Kearney and Trecker Model 2D Milling Machines(rotary head type): Parts Manual as Sectional Drawings. .00

MK170B Kearney and Trecker: Kearney and Trecker Tri-D Milling Head. Operator'sInstruction and Maintenance Manual with Parts as Exploded Component Diagrams..00

MK170E Kearney and Trecker: Kearney and Trecker (CVA) 2CE and 2E MillingMachines: Instruction Manual and Maintenance Manual. .00

MK170F Kearney and Trecker: Kearney and Trecker (CVA) 2CE Milling Machines:Parts Manual with complete high-quality Sectional Drawings of the wholemachine. .00

MK170G Kearney and Trecker: Kearney and Trecker (CVA) 2E Milling Machines:Single-model Instruction Manual and Maintenance Manual. .00

MK170H Kearney and Trecker: Kearney and Trecker (CVA) 2E Milling Machines:Parts Book as Exploded Component Diagrams. .00

MK170J Kearney and Trecker: (CVA) Dats Pack for the 2E, 2CE, 2CES and 3CEMilling Machines: Instruction Manual and (basic) Maintenance. Includes an ElectricalSchematic. .00

MK170K Kearney and Trecker: Kearney and Trecker (CVA) 3CE and 2CES MillingMachines: Parts Manual as high-quality Sectional Drawings. .00

MK170L Kearney and Trecker: Kearney and Trecker Model H Milling Machine PlainHorizontal, Universal, Vertical: Operator's Instruction Manual. .00

MK170M Kearney and Trecker: Kearney and Trecker Model H Milling Machine PlainHorizontal, Universal, Vertical: Replacement Parts Manual with ExplodedComponent Diagrams. .00

MK170N Kearney and Trecker: Kearney and Trecker Model H Milling Machine PlainHorizontal and Universal: Replacement - Alternative Parts Manual shown asSectional Drawings. .00

MK170P Kearney and Trecker: Kearney and Trecker 2H Milling Machine PlainHorizontal, Universal, Vertical and Automatic Cycle: Operator's InstructionManual. .00

MK170Q Kearney and Trecker: Kearney and Trecker Model 1H and 2H MillingMachines Plain Horizontal, Universal, Vertical and Automatic Cycle: ReplacementParts Manual with Exploded Component and Sectional Diagrams. Two publicationsare included, one early, one late. .00

MK170R Kearney and Trecker: Kearney and Trecker Model K Milling Machines PlainHorizontal, Universal, Vertical. Replacement Parts Manual with ExplodedComponent and Sectional Diagrams. .00

MK170S Kearney and Trecker: Kearney and Trecker 2K and 3K Milling MachinesPlain, Universal and Vertical: Instruction Manual. .00

MK170T Kearney and Trecker: Kearney and Trecker 2K and 3K Milling MachinesPlain, Universal and Vertical: Parts Manual as Sectional Drawings. .00

MK170U Kearney and Trecker: Kearney and Trecker (Milwaukee) Milling Machines:Illustrated Parts Manual for Attachments: with detailed Sectional Drawings ofthe units used on Models: 1H, 2HL, 2H, 2E, 1CH, 2CH, 2K, 2KM, 2CSM, 3H, 3K,3KM, 3CSM, 4CSM, 5CSM, 6CSM, 4H, 4K, 5H, 5HM, 2CK, 3CH, 3CK, 4CH, 4CK, 5CK and6CK. .00

MK170V Kearney and Trecker: KEARNEY and TRECKER S-Type (S-12 & S-15)Milling Machines Operator's Instruction Manual. These millers were made invarious forms: Plain Horizontal, Universal, Vertical and Ram Types, with anumber of different table sizes (S-12, S-15, etc.) and with differing ModelDesignations (205, 307, etc.) depending upon the year of manufacture.Operator's Instruction Manual. .00

MK170W Kearney and Trecker: KEARNEY and TRECKER S-12 and S-15 Milling MachinesMaintenance Manual with Dismantling Instruction Guides as written instructionswith diagrams and exploded-component drawings. Includes Hydraulic, Lubricationand electrical Schematics. These millers were made in various forms; PlainHorizontal, Universal, Vertical and Ram Types, with a number of different tablesizes (S-12, S-15, etc.) and with differing Model Designations depending uponthe year of manufacture. Maintenance Manual with Dismantling Instruction Guidesas Exploded Component Drawings. Includes 2 electrical wiring diagrams, 12hydraulic circuit diagrams with expected pump (and other) pressures listedtogether with the spindle, column and lubrication pressure adjustmentsexplained,. Includes a lubrication schematic. .00

MK170W-C12 Kearney and Trecker (Milwaukee) C12 Model 203 Milling Machine. Operation and Maintenance Manual with Electrical Schematic.

