Docker Network dies on Rackspace Cloud
236 views
Skip to first unread message
Brian Lewis
May 12, 2014, 7:05:53 PM5/12/14
to coreo...@googlegroups.com
Hello CoreOS team,This isn't a CoreOS issue directly, but I figured someone here might have run into this issue (I emailed Polvi first actually!). We have been having an ongoing recurring issue with running docker on Rackspace cloud servers where the bridged networking will stop working. In other words, a container will lose connectivity outward. We have experienced this with ubuntu 12.04, 13.10, and now 14.04 on different machines types with the same result. We have not been able to reproduce this issue on amazon web services, digital ocean, boot2docker (osx/vagrant), nor in house ubuntu servers running the same version(s) of docker.What essentially happens is - the container works fine, then network dies completely. You can't ping from the bridge (docker0) to the interface (eth1). The crazy part is - it doesn't die until ~24 hours. Previously, on Ubuntu 12.04 we could fix this by restarting networking and restarting the docker service. Restarting networking is no longer required, however, restarting the docker service DOES seem to fix this.
I have a theory that it is related to promiscious mode on the hypervisors at Rackspace but I'm not sure if that's completely accurate. I've reached out to Rackspace as well, but I figured I might have some luck here. I'm going to cross post this to the docker list as well to see if anyone may have run into it there. Below are some logs - I'm happy to provide anything needed if anyone else wants to help dig in :-)from docker logs when building a container :: May 12 20:27:45 util02 kernel: [354708.553361] netlink: 1 bytes leftover after parsing attributes. May 12 20:27:45 util02 kernel: [354708.558794] IPv6: ADDRCONF(NETDEV_UP): vethdc66: link is not ready May 12 20:27:45 util02 kernel: [354708.558801] device vethdc66 entered promiscuous mode May 12 20:27:45 util02 kernel: [354708.580402] IPv6: ADDRCONF(NETDEV_CHANGE): vethdc66: link becomes ready May 12 20:27:45 util02 kernel: [354708.580451] docker0: port 3(vethdc66) entered forwarding state May 12 20:27:45 util02 kernel: [354708.580458] docker0: port 3(vethdc66) entered forwarding state mortiz@util02:~$ sudo tcpdump -vvvvvvv -i docker0 port not 22 tcpdump: listening on docker0, link-type EN10MB (Ethernet), capture size 65535 bytes 20:08:49.825546 IP (tos 0x0, ttl 64, id 32584, offset 0, flags [DF], proto ICMP (1), length 84) 172.17.0.4 > google-public-dns-a.google.com: ICMP echo request, id 15, seq 448, length 64 20:08:50.833485 IP (tos 0x0, ttl 64, id 32585, offset 0, flags [DF], proto ICMP (1), length 84) 172.17.0.4 > google-public-dns-a.google.com: ICMP echo request, id 15, seq 449, length 64 ^C 2 packets captured 2 packets received by filter 0 packets dropped by kernel mortiz@util02:~$ sudo tcpdump -vvvvvvv -i eth1 port not 22 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel root@util01:/etc/network# brctl show docker0 bridge name bridge id STP enabled interfaces docker0 8000.5a6c618e0ee4 no vethd9de root@util01:/etc/network#== dmsg ==[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=/dev/xvda1 ro splash quiet vt.handoff=7[ 0.000000] KERNEL supported cpus:[ 0.000000] Intel GenuineIntel[ 0.000000] AMD AuthenticAMD[ 0.000000] Centaur CentaurHauls[ 0.000000] e820: BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fbfffff] usable[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved[ 0.000000] NX (Execute Disable) protection: active[ 0.000000] SMBIOS 2.4 present.[ 0.000000] DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013[ 0.000000] Hypervisor detected: Xen HVM[ 0.000000] Xen version 4.1.[ 0.000000] Xen Platform PCI: I/O protocol version 1[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.[ 0.000000] You might have to change the root device[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d][ 0.000000] in your root= kernel command line option[ 0.000000] HVMOP_pagetable_dying not supported[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable[ 0.000000] No AGP bridge found[ 0.000000] e820: last_pfn = 0x7fc00 max_arch_pfn = 0x400000000[ 0.000000] MTRR default type: write-back[ 0.000000] MTRR fixed ranges enabled:[ 0.000000] 00000-9FFFF write-back[ 0.000000] A0000-BFFFF write-combining[ 0.000000] C0000-FFFFF write-back[ 0.000000] MTRR variable ranges enabled:[ 0.000000] 0 base 0000F0000000 mask 3FFFF8000000 uncachable[ 0.000000] 1 base 0000F8000000 mask 3FFFFC000000 uncachable[ 0.000000] 2 disabled[ 0.000000] 3 disabled[ 0.000000] 4 disabled[ 0.000000] 5 disabled[ 0.000000] 6 disabled[ 0.000000] 7 disabled[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[ 0.000000] found SMP MP-table at [mem 0x000fb730-0x000fb73f] mapped at [ffff8800000fb730][ 0.000000] Scanning 1 areas for low memory corruption[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff][ 0.000000] [mem 0x00000000-0x000fffff] page 4k[ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE[ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE[ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff][ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7f9fffff][ 0.000000] [mem 0x7c000000-0x7f9fffff] page 2M[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff][ 0.000000] [mem 0x00100000-0x001fffff] page 4k[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M[ 0.000000] RAMDISK: [mem 0x352c2000-0x36958fff][ 0.000000] ACPI: RSDP 00000000000ea020 000024 (v02 Xen)[ 0.000000] ACPI: XSDT 00000000fc00ef80 000044 (v01 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: FACP 00000000fc00ed40 0000F4 (v04 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: DSDT 00000000fc003040 00BC75 (v02 Xen HVM 00000000 INTL 20090123)[ 0.000000] ACPI: FACS 00000000fc003000 000040[ 0.000000] ACPI: APIC 00000000fc00ee40 0000D8 (v02 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: HPET 00000000fc00ef20 000038 (v01 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: WAET 00000000fc00ef58 000028 (v01 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] No NUMA configuration found[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fbfffff][ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fbfffff][ 0.000000] NODE_DATA [mem 0x7fbfb000-0x7fbfffff][ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0[ 0.000000] Zone ranges:[ 0.000000] DMA [mem 0x00001000-0x00ffffff][ 0.000000] DMA32 [mem 0x01000000-0xffffffff][ 0.000000] Normal empty[ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x00001000-0x0009dfff][ 0.000000] node 0: [mem 0x00100000-0x7fbfffff][ 0.000000] On node 0 totalpages: 523165[ 0.000000] DMA zone: 64 pages used for memmap[ 0.000000] DMA zone: 21 pages reserved[ 0.000000] DMA zone: 3997 pages, LIFO batch:0[ 0.000000] DMA32 zone: 8112 pages used for memmap[ 0.000000] DMA32 zone: 519168 pages, LIFO batch:31[ 0.000000] ACPI: PM-Timer IO Port: 0x1f48[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ5 used by override.[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] ACPI: IRQ10 used by override.[ 0.000000] ACPI: IRQ11 used by override.[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000[ 0.000000] smpboot: Allowing 15 CPUs, 13 hotplug CPUs[ 0.000000] nr_irqs_gsi: 64[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff][ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff][ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff][ 0.000000] e820: [mem 0x7fc00000-0xfbffffff] available for PCI devices[ 0.000000] Booting paravirtualized kernel on Xen HVM[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86336 r8192 d24256 u131072[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514968[ 0.000000] Policy zone: DMA32[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=/dev/xvda1 ro splash quiet vt.handoff=7[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Checking aperture...