MK170X Kearney and Trecker: KEARNEY and TRECKER S-12 Milling Machine. PartsManual as Exploded Component Drawings .00

MK170X2 Kearney and Trecker: KEARNEY and TRECKER S-15 Milling Machine. PartsManual as Exploded Component Drawings .00

MK170Z Kearney and Trecker: KEARNEY and TRECKER 205 S-12 & 307 S-12 MillingMachines. Parts Manual as Exploded Component Drawings. These millers were madein various forms; Plain Horizontal, Universal, Vertical and Ram Types, with anumber of different table sizes and with differing Model Designations dependingupon the year of manufacture. .00

MK170ZP Kearney and Trecker: MK170ZP KEARNEY and TRECKER 205 S-12 & 307S-12 Milling Machines. Operator's Instruction Manual. .00

MK172 Kearney and Trecker: Kearney and Trecker TF Series. All-modelsInstallation Manual and Lubrication. .00

MK172A Kearney and Trecker: Kearney and Trecker 210-220, 310-320, 315-330,415-430 TF Series Milling Machines: Plain, Universal and Vertical. Operator'sInstruction Manual. .00

MK172B Kearney and Trecker: Kearney and Trecker 315-330 and 415-430 "T andF" Series Milling Machines: Plain, Horizontal and Vertical. Operator'sInstruction Manual. .00

MK172C Kearney and Trecker: Kearney and Trecker 315-330 and 415-430 TF SeriesMilling Machines: Plain, Universal and Vertical. Parts Manual as ExplodedComponent drawings. .00

MK172D Kearney and Trecker: Kearney and Trecker 215 TF-16, 220 TF-16, 315 TF-16and 320 TF-16 "T and F" Series Milling Machines: Plain, Horizontaland Vertical. Parts Manual as Exploded Component Drawings. .00

MK172E Kearney and Trecker: Kearney and Trecker Milwaukee-Mil 1200-1800 SeriesSimplex and Duplex "Milwaukee Milling Machines". Operator'sInstruction Manual. .00

MK172F Kearney and Trecker: Kearney and Trecker Milwaukee-Mill 1200-1800 SeriesSimplex and Duplex "Milwaukee Milling Machines". Operator'sInstruction Manual. .00

MK172G Kearney and Trecker: Kearney and Trecker Milwaukee-Mil 1200 Series BedType Production Milling Machine. Parts Manual as Sectional Drawings. .00

MK172H Kearney and Trecker: Kearney and Trecker MWC-65 Operator's InstructionManual. .00

MK172J Kearney and Trecker: Kearney and Trecker Milwaukee-matic Series EaMilling Machine. Machine Maintenance Manual with Parts as Exploded ComponentDrawings. .00

MK172K Kearney and Trecker: Kearney and Trecker KT-gemini-D Control SystemOperating Manual (Publication 883C). .00

MK172L Kearney and Trecker: Kearney and Trecker KT-modular-D ControlMaintenance Manual (Publication 894C). .00

MK172M Kearney and Trecker: Kearney and Trecker Table of Leads for Model 2EUniversal Milling Machines with metric leadscrews. .00

MK172N Kearney and Trecker: Kearney and Trecker Table of Leads for 8-inch and10-inch Model H dividing Head. .00

MK172P Kearney and Trecker: Lubrication Manual for "Milwaukee"Milling Machines. A complete guide covering the Horizontal, Vertical andUniversal Models of the Types: 1H, 2HL, 2H, 3H, 4H, 5H, 2K-2KM, 3K-3KM, 4K,1200 Simplex, 1200 Duplex, 1800 Simplex, 1800 Duplex, 1400 Simplex and Duples,2200 Simplex and duplex, Bridge Type vertical, Model D Tool & Die MillingMachine, Rotary Head Feed Box, Table Feed Gearbox.

MK172Q Kearney and Trecker Series 1000 and 2000 Bed-type Production MillingMachines. Detailed 42-page Sales & Technical Specification Catalogue withannotated control diagrams and clear explanations of how the machines function.

MK172R Kearney and Trecker Dial-a-Cycle 1400 & 1800 Series Milling Machines. Detailed Operator's Manual.

KEARNS BORERS: Besides the Kearns manuals below - others may be available.Phone: 01298-0871633 or email:to...@lathes.co.ukto enquire

MK318EX Using the Kearns Horizontal Borer. A Theoretical & Practical Exercisefor Engineering Students & Apprentices - "Making the Geneva WheelMechanism", A short, 5-section booklet explaining how a borer is used tomachine the castings, the driven & driving wheels, etc. A step-by-stepguide to a typical job.

MK318 KEARNS No.0 (OA, OB, Oc Models) Horizontal Boring and Facing Machine(including Optimetric Measurement System Types). Operator's Instruction andMaintenance Manual with Sectional Drawings and Electrical Schematic. Includes aseparate smaller manual issued with the early machines and a copy of thecomprehensive and useful technical Sales and Specification catalogue.

MK318A KEARNS No. 1 Horizontal Boring and Facing Machines. Operator's Handbook. Levelling, Lubricating, Shear Pins and Operating. Includes a copy of thecomprehensive and useful technical Sales and Specification catalogue.

MK318B KEARNS No. 2 and No. 3 Boring and Facing Machines. Operator'sInstruction, Installation and Lubrication Manual. Includes a copy of thecomprehensive and useful technical Sales and Specification catalogue.

MK318D KEARNS "S Type" Horizontal Borer: Operating and MaintenanceManual (including Optimetric Measurement System). Includes details for both the"Spindle" and "Facing Chuck" Models, an electrical schematicand a copy of the maker's detailed 65-page Sales and Specification Cataloguegiving, with superb photographs, much additional information about accessoriesand attachments for Kearns borers. This set of publications represents acomplete data pack for the Kearns S Type.

MK318P Kearns-Richards (also found badged Staveley) "Electrabore"Boring and Facing machine. Kearns-Richards (also found badged Staveley)"Electrabore" Boring and Facing machine. Two manuals in one coveringboth early and late machines ("round" and "angular"styling) and all sizes (A, B, C and D) and Versions: T, S, W, O, e.g. somebeing marked AT, BT, CT, ATX, ATY, ATZ, BTX, BTY, BTZ, CTZ, CTY, CTZ, AS, BS,CS, TA30, TB40, TC50, TC60, WA30/72, WB40/84, WB40/102, WC50/144, WC60/144,WC50/168, YA35, YB50, YC60, XA35, XB50, XC60, etc. Operator's Instruction andbasic Maintenance Manual together with a detailed Sales & TechnicalSpecification catalogue.

MK318G KEARNS-RICHARDS KR Horizontal Boring and Milling Machine. Instruction Manualand Parts Manual as useful Sectional and Exploded-component Drawings.

MK318H KEARNS-RICHARDS PR Series Horizontal Boring and Facing Machine Manual ofInstruction. This was issued together with, and intended to be used alongside,a very detailed 63-page Technical Sales and Specification, Accessories andTooling Catalog (also largely covers the PRT - the PR with a threadingfacility).

MK318J KEARNS-RICHARDS PR Series Horizontal Boring and Facing Machine"Tools and Equipment Catalogue"

MK318K KEARNS-RICHARDS SH75 Horizontal Boring and Milling Machine. InstructionManual and Parts as useful Sectional and Exploded-component Drawings.

MK318L KEARNS-RICHARDS SH125 Horizontal Boring and Milling Machine. InstructionManual with program print outs, Maintenance notes, etc.

MK318LSF KEARNS-RICHARDS SF125 Horizontal Boring and Milling Machine. Operator'sInstructions with program print outs, Maintenance notes, etc.

MK318LSE KEARNS-RICHARDS SE125 and SE150 Horizontal Boring and Milling Machine.Operating & Maintenance Manual.

MK318M KEARNS-RICHARDS TK40, TK40B, SB, SK and TK Horizontal Boring and MillingMachines (Sometimes marked Staveley). Detailed Instruction and MaintenanceManual and Parts as Sectional and Exploded-component Drawings.

MK318N/MR79C Kearns-Richards BTX40 Horizontal Borer. Operator's Instruction andMaintenance Manual with Parts Manual as Sectional Drawings.