[ 0.000000] No AGP bridge found[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing![ 0.000000] Memory: 2018392K/2092660K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 74268K reserved)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1[ 0.000000] Hierarchical RCU implementation.[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=15.[ 0.000000] Offload RCU callbacks from all CPUs[ 0.000000] Offload RCU callbacks from CPUs: 0-14.[ 0.000000] NR_IRQS:16640 nr_irqs:1208 16[ 0.000000] xen:events: Xen HVM callback vector for event delivery is enabled[ 0.000000] Console: colour dummy device 80x25[ 0.000000] console [tty0] enabled[ 0.000000] Cannot get hvm parameter CONSOLE_EVTCHN (18): -22![ 0.000000] allocated 8388608 bytes of page_cgroup[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups[ 0.000000] hpet clockevent registered[ 0.000000] tsc: Detected 2600.058 MHz processor[ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.11 BogoMIPS (lpj=10400232)[ 0.008000] pid_max: default: 32768 minimum: 301[ 0.008000] Security Framework initialized[ 0.008000] AppArmor: AppArmor initialized[ 0.008000] Yama: becoming mindful.[ 0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)[ 0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.008000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.008000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.008000] Initializing cgroup subsys memory[ 0.008000] Initializing cgroup subsys devices[ 0.008000] Initializing cgroup subsys freezer[ 0.008000] Initializing cgroup subsys blkio[ 0.008000] Initializing cgroup subsys perf_event[ 0.008000] Initializing cgroup subsys hugetlb[ 0.008000] mce: CPU supports 0 MCE banks[ 0.008000] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0[ 0.008000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32[ 0.008000] tlb_flushall_shift: 5[ 0.008000] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)[ 0.008748] ACPI: Core revision 20131115[ 0.011971] ACPI: All ACPI Tables successfully acquired[ 0.011976] ftrace: allocating 28408 entries in 111 pages[ 0.048007] Switched APIC routing to physical flat.[ 0.049897] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0[ 0.090118] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (fam: 06, model: 2d, stepping: 07)[ 0.090137] Xen: using vcpuop timer interface[ 0.090146] installing Xen timer for CPU 0[ 0.090242] cpu 0 spinlock event irq 69[ 0.093943] Performance Events: unsupported p6 CPU model 45 no PMU driver, software events only.[ 0.095736] NMI watchdog: disabled (cpu0): hardware events not enabled[ 0.095801] installing Xen timer for CPU 1[ 0.095861] x86: Booting SMP configuration:[ 0.095721] mce: CPU supports 0 MCE banks[ 0.095862] .... node #0, CPUs: #1cpu 1 spinlock event irq 75[ 0.188083] x86: Booted up 1 node, 2 CPUs[ 0.188086] smpboot: Total of 2 processors activated (10475.73 BogoMIPS)[ 0.188540] devtmpfs: initialized[ 0.190140] EVM: security.selinux[ 0.190142] EVM: security.SMACK64[ 0.190143] EVM: security.ima[ 0.190144] EVM: security.capability[ 0.190174] pinctrl core: initialized pinctrl subsystem[ 0.190174] regulator-dummy: no parameters[ 0.190174] RTC time: 17:55:57, date: 05/08/14[ 0.190174] NET: Registered protocol family 16[ 0.192074] cpuidle: using governor ladder[ 0.192076] cpuidle: using governor menu[ 0.192114] ACPI: bus type PCI registered[ 0.192116] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5[ 0.192267] PCI: Using configuration type 1 for base access[ 0.192950] bio: create slab <bio-0> at 0[ 0.192950] ACPI: Added _OSI(Module Device)[ 0.192950] ACPI: Added _OSI(Processor Device)[ 0.192950] ACPI: Added _OSI(3.0 _SCP Extensions)[ 0.192950] ACPI: Added _OSI(Processor Aggregator Device)[ 0.198686] ACPI: Interpreter enabled[ 0.198692] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)[ 0.198696] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)[ 0.198699] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)[ 0.198701] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)[ 0.198707] ACPI: (supports S0 S5)[ 0.198709] ACPI: Using IOAPIC for interrupt routing[ 0.198731] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug[ 0.223569] ACPI: No dock devices found.[ 0.277255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])[ 0.277264] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI][ 0.277271] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM[ 0.277339] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.[ 0.278210] acpiphp: Slot [0] registered[ 0.278846] acpiphp: Slot [3] registered[ 0.278906] acpiphp: Slot [4] registered[ 0.278970] acpiphp: Slot [5] registered[ 0.279031] acpiphp: Slot [6] registered[ 0.279092] acpiphp: Slot [7] registered[ 0.279159] acpiphp: Slot [8] registered[ 0.279224] acpiphp: Slot [9] registered[ 0.279275] acpiphp: Slot [10] registered[ 0.279318] acpiphp: Slot [11] registered[ 0.279363] acpiphp: Slot [12] registered[ 0.279405] acpiphp: Slot [13] registered[ 0.279447] acpiphp: Slot [14] registered[ 0.279491] acpiphp: Slot [15] registered[ 0.279535] acpiphp: Slot [16] registered[ 0.279580] acpiphp: Slot [17] registered[ 0.279621] acpiphp: Slot [18] registered[ 0.279665] acpiphp: Slot [19] registered[ 0.279707] acpiphp: Slot [20] registered[ 0.279749] acpiphp: Slot [21] registered[ 0.279794] acpiphp: Slot [22] registered[ 0.279841] acpiphp: Slot [23] registered[ 0.279886] acpiphp: Slot [24] registered[ 0.279928] acpiphp: Slot [25] registered[ 0.279972] acpiphp: Slot [26] registered[ 0.280000] acpiphp: Slot [27] registered[ 0.280012] acpiphp: Slot [28] registered[ 0.280059] acpiphp: Slot [29] registered[ 0.280108] acpiphp: Slot [30] registered[ 0.280154] acpiphp: Slot [31] registered[ 0.280190] PCI host bridge to bus 0000:00[ 0.280193] pci_bus 0000:00: root bus resource [bus 00-ff][ 0.280195] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7][ 0.280196] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff][ 0.280198] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff][ 0.280200] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff][ 0.280321] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000[ 0.281576] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100[ 0.283150] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180[ 0.283983] pci 0000:00:01.1: reg 0x20: [io 0xc620-0xc62f][ 0.284779] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300[ 0.285528] pci 0000:00:01.2: reg 0x20: [io 0xc600-0xc61f][ 0.286303] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000[ 0.286325] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,[ 0.286325] * this clock source is slow. Consider trying other clock sources[ 0.287046] pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI[ 0.287672] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000[ 0.287863] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref][ 0.287999] pci 0000:00:02.0: reg 0x14: [mem 0xf3000000-0xf3000fff][ 0.289319] pci 0000:00:03.0: [5853:0001] type 00 class 0x010000[ 0.289924] pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff][ 0.290055] pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref][ 0.291452] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)[ 0.291603] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)[ 0.291740] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)[ 0.291873] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)[ 0.312364] ACPI: Enabled 2 GPEs in block 00 to 1F[ 0.312376] ACPI: \_SB_.PCI0: notify handler is installed[ 0.312493] Found 1 acpi root devices[ 0.312522] xen:balloon: Initialising balloon driver[ 0.312549] xen_balloon: Initialising balloon driver[ 0.312549] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none[ 0.312549] vgaarb: loaded[ 0.312549] vgaarb: bridge control possible 0000:00:02.0[ 0.312549] init_memory_mapping: [mem 0x80000000-0x87ffffff][ 0.312549] [mem 0x80000000-0x87ffffff] page 2M[ 0.312549] SCSI subsystem initialized[ 0.312863] libata version 3.00 loaded.[ 0.312863] ACPI: bus type USB registered[ 0.316009] usbcore: registered new interface driver usbfs[ 0.316019] usbcore: registered new interface driver hub[ 0.316027] usbcore: registered new device driver usb[ 0.316051] PCI: Using ACPI for IRQ routing[ 0.316051] PCI: pci_cache_line_size set to 64 bytes[ 0.316335] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff][ 0.316337] e820: reserve RAM buffer [mem 0x7fc00000-0x7fffffff][ 0.316429] NetLabel: Initializing[ 0.316431] NetLabel: domain hash size = 128[ 0.316431] NetLabel: protocols = UNLABELED CIPSOv4[ 0.316445] NetLabel: unlabeled traffic allowed by default[ 0.316466] HPET: 3 timers in total, 0 timers will be used for per-cpu timer[ 0.316466] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0[ 0.316466] hpet0: 3 comparators, 64-bit 62.500000 MHz counter[ 0.319111] Switched to clocksource xen[ 0.320988] AppArmor: AppArmor Filesystem Enabled[ 0.321013] pnp: PnP ACPI init[ 0.321024] ACPI: bus type PNP registered[ 0.321085] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved[ 0.321089] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.321135] system 00:01: [io 0x10c0-0x1141] has been reserved[ 0.321137] system 00:01: [io 0xb044-0xb047] has been reserved[ 0.321139] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.321184] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)[ 0.321225] system 00:03: [io 0x08a0-0x08a3] has been reserved[ 0.321227] system 00:03: [io 0x0cc0-0x0ccf] has been reserved[ 0.321229] system 00:03: [io 0x04d0-0x04d1] has been reserved[ 0.321231] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.321241] pnp 00:04: [dma 4][ 0.321253] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)[ 0.321275] xen: --> pirq=16 -> irq=8 (gsi=8)[ 0.321290] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)[ 0.321309] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)[ 0.321327] xen: --> pirq=17 -> irq=12 (gsi=12)[ 0.321342] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)[ 0.321359] xen: --> pirq=18 -> irq=1 (gsi=1)[ 0.321372] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)[ 0.321388] xen: --> pirq=19 -> irq=6 (gsi=6)[ 0.321390] pnp 00:09: [dma 2][ 0.321407] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)[ 0.321428] xen: --> pirq=20 -> irq=4 (gsi=4)[ 0.321441] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)[ 0.321468] xen: --> pirq=21 -> irq=7 (gsi=7)[ 0.321484] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)[ 0.342349] pnp: PnP ACPI: found 12 devices[ 0.342355] ACPI: bus type PNP unregistered[ 0.350167] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7][ 0.350171] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff][ 0.350172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff][ 0.350174] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff][ 0.350213] NET: Registered protocol family 2[ 0.350371] TCP established hash table entries: 16384 (order: 5, 131072 bytes)[ 0.350413] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)[ 0.350446] TCP: Hash tables configured (established 16384 bind 16384)[ 0.350480] TCP: reno registered[ 0.350487] UDP hash table entries: 1024 (order: 3, 32768 bytes)[ 0.350497] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)[ 0.350578] NET: Registered protocol family 1[ 0.350588] pci 0000:00:00.0: Limiting direct PCI/PCI transfers[ 0.350643] pci 0000:00:01.0: PIIX3: Enabling Passive Release[ 0.350689] pci 0000:00:01.0: Activating ISA DMA hang workarounds[ 0.351002] xen: --> pirq=22 -> irq=23 (gsi=23)[ 0.351622] pci 0000:00:02.0: Boot video device[ 0.351671] PCI: CLS 0 bytes, default 64[ 0.351758] Trying to unpack rootfs image as initramfs...[ 0.714738] Freeing initrd memory: 23132K (ffff8800352c2000 - ffff880036959000)[ 0.714988] microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70d[ 0.715013] microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70d[ 0.715152] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba[ 0.715156] Scanning for low memory corruption every 60 seconds[ 0.715757] Initialise system trusted keyring[ 0.715824] audit: initializing netlink socket (disabled)[ 0.715845] type=2000 audit(1399571757.684:1): initialized[ 0.740434] HugeTLB registered 2 MB page size, pre-allocated 0 pages[ 0.741572] VFS: Disk quotas dquot_6.5.2[ 0.741617] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.742061] fuse init (API version 7.22)[ 0.742117] msgmni has been set to 3987[ 0.742169] Key type big_key registered[ 0.742983] Key type asymmetric registered[ 0.742985] Asymmetric key parser 'x509' registered[ 0.743012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)[ 0.743073] io scheduler noop registered[ 0.743075] io scheduler deadline registered (default)[ 0.743098] io scheduler cfq registered[ 0.743162] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[ 0.743174] pciehp: PCI Express Hot Plug Controller Driver version: 0.4[ 0.743212] efifb: probing for efifb[ 0.743290] efifb: framebuffer at 0xf0000000, mapped to 0xffffc90000400000, using 1408k, total 1408k[ 0.743292] efifb: mode is 800x600x24, linelength=2400, pages=1[ 0.743292] efifb: scrolling: redraw[ 0.743294] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0[ 0.745147] Console: switching to colour frame buffer device 100x37[ 0.746907] fb0: EFI VGA frame buffer device[ 0.746920] intel_idle: does not run on family 6 model 45[ 0.746926] ipmi message handler version 39.2[ 0.746978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0[ 0.746983] ACPI: Power Button [PWRF][ 0.747019] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1[ 0.747022] ACPI: Sleep Button [SLPF][ 0.747120] GHES: HEST is not enabled![ 0.747496] xen: --> pirq=23 -> irq=30 (gsi=30)[ 0.747624] xen:grant_table: Grant tables using version 1 layout[ 0.747650] Grant table initialized[ 0.747698] Cannot get hvm parameter CONSOLE_EVTCHN (18): -22![ 0.747700] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled[ 0.777869] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A[ 0.779331] Linux agpgart interface v0.103[ 0.780969] brd: module loaded[ 0.781778] loop: module loaded[ 0.787475] ata_piix 0000:00:01.1: version 2.13[ 0.789278] blkfront: xvde: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;[ 0.789319] scsi0 : ata_piix[ 0.789467] scsi1 : ata_piix[ 0.789517] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc620 irq 14[ 0.789519] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc628 irq 15[ 0.789965] libphy: Fixed MDIO Bus: probed[ 0.790089] tun: Universal TUN/TAP device driver, 1.6[ 0.790091] tun: (C) 1999-2004 Max Krasnyansky <ma...