MK318P Kearns-Richards B/K and WB Horizontal Borers. Operation &Maintenance Manual. (not a very good copy)

MK318Q Kearns-Richards Type 450 Horizontal Borers. Operation & MaintenanceManual. Includes a set of machine arrangement (sectional) drawings

MK318R Kearns-Richards SJ100 (SJ-100) Horizontal Boring and milling machine.Operation, Maintenance with a Parts Manual as Sectional Drawings..

MK318S Kearns-Richards 451P and 721P Horizontal Borers Operating and Maintenance Manual with an electrical Schematic and removal instructions for Traverse Selection, Drive and Feed gearboxes and the front spindle slide.

MK325 KEETONA-BATH Press Brakes. Parts List as Exploded Component Diagrams.

MK325A KEETONA CADET Guillotine. Operating and Maintenance Instructions withExploded Component Parts Drawings.

MK325B KEETONA Cramp Folding Machines Operating and Maintenance Instructionswith Exploded Component Parts Drawings.

MK325C KEETONA Initial Pinch Bending Rolls. Operating and MaintenanceInstructions with Exploded Component Parts Drawings.

MK325D KEETONA Pyramid Bending Rolls. Operating and Maintenance Instructions.

MK325E KEETONA HydroForm Universal Folding Machine. Instruction Manual andParts as Exploded component Drawings. Includes Electrical and HydraulicDiagrams.

MK325E/4 KEETONA HydroForm Mk. 4 Universal Folding Machine. Instruction Manualand Parts as Exploded component Drawings. Includes details of the Multiformprocess and the SC100 Microprocessor Control with Operating Instructions and anElectrical Diagram.

MK325F KEETONA K3 Folder. Instruction Manual and Parts as Exploded ComponentDrawings.

MK325G Keetona SHEARMASTER and SHEARMATIC Manuals: Shearmaster Service Manualwith Parts Appendix and Electrical Schematic together with the Keetona Shearmatic10-foot by 10g High-Speed Shear with Operating and Maintenance Instructions anddetails of the essential slideway, brake, clutch, hold-down and blade changingand adjustment settings, etc. These two publications appear to cover themajority of Shearmaster and Shearmatic models.

MK325H KEETONA HYDRO-CUT Squaring Shears. Operator's Instruction andMaintenance Manual with Electrical Schematic.

KEIGHLEY machine Tools - see under NEWALL-KEIGHLEY

MK330 KEMPSMITH Model G Milling Machines. Operation Manual with Parts manual asSectional Drawings.

MK335 KENDALL and GENT CVM 25 Vertical Milling Machine. Operating andMaintenance Manual with Sectional Drawings, an Electrical Schematic and a copyof the maker's Sales and Specification catalogue.

MK335A KENDALL and GENT CVM40 and CVM60 Vertical Milling Machines. Operatingand Maintenance Manual with Sectional Drawings and wiring diagrams. Includes acopy of the maker's Sales and Specification Catalogue.

MK335B KENDALL and GENT "KENCO" Screwing Machines. Operating Manual.Includes a copy of the maker's Sales and Specification catalogue.

MK340 KENT-OWENS 2-20 Hydraulic Milling Machine. Operator's Instruction andMaintenance Manual.

KERRY LATHES, DRILLS and other machines were often badged "Q and S"or "Qualters and Smith". The model designations were identical. Seethe Qualters and Smith section below. Some Harrison L5 lathes also appearedwith the Kerry badge and if you are uncertain which Kerry model you have lookfirst in the Kerry section of theArchive and then in the Harrison.

MK450 KERRY Mk.1, Mk.2 and Mk.3 (Type "AG" ) Lathe: A complete datapack with all know publications included: the Instruction and MaintenanceManual and two separate Parts Manuals - one for the screwed-nose spindle theother for the L00 fittings (these are in the form of useful sectional drawingsthat have been enlarged for clarity) and copies of both early and late Sales,Technical Specification and Accessories Catalogues.

MK450A KERRY LATHES 1124/1140 and 1324/1340 (with square styling).Instructionand Maintenance Manual and Illustrated Parts with Cross-Sectional Drawings.Includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450B KERRY (Q and S) DRILL "Super 8" "Backgeared Type":Instruction Manual and Separate Parts Manual as Sectional Drawings; includescopies of early and late maker's comprehensive Technical Sales and SpecificationCatalogues. Covers all models: early "round" style A, B and S and thelater more "angular" Series "U". A complete data pack forthe machine.