@qualcomm.com>[ 0.790770] PPP generic driver version 2.4.2[ 0.791617] xen_netfront: Initialising Xen virtual ethernet driver[ 0.793195] xvde: unknown partition table[ 0.794488] blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;[ 0.795931] xvda: xvda1[ 0.816685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 0.816699] ehci-pci: EHCI PCI platform driver[ 0.816733] ehci-platform: EHCI generic platform driver[ 0.816750] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 0.816752] ohci-pci: OHCI PCI platform driver[ 0.816758] ohci-platform: OHCI generic platform driver[ 0.816763] uhci_hcd: USB Universal Host Controller Interface driver[ 0.817323] uhci_hcd 0000:00:01.2: UHCI Host Controller[ 0.817330] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1[ 0.817701] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c600[ 0.818117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001[ 0.818119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.818125] usb usb1: Product: UHCI Host Controller[ 0.818127] usb usb1: Manufacturer: Linux 3.13.0-24-generic uhci_hcd[ 0.818129] usb usb1: SerialNumber: 0000:00:01.2[ 0.818351] hub 1-0:1.0: USB hub found[ 0.818373] hub 1-0:1.0: 2 ports detected[ 0.818765] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12[ 0.820803] serio: i8042 KBD port at 0x60,0x64 irq 1[ 0.820811] serio: i8042 AUX port at 0x60,0x64 irq 12[ 0.821026] mousedev: PS/2 mouse device common for all mice[ 0.822003] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2[ 0.822610] rtc_cmos 00:05: RTC can wake from S4[ 0.822764] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0[ 0.822809] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs[ 0.822926] device-mapper: uevent: version 1.0.3[ 0.823015] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-d...@redhat.com[ 0.823026] ledtrig-cpu: registered to indicate activity on CPUs[ 0.823119] TCP: cubic registered[ 0.823210] NET: Registered protocol family 10[ 0.823552] NET: Registered protocol family 17[ 0.823566] Key type dns_resolver registered[ 0.823906] Loading compiled-in X.509 certificates[ 0.824880] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'[ 0.824929] registered taskstats version 1[ 0.828351] Key type trusted registered[ 0.831495] Key type encrypted registered[ 0.833552] AppArmor: AppArmor sha1 policy hashing enabled[ 0.833556] IMA: No TPM chip found, activating TPM-bypass![ 0.833811] regulator-dummy: disabling[ 0.833874] Magic number: 14:288:946[ 0.833914] tty tty3: hash matches[ 0.833931] processor cpu1: hash matches[ 0.833972] rtc_cmos 00:05: setting system clock to 2014-05-08 17:55:57 UTC (1399571757)[ 0.834061] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[ 0.834063] EDD information not available.[ 0.834084] PM: Hibernation image not present or could not be loaded.[ 0.947124] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)[ 0.947129] Write protecting the kernel read-only data: 12288k[ 0.949510] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)[ 0.951192] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)[ 0.970553] systemd-udevd[132]: starting version 204[ 1.010652] FDC 0 is a S82078B[ 1.128140] usb 1-2: new full-speed USB device number 2 using uhci_hcd[ 1.712141] tsc: Refined TSC clocksource calibration: 2599.999 MHz[ 1.882836] usb 1-2: New USB device found, idVendor=0627, idProduct=0001[ 1.882841] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.882843] usb 1-2: Product: QEMU USB Tablet[ 1.882845] usb 1-2: Manufacturer: QEMU 0.10.2[ 1.882847] usb 1-2: SerialNumber: 1[ 2.111313] hidraw: raw HID events driver (C) Jiri Kosina[ 2.315765] usbcore: registered new interface driver usbhid[ 2.315769] usbhid: USB HID core driver[ 2.317793] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4[ 2.318518] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0[ 2.405606] EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)[ 2.550852] random: init urandom read with 91 bits of entropy available[ 2.776489] EXT4-fs (xvda1): re-mounted. Opts: errors=remount-ro,barrier=0[ 2.847243] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 2.847250] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready[ 2.847255] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready[ 2.847259] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready[ 2.847263] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready[ 2.903624] systemd-udevd[412]: starting version 204[ 2.968105] random: nonblocking pool is initialized[ 3.007558] lp: driver loaded but no devices found[ 3.015282] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr[ 3.038816] parport_pc 00:0b: reported by Plug and Play ACPI[ 3.039409] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE][ 3.137203] lp0: using parport0 (interrupt-driven).[ 3.192961] type=1400 audit(1399571759.857:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=481 comm="apparmor_parser"[ 3.192968] type=1400 audit(1399571759.857:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"[ 3.192973] type=1400 audit(1399571759.857:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"[ 3.193390] type=1400 audit(1399571759.857:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"[ 3.193396] type=1400 audit(1399571759.857:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"[ 3.193607] type=1400 audit(1399571759.857:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"[ 3.194357] type=1400 audit(1399571759.857:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=480 comm="apparmor_parser"[ 3.194362] type=1400 audit(1399571759.857:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"[ 3.194366] type=1400 audit(1399571759.857:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"[ 3.382361] ppdev: user-space parallel port driver[ 4.116601] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5[ 4.377746] ip_tables: (C) 2000-2006 Netfilter Core Team[ 4.383849] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 6.326076] init: udev-fallback-graphics main process (796) terminated with status 1[ 19.585773] init: failsafe main process (1090) killed by TERM signal[ 19.726953] aufs 3.13-20140303[ 19.761710] Bridge firewalling registered[ 19.897894] audit_printk_skb: 63 callbacks suppressed[ 19.897898] type=1400 audit(1399571776.895:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1314 comm="apparmor_parser"[ 19.897906] type=1400 audit(1399571776.895:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1314 comm="apparmor_parser"[ 19.897911] type=1400 audit(1399571776.895:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1314 comm="apparmor_parser"[ 19.898324] type=1400 audit(1399571776.895:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1314 comm="apparmor_parser"[ 19.898328] type=1400 audit(1399571776.895:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1314 comm="apparmor_parser"[ 19.898541] type=1400 audit(1399571776.895:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1314 comm="apparmor_parser"[ 19.904220] type=1400 audit(1399571776.903:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1313 comm="apparmor_parser"[ 19.917021] type=1400 audit(1399571776.915:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1316 comm="apparmor_parser"[ 20.230581] cgroup: systemd-logind (1163) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.[ 20.230586] cgroup: "memory" requires setting use_hierarchy to 1 on the root.[ 21.261815] bio: create slab <bio-1> at 1[ 21.418181] bio: create slab <bio-1> at 1[ 21.479114] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled[ 21.483483] XFS (dm-0): Mounting Filesystem[ 21.518746] XFS (dm-0): Ending clean mount[ 21.636897] init: plymouth-upstart-bridge main process ended, respawning[ 40.484326] init: docker.io main process (1145) killed by TERM signal[ 44.498683] netlink: 1 bytes leftover after parsing attributes.[ 44.499409] IPv6: ADDRCONF(NETDEV_UP): vethe5ad: link is not ready[ 44.499414] device vethe5ad entered promiscuous mode[ 44.499458] docker0: port 1(vethe5ad) entered forwarding state[ 44.499463] docker0: port 1(vethe5ad) entered forwarding state[ 44.500232] docker0: port 1(vethe5ad) entered disabled state[ 44.521918] IPv6: ADDRCONF(NETDEV_CHANGE): vethe5ad: link becomes ready[ 44.521956] docker0: port 1(vethe5ad) entered forwarding state[ 44.521962] docker0: port 1(vethe5ad) entered forwarding state[ 59.552079] docker0: port 1(vethe5ad) entered forwarding state[ 246.668393] docker0: port 1(vethe5ad) entered disabled state[ 246.668681] device vethe5ad left promiscuous mode[ 246.668687] docker0: port 1(vethe5ad) entered disabled state[ 257.798882] init: docker.io main process (1708) killed by TERM signal[ 257.818832] init: networking post-stop process (2090) terminated with status 100[ 302.143934] netlink: 1 bytes leftover after parsing attributes.[ 302.153213] IPv6: ADDRCONF(NETDEV_UP): vetha16d: link is not ready[ 302.153220] device vetha16d entered promiscuous mode[ 302.172825] IPv6: ADDRCONF(NETDEV_CHANGE): vetha16d: link becomes ready[ 302.172881] docker0: port 1(vetha16d) entered forwarding state[ 302.172889] docker0: port 1(vetha16d) entered forwarding state[ 317.216083] docker0: port 1(vetha16d) entered forwarding state[ 532.290303] type=1400 audit(1399572289.290:40): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291063] type=1400 audit(1399572289.290:41): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291079] type=1400 audit(1399572289.290:42): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291102] type=1400 audit(1399572289.290:43): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291193] type=1400 audit(1399572289.290:44): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291223] type=1400 audit(1399572289.290:45): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291306] type=1400 audit(1399572289.290:46): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291320] type=1400 audit(1399572289.290:47): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291339] type=1400 audit(1399572289.290:48): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291421] type=1400 audit(1399572289.290:49): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 1018.216331] docker0: port 1(vetha16d) entered disabled state[ 1018.216618] device vetha16d left promiscuous mode[ 1018.216624] docker0: port 1(vetha16d) entered disabled state[ 1443.719130] nr_pdflush_threads exported in /proc is scheduled for removal[ 1443.719290] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linu...@kvack.org.[91251.997208] ip6_tables: (C) 2000-2006 Netfilter Core Team[99962.143660] init: docker.io main process (2127) killed by TERM signal[350728.028438] netlink: 1 bytes leftover after parsing attributes.[350728.036435] IPv6: ADDRCONF(NETDEV_UP): vethfe48: link is not ready[350728.036444] device vethfe48 entered promiscuous mode[350728.052931] IPv6: ADDRCONF(NETDEV_CHANGE): vethfe48: link becomes ready[350728.052965] docker0: port 1(vethfe48) entered forwarding state[350728.052971] docker0: port 1(vethfe48) entered forwarding state[350733.180420] docker0: port 1(vethfe48) entered disabled state[350733.180717] device vethfe48 left promiscuous mode[350733.180725] docker0: port 1(vethfe48) entered disabled state[350747.602228] netlink: 1 bytes leftover after parsing attributes.[350747.619569] IPv6: ADDRCONF(NETDEV_UP): vethb255: link is not ready[350747.619578] device vethb255 entered promiscuous mode[350747.640883] IPv6: ADDRCONF(NETDEV_CHANGE): vethb255: link becomes ready[350747.640915] docker0: port 1(vethb255) entered forwarding state[350747.640921] docker0: port 1(vethb255) entered forwarding state[350762.656096] docker0: port 1(vethb255) entered forwarding state[350766.908356] docker0: port 1(vethb255) entered disabled state[350766.908655] device vethb255 left promiscuous mode[350766.908661] docker0: port 1(vethb255) entered disabled state[350791.634825] netlink: 1 bytes leftover after parsing attributes.[350791.641405] IPv6: ADDRCONF(NETDEV_UP): vethb3b8: link is not ready[350791.641411] device vethb3b8 entered promiscuous mode[350791.660898] IPv6: ADDRCONF(NETDEV_CHANGE): vethb3b8: link becomes ready[350791.660931] docker0: port 1(vethb3b8) entered forwarding state[350791.660937] docker0: port 1(vethb3b8) entered forwarding state[350796.680346] docker0: port 1(vethb3b8) entered disabled state[350796.680619] device vethb3b8 left promiscuous mode[350796.680625] docker0: port 1(vethb3b8) entered disabled state[352734.883155] netlink: 1 bytes leftover after parsing attributes.[352734.891493] IPv6: ADDRCONF(NETDEV_UP): veth3cb4: link is not ready[352734.891501] device veth3cb4 entered promiscuous mode[352734.916458] IPv6: ADDRCONF(NETDEV_CHANGE): veth3cb4: link becomes ready[352734.916494] docker0: port 1(veth3cb4) entered forwarding state[352734.916499] docker0: port 1(veth3cb4) entered forwarding state[352749.920073] docker0: port 1(veth3cb4) entered forwarding state[352893.964324] docker0: port 1(veth3cb4) entered disabled state[352893.964664] device veth3cb4 left promiscuous mode[352893.964671] docker0: port 1(veth3cb4) entered disabled state[352946.621321] netlink: 1 bytes leftover after parsing attributes.[352946.622977] IPv6: ADDRCONF(NETDEV_UP): veth771a: link is not ready[352946.622984] device veth771a entered promiscuous mode[352946.644369] IPv6: ADDRCONF(NETDEV_CHANGE): veth771a: link becomes ready[352946.644402] docker0: port 1(veth771a) entered forwarding state[352946.644408] docker0: port 1(veth771a) entered forwarding state[352961.696091] docker0: port 1(veth771a) entered forwarding state[353043.255536] netlink: 1 bytes leftover after parsing attributes.[353043.258769] IPv6: ADDRCONF(NETDEV_UP): veth2b06: link is not ready[353043.258777] device veth2b06 entered promiscuous mode[353043.277202] IPv6: ADDRCONF(NETDEV_CHANGE): veth2b06: link becomes ready[353043.277254] docker0: port 2(veth2b06) entered forwarding state[353043.277261] docker0: port 2(veth2b06) entered forwarding state[353051.615169] netlink: 1 bytes leftover after parsing attributes.[353051.616252] IPv6: ADDRCONF(NETDEV_UP): vethfa19: link is not ready[353051.616259] device vethfa19 entered promiscuous mode[353051.641109] IPv6: ADDRCONF(NETDEV_CHANGE): vethfa19: link becomes ready[353051.641154] docker0: port 3(vethfa19) entered forwarding state[353051.641160] docker0: port 3(vethfa19) entered forwarding state[353058.304103] docker0: port 2(veth2b06) entered forwarding state[353066.656116] docker0: port 3(vethfa19) entered forwarding state[353464.040088] device docker0 entered promiscuous mode[353494.025462] device docker0 left promiscuous mode[353504.160133] device eth1 entered promiscuous mode[353510.570033] device eth1 left promiscuous mode[353515.744123] device eth1 entered promiscuous mode[353521.026072] device eth1 left promiscuous mode[353571.996084] device docker0 entered promiscuous mode[353574.482487] device docker0 left promiscuous mode[353578.384085] device eth1 entered promiscuous mode[353582.506654] device eth1 left promiscuous mode[353732.984289] docker0: port 3(vethfa19) entered disabled state[353732.984647] device vethfa19 left promiscuous mode[353732.984654] docker0: port 3(vethfa19) entered disabled state[353743.763295] netlink: 1 bytes leftover after parsing attributes.[353743.770368] IPv6: ADDRCONF(NETDEV_UP): vethc054: link is not ready[353743.770376] device vethc054 entered promiscuous mode[353743.792839] IPv6: ADDRCONF(NETDEV_CHANGE): vethc054: link becomes ready[353743.792876] docker0: port 3(vethc054) entered forwarding state[353743.792882] docker0: port 3(vethc054) entered forwarding state[353758.816091] docker0: port 3(vethc054) entered forwarding state[353779.568506] docker0: port 3(vethc054) entered disabled state[353779.568811] device vethc054 left promiscuous mode[353779.568818] docker0: port 3(vethc054) entered disabled state[354691.965063] netlink: 1 bytes leftover after parsing attributes.[354691.968537] IPv6: ADDRCONF(NETDEV_UP): veth4a85: link is not ready[354691.968544] device veth4a85 entered promiscuous mode[354691.988547] IPv6: ADDRCONF(NETDEV_CHANGE): veth4a85: link becomes ready[354691.988581] docker0: port 3(veth4a85) entered forwarding state[354691.988586] docker0: port 3(veth4a85) entered forwarding state[354699.044401] docker0: port 3(veth4a85) entered disabled state[354699.044765] device veth4a85 left promiscuous mode[354699.044772] docker0: port 3(veth4a85) entered disabled state[354708.553361] netlink: 1 bytes leftover after parsing attributes.