MK450C KERRY (Q and S) DRILL "Drillmaster" Instruction Manual andParts Manual as Sectional Drawings; includes a copy of two early and latemaker's Technical Sales and Specification Catalogues.

MK450D KERRY (Q and S) DRILL Model "100" (P Series) Geared-head, No.3 Morse taper: Instruction Manual and Parts Manual as Sectional Drawings;includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450E KERRY (Q and S) DRILL Model "125" (P Series) Geared-head No. 3Morse taper: Instruction Manual and Parts Manual as Sectional Drawings;includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450F KERRY (Q and S) DRILL Model "150" (P Series) Geared-head, No.4 Morse taper: Instruction Manual and Parts Manual as Sectional Drawings;includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450G KERRY (Q and S) DRILL Model "150" (H Series) Geared-head, No.4 Morse taper: Instruction Manual and Parts Manual as Sectional Drawings.

MK450H KERRY (Q and S) DRILL Model "150 AG" Geared-head: InstructionManual and Parts Manual as Sectional Drawings.

MK450J KERRY (Q and S) DRILLS RADIAL-ARM R3 and R4: Instruction Manual andParts Manual as Sectional Drawings; includes an electrical diagram and a copyof the maker's Technical Sales and Specification Catalogue.

MK450K KERRY E3 and E4 Radial Arm Drills (also sold as Qualters and SmithQSR-3, QSR-4, QSR-3E and QSR-4E) All types, both rise-and-fall arm andrise-and-fall table. Instruction Manuals and Parts Manuals as SectionalDrawings with Electrical Schematics. This is a 4-edition publication coveringall versions from first to last and includes a set of Sales & SpecificationCatalogues.

MK450L KERRY DRILLS RADIAL-ARM Type R.10: Instruction and Maintenance Manualand Parts Manual as Sectional Drawings; includes a copy of the maker'sTechnical Sales and Specification Catalogue.

MK450M KERRY DRILLS (Qualters and Smith) Drillmaster QDM 500, 625 and 750:Instruction Manual and Parts Manual as Sectional Drawings.

MK455 KERRY ULTRASONICS - Plastiscon Mk. 3 KS 3007, KS 6007 and KS 1207 PlasticWelders: Installation, Operator's Instruction and Maintenance Manual. Includes3 blue prints.

MK455A KERRY ULTRASONICS CD-50 Portable Stud Welder. Operator's Instruction andMaintenance Manual. Includes a Wiring Diagram.

MK455B KERRY ULTRASONICS CD-550 Portable Stud Welder. Operator's Instructionand Maintenance Manual. Includes a Wiring Diagram.

MK455C KERRY ULTRASONICS 3-stage Cleaning Equipment incorporating the KS2000Ultrasonic Generator. Operator's Instruction and Maintenance Manual.

MK460 KENCO Screwing Machines: All sizes from 2 to 4-3. Operating Manual.

MK460A KENCO Screwing Machines Model6-3. Operating Manual.

MK462B KENNEDY Miniature HACKSAWS Models 60 & 90. Sales & TechnicalSpecification Catalogues with Operation, Maintenance and Set-up Instructions. 8pages.

MK468 King (King Rich) Lathe Type KC-1440B.Operation and Maintenance Manual with Parts as Exploded Component Drawings.

MK470 KING (King Rich) TFY-515 Vertical Milling Machine. Instruction Manualwith Parts as Exploded Component Drawings.

MK470A KING (King Rich) TFY-1050 & TFY-1054 Vertical Turret MillingMachine. Instruction Manual with Parts as Exploded Component Drawings.

MK470B KING (King Rich) Turret Vertical Milling machine. Operator's Instructionand Maintenance Manual with separate Variable-speed Head Manual.

MK470C KING (King Rich) Milling Machine DPM (KR-B2CNC) Instruction Manual with Lubrication Schematic and a Parts Manual as Sectional Drawings.

MK478 KINGHORN Punching Press Model "Acorn" Type 120/8/10 OperatingInstructions. (not a first-class copy)

MK478A KINGHORN Press Brake Model 180/10 (applies to other models in the Series as well). OperatingInstructions and Spare Parts List with Drawings.

MK485 Kingsland J14 Power Punching and Shaping machine. Operator's Instructionand Maintenance Instructions.

MK485A Kingsland 115XS Hydraulic Steelworker.Operating Instructions withElectrical and Hydraulic Schematics.

<