[354708.558794] IPv6: ADDRCONF(NETDEV_UP): vethdc66: link is not ready[354708.558801] device vethdc66 entered promiscuous mode[354708.580402] IPv6: ADDRCONF(NETDEV_CHANGE): vethdc66: link becomes ready[354708.580451] docker0: port 3(vethdc66) entered forwarding state[354708.580458] docker0: port 3(vethdc66) entered forwarding state[354723.616095] docker0: port 3(vethdc66) entered forwarding state[357615.876554] docker0: port 3(vethdc66) entered disabled state[357615.876847] device vethdc66 left promiscuous mode[357615.876853] docker0: port 3(vethdc66) entered disabled state[357625.080207] netlink: 1 bytes leftover after parsing attributes.[357625.095823] IPv6: ADDRCONF(NETDEV_UP): veth8a95: link is not ready[357625.095831] device veth8a95 entered promiscuous mode[357625.128885] IPv6: ADDRCONF(NETDEV_CHANGE): veth8a95: link becomes ready[357625.128923] docker0: port 3(veth8a95) entered forwarding state[357625.128940] docker0: port 3(veth8a95) entered forwarding state[357640.160091] docker0: port 3(veth8a95) entered forwarding state[357747.176381] docker0: port 3(veth8a95) entered disabled state[357747.176843] device veth8a95 left promiscuous mode[357747.176850] docker0: port 3(veth8a95) entered disabled state[363089.576995] netlink: 1 bytes leftover after parsing attributes.[363089.577974] IPv6: ADDRCONF(NETDEV_UP): veth9eb7: link is not ready[363089.577980] device veth9eb7 entered promiscuous mode[363089.604451] IPv6: ADDRCONF(NETDEV_CHANGE): veth9eb7: link becomes ready[363089.604488] docker0: port 3(veth9eb7) entered forwarding state[363089.604494] docker0: port 3(veth9eb7) entered forwarding state[363093.896366] docker0: port 3(veth9eb7) entered disabled state[363093.896713] device veth9eb7 left promiscuous mode[363093.896720] docker0: port 3(veth9eb7) entered disabled stateroot@util02:~# dmesg &[1] 4253root@util02:~# [ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=/dev/xvda1 ro splash quiet vt.handoff=7[ 0.000000] KERNEL supported cpus:[ 0.000000] Intel GenuineIntel[ 0.000000] AMD AuthenticAMD[ 0.000000] Centaur CentaurHauls[ 0.000000] e820: BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fbfffff] usable[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved[ 0.000000] NX (Execute Disable) protection: active[ 0.000000] SMBIOS 2.4 present.[ 0.000000] DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013[ 0.000000] Hypervisor detected: Xen HVM[ 0.000000] Xen version 4.1.[ 0.000000] Xen Platform PCI: I/O protocol version 1[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.[ 0.000000] You might have to change the root device[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d][ 0.000000] in your root= kernel command line option[ 0.000000] HVMOP_pagetable_dying not supported[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable[ 0.000000] No AGP bridge found[ 0.000000] e820: last_pfn = 0x7fc00 max_arch_pfn = 0x400000000[ 0.000000] MTRR default type: write-back[ 0.000000] MTRR fixed ranges enabled:[ 0.000000] 00000-9FFFF write-back[ 0.000000] A0000-BFFFF write-combining[ 0.000000] C0000-FFFFF write-back[ 0.000000] MTRR variable ranges enabled:[ 0.000000] 0 base 0000F0000000 mask 3FFFF8000000 uncachable[ 0.000000] 1 base 0000F8000000 mask 3FFFFC000000 uncachable[ 0.000000] 2 disabled[ 0.000000] 3 disabled[ 0.000000] 4 disabled[ 0.000000] 5 disabled[ 0.000000] 6 disabled[ 0.000000] 7 disabled[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[ 0.000000] found SMP MP-table at [mem 0x000fb730-0x000fb73f] mapped at [ffff8800000fb730][ 0.000000] Scanning 1 areas for low memory corruption[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff][ 0.000000] [mem 0x00000000-0x000fffff] page 4k[ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE[ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE[ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff][ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7f9fffff][ 0.000000] [mem 0x7c000000-0x7f9fffff] page 2M[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff][ 0.000000] [mem 0x00100000-0x001fffff] page 4k[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M[ 0.000000] RAMDISK: [mem 0x352c2000-0x36958fff][ 0.000000] ACPI: RSDP 00000000000ea020 000024 (v02 Xen)[ 0.000000] ACPI: XSDT 00000000fc00ef80 000044 (v01 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: FACP 00000000fc00ed40 0000F4 (v04 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: DSDT 00000000fc003040 00BC75 (v02 Xen HVM 00000000 INTL 20090123)[ 0.000000] ACPI: FACS 00000000fc003000 000040[ 0.000000] ACPI: APIC 00000000fc00ee40 0000D8 (v02 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: HPET 00000000fc00ef20 000038 (v01 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: WAET 00000000fc00ef58 000028 (v01 Xen HVM 00000000 HVML 00000000)[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] No NUMA configuration found[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fbfffff][ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fbfffff][ 0.000000] NODE_DATA [mem 0x7fbfb000-0x7fbfffff][ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0[ 0.000000] Zone ranges:[ 0.000000] DMA [mem 0x00001000-0x00ffffff][ 0.000000] DMA32 [mem 0x01000000-0xffffffff][ 0.000000] Normal empty[ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x00001000-0x0009dfff][ 0.000000] node 0: [mem 0x00100000-0x7fbfffff][ 0.000000] On node 0 totalpages: 523165[ 0.000000] DMA zone: 64 pages used for memmap[ 0.000000] DMA zone: 21 pages reserved[ 0.000000] DMA zone: 3997 pages, LIFO batch:0[ 0.000000] DMA32 zone: 8112 pages used for memmap[ 0.000000] DMA32 zone: 519168 pages, LIFO batch:31[ 0.000000] ACPI: PM-Timer IO Port: 0x1f48[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ5 used by override.[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] ACPI: IRQ10 used by override.[ 0.000000] ACPI: IRQ11 used by override.[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000[ 0.000000] smpboot: Allowing 15 CPUs, 13 hotplug CPUs[ 0.000000] nr_irqs_gsi: 64[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff][ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff][ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff][ 0.000000] e820: [mem 0x7fc00000-0xfbffffff] available for PCI devices[ 0.000000] Booting paravirtualized kernel on Xen HVM[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86336 r8192 d24256 u131072[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514968[ 0.000000] Policy zone: DMA32[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=/dev/xvda1 ro splash quiet vt.handoff=7[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Checking aperture...[ 0.000000] No AGP bridge found[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing![ 0.000000] Memory: 2018392K/2092660K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 74268K reserved)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1[ 0.000000] Hierarchical RCU implementation.[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=15.[ 0.000000] Offload RCU callbacks from all CPUs[ 0.000000] Offload RCU callbacks from CPUs: 0-14.[ 0.000000] NR_IRQS:16640 nr_irqs:1208 16[ 0.000000] xen:events: Xen HVM callback vector for event delivery is enabled[ 0.000000] Console: colour dummy device 80x25[ 0.000000] console [tty0] enabled[ 0.000000] Cannot get hvm parameter CONSOLE_EVTCHN (18): -22![ 0.000000] allocated 8388608 bytes of page_cgroup[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups[ 0.000000] hpet clockevent registered[ 0.000000] tsc: Detected 2600.058 MHz processor[ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.11 BogoMIPS (lpj=10400232)[ 0.008000] pid_max: default: 32768 minimum: 301[ 0.008000] Security Framework initialized[ 0.008000] AppArmor: AppArmor initialized[ 0.008000] Yama: becoming mindful.[ 0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)[ 0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.008000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.008000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.008000] Initializing cgroup subsys memory[ 0.008000] Initializing cgroup subsys devices[ 0.008000] Initializing cgroup subsys freezer[ 0.008000] Initializing cgroup subsys blkio[ 0.008000] Initializing cgroup subsys perf_event[ 0.008000] Initializing cgroup subsys hugetlb[ 0.008000] mce: CPU supports 0 MCE banks[ 0.008000] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0[ 0.008000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32[ 0.008000] tlb_flushall_shift: 5[ 0.008000] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)[ 0.008748] ACPI: Core revision 20131115[ 0.011971] ACPI: All ACPI Tables successfully acquired[ 0.011976] ftrace: allocating 28408 entries in 111 pages[ 0.048007] Switched APIC routing to physical flat.[ 0.049897] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0[ 0.090118] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (fam: 06, model: 2d, stepping: 07)[ 0.090137] Xen: using vcpuop timer interface[ 0.090146] installing Xen timer for CPU 0[ 0.090242] cpu 0 spinlock event irq 69[ 0.093943] Performance Events: unsupported p6 CPU model 45 no PMU driver, software events only.[ 0.095736] NMI watchdog: disabled (cpu0): hardware events not enabled[ 0.095801] installing Xen timer for CPU 1[ 0.095861] x86: Booting SMP configuration:[ 0.095721] mce: CPU supports 0 MCE banks[ 0.095862] .... node #0, CPUs: #1cpu 1 spinlock event irq 75[ 0.188083] x86: Booted up 1 node, 2 CPUs[ 0.188086] smpboot: Total of 2 processors activated (10475.73 BogoMIPS)[ 0.188540] devtmpfs: initialized[ 0.190140] EVM: security.selinux[ 0.190142] EVM: security.SMACK64[ 0.190143] EVM: security.ima[ 0.190144] EVM: security.capability[ 0.190174] pinctrl core: initialized pinctrl subsystem[ 0.190174] regulator-dummy: no parameters[ 0.190174] RTC time: 17:55:57, date: 05/08/14[ 0.190174] NET: Registered protocol family 16[ 0.192074] cpuidle: using governor ladder[ 0.192076] cpuidle: using governor menu[ 0.192114] ACPI: bus type PCI registered[ 0.192116] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5[ 0.192267] PCI: Using configuration type 1 for base access[ 0.192950] bio: create slab <bio-0> at 0[ 0.192950] ACPI: Added _OSI(Module Device)[ 0.192950] ACPI: Added _OSI(Processor Device)[ 0.192950] ACPI: Added _OSI(3.0 _SCP Extensions)[ 0.192950] ACPI: Added _OSI(Processor Aggregator Device)[ 0.198686] ACPI: Interpreter enabled[ 0.198692] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)[ 0.198696] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)[ 0.198699] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)[ 0.198701] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)[ 0.198707] ACPI: (supports S0 S5)[ 0.198709] ACPI: Using IOAPIC for interrupt routing[ 0.198731] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug[ 0.223569] ACPI: No dock devices found.[ 0.277255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])[ 0.277264] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI][ 0.277271] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM[ 0.277339] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.[ 0.278210] acpiphp: Slot [0] registered[ 0.278846] acpiphp: Slot [3] registered[ 0.278906] acpiphp: Slot [4] registered[ 0.278970] acpiphp: Slot [5] registered[ 0.279031] acpiphp: Slot [6] registered[ 0.279092] acpiphp: Slot [7] registered[ 0.279159] acpiphp: Slot [8] registered[ 0.279224] acpiphp: Slot [9] registered[ 0.279275] acpiphp: Slot [10] registered[ 0.279318] acpiphp: Slot [11] registered[ 0.279363] acpiphp: Slot [12] registered[ 0.279405] acpiphp: Slot [13] registered[ 0.279447] acpiphp: Slot [14] registered[ 0.279491] acpiphp: Slot [15] registered[ 0.279535] acpiphp: Slot [16] registered[ 0.279580] acpiphp: Slot [17] registered[ 0.279621] acpiphp: Slot [18] registered[ 0.279665] acpiphp: Slot [19] registered[ 0.279707] acpiphp: Slot [20] registered[ 0.279749] acpiphp: Slot [21] registered[ 0.279794] acpiphp: Slot [22] registered[ 0.279841] acpiphp: Slot [23] registered[ 0.279886] acpiphp: Slot [24] registered[ 0.279928] acpiphp: Slot [25] registered[ 0.279972] acpiphp: Slot [26] registered[ 0.280000] acpiphp: Slot [27] registered[ 0.280012] acpiphp: Slot [28] registered[ 0.280059] acpiphp: Slot [29] registered[ 0.280108] acpiphp: Slot [30] registered[ 0.280154] acpiphp: Slot [31] registered[ 0.280190] PCI host bridge to bus 0000:00[ 0.280193] pci_bus 0000:00: root bus resource [bus 00-ff][ 0.280195] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7][ 0.280196] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff][ 0.280198] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff][ 0.280200] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff][ 0.280321] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000[ 0.281576] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100[ 0.283150] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180[ 0.283983] pci 0000:00:01.1: reg 0x20: [io 0xc620-0xc62f][ 0.284779] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300[ 0.285528] pci 0000:00:01.2: reg 0x20: [io 0xc600-0xc61f][ 0.286303] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000[ 0.286325] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,[ 0.286325] * this clock source is slow. Consider trying other clock sources[ 0.287046] pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI[ 0.287672] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000[ 0.287863] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref][ 0.287999] pci 0000:00:02.0: reg 0x14: [mem 0xf3000000-0xf3000fff][ 0.289319] pci 0000:00:03.0: [5853:0001] type 00 class 0x010000[ 0.289924] pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff][ 0.290055] pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref][ 0.291452] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)[ 0.291603] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)[ 0.291740] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)[ 0.291873] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)[ 0.312364] ACPI: Enabled 2 GPEs in block 00 to 1F[ 0.312376] ACPI: \_SB_.PCI0: notify handler is installed[ 0.312493] Found 1 acpi root devices[ 0.312522] xen:balloon: Initialising balloon driver[ 0.312549] xen_balloon: Initialising balloon driver[ 0.312549] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none[ 0.312549] vgaarb: loaded[ 0.312549] vgaarb: bridge control possible 0000:00:02.0[ 0.312549] init_memory_mapping: [mem 0x80000000-0x87ffffff][ 0.312549] [mem 0x80000000-0x87ffffff] page 2M[ 0.312549] SCSI subsystem initialized[ 0.312863] libata version 3.00 loaded.[ 0.312863] ACPI: bus type USB registered[ 0.316009] usbcore: registered new interface driver usbfs[ 0.316019] usbcore: registered new interface driver hub[ 0.316027] usbcore: registered new device driver usb[ 0.316051] PCI: Using ACPI for IRQ routing[ 0.316051] PCI: pci_cache_line_size set to 64 bytes[ 0.316335] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff][ 0.316337] e820: reserve RAM buffer [mem 0x7fc00000-0x7fffffff][ 0.316429] NetLabel: Initializing[ 0.316431] NetLabel: domain hash size = 128[ 0.316431] NetLabel: protocols = UNLABELED CIPSOv4[ 0.316445] NetLabel: unlabeled traffic allowed by default[ 0.316466] HPET: 3 timers in total, 0 timers will be used for per-cpu timer[ 0.316466] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0[ 0.316466] hpet0: 3 comparators, 64-bit 62.500000 MHz counter[ 0.319111] Switched to clocksource xen[ 0.320988] AppArmor: AppArmor Filesystem Enabled[ 0.321013] pnp: PnP ACPI init[ 0.321024] ACPI: bus type PNP registered[ 0.321085] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved[ 0.321089] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.321135] system 00:01: [io 0x10c0-0x1141] has been reserved[ 0.321137] system 00:01: [io 0xb044-0xb047] has been reserved[ 0.321139] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.321184] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)[ 0.321225] system 00:03: [io 0x08a0-0x08a3] has been reserved[ 0.321227] system 00:03: [io 0x0cc0-0x0ccf] has been reserved[ 0.321229] system 00:03: [io 0x04d0-0x04d1] has been reserved[ 0.321231] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.321241] pnp 00:04: [dma 4][ 0.321253] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)[ 0.321275] xen: --> pirq=16 -> irq=8 (gsi=8)[ 0.321290] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)[ 0.321309] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)[ 0.321327] xen: --> pirq=17 -> irq=12 (gsi=12)[ 0.321342] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)[ 0.321359] xen: --> pirq=18 -> irq=1 (gsi=1)[ 0.321372] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)[ 0.321388] xen: --> pirq=19 -> irq=6 (gsi=6)[ 0.321390] pnp 00:09: [dma 2][ 0.321407] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)[ 0.321428] xen: --> pirq=20 -> irq=4 (gsi=4)[ 0.321441] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)[ 0.321468] xen: --> pirq=21 -> irq=7 (gsi=7)[ 0.321484] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)[ 0.342349] pnp: PnP ACPI: found 12 devices[ 0.342355] ACPI: bus type PNP unregistered[ 0.350167] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7][ 0.350171] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff][ 0.350172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff][ 0.350174] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff][ 0.350213] NET: Registered protocol family 2[ 0.350371] TCP established hash table entries: 16384 (order: 5, 131072 bytes)[ 0.350413] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)[ 0.350446] TCP: Hash tables configured (established 16384 bind 16384)[ 0.350480] TCP: reno registered[ 0.350487] UDP hash table entries: 1024 (order: 3, 32768 bytes)[ 0.350497] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)[ 0.350578] NET: Registered protocol family 1[ 0.350588] pci 0000:00:00.0: Limiting direct PCI/PCI transfers[ 0.350643] pci 0000:00:01.0: PIIX3: Enabling Passive Release[ 0.350689] pci 0000:00:01.0: Activating ISA DMA hang workarounds[ 0.351002] xen: --> pirq=22 -> irq=23 (gsi=23)[ 0.351622] pci 0000:00:02.0: Boot video device[ 0.351671] PCI: CLS 0 bytes, default 64[ 0.351758] Trying to unpack rootfs image as initramfs...[ 0.714738] Freeing initrd memory: 23132K (ffff8800352c2000 - ffff880036959000)[ 0.714988] microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70d[ 0.715013] microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70d[ 0.715152] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba[ 0.715156] Scanning for low memory corruption every 60 seconds[ 0.715757] Initialise system trusted keyring[ 0.715824] audit: initializing netlink socket (disabled)[ 0.715845] type=2000 audit(1399571757.684:1): initialized[ 0.740434] HugeTLB registered 2 MB page size, pre-allocated 0 pages[ 0.741572] VFS: Disk quotas dquot_6.5.2[ 0.741617] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.742061] fuse init (API version 7.22)[ 0.742117] msgmni has been set to 3987[ 0.742169] Key type big_key registered[ 0.742983] Key type asymmetric registered[ 0.742985] Asymmetric key parser 'x509' registered[ 0.743012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)[ 0.743073] io scheduler noop registered[ 0.743075] io scheduler deadline registered (default)[ 0.743098] io scheduler cfq registered[ 0.743162] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[ 0.743174] pciehp: PCI Express Hot Plug Controller Driver version: 0.4[ 0.743212] efifb: probing for efifb[ 0.743290] efifb: framebuffer at 0xf0000000, mapped to 0xffffc90000400000, using 1408k, total 1408k[ 0.743292] efifb: mode is 800x600x24, linelength=2400, pages=1[ 0.743292] efifb: scrolling: redraw[ 0.743294] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0[ 0.745147] Console: switching to colour frame buffer device 100x37[ 0.746907] fb0: EFI VGA frame buffer device[ 0.746920] intel_idle: does not run on family 6 model 45[ 0.746926] ipmi message handler version 39.2[ 0.746978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0[ 0.746983] ACPI: Power Button [PWRF][ 0.747019] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1[ 0.747022] ACPI: Sleep Button [SLPF][ 0.747120] GHES: HEST is not enabled![ 0.747496] xen: --> pirq=23 -> irq=30 (gsi=30)[ 0.747624] xen:grant_table: Grant tables using version 1 layout[ 0.747650] Grant table initialized[ 0.747698] Cannot get hvm parameter CONSOLE_EVTCHN (18): -22![ 0.747700] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled[ 0.777869] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A[ 0.779331] Linux agpgart interface v0.103[ 0.780969] brd: module loaded[ 0.781778] loop: module loaded[ 0.787475] ata_piix 0000:00:01.1: version 2.13[ 0.789278] blkfront: xvde: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;[ 0.789319] scsi0 : ata_piix[ 0.789467] scsi1 : ata_piix[ 0.789517] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc620 irq 14[ 0.789519] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc628 irq 15[ 0.789965] libphy: Fixed MDIO Bus: probed[ 0.790089] tun: Universal TUN/TAP device driver, 1.6[ 0.790091] tun: (C) 1999-2004 Max Krasnyansky <ma...@qualcomm.com>[ 0.790770] PPP generic driver version 2.4.2[ 0.791617] xen_netfront: Initialising Xen virtual ethernet driver[ 0.793195] xvde: unknown partition table[ 0.794488] blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;[ 0.795931] xvda: xvda1[ 0.816685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 0.816699] ehci-pci: EHCI PCI platform driver[ 0.816733] ehci-platform: EHCI generic platform driver[ 0.816750] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 0.816752] ohci-pci: OHCI PCI platform driver[ 0.816758] ohci-platform: OHCI generic platform driver[ 0.816763] uhci_hcd: USB Universal Host Controller Interface driver[ 0.817323] uhci_hcd 0000:00:01.2: UHCI Host Controller[ 0.817330] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1[ 0.817701] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c600[ 0.818117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001[ 0.818119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.818125] usb usb1: Product: UHCI Host Controller[ 0.818127] usb usb1: Manufacturer: Linux 3.13.0-24-generic uhci_hcd[ 0.818129] usb usb1: SerialNumber: 0000:00:01.2[ 0.818351] hub 1-0:1.0: USB hub found[ 0.818373] hub 1-0:1.0: 2 ports detected[ 0.818765] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12[ 0.820803] serio: i8042 KBD port at 0x60,0x64 irq 1[ 0.820811] serio: i8042 AUX port at 0x60,0x64 irq 12[ 0.821026] mousedev: PS/2 mouse device common for all mice[ 0.822003] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2[ 0.822610] rtc_cmos 00:05: RTC can wake from S4[ 0.822764] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0[ 0.822809] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs[ 0.822926] device-mapper: uevent: version 1.0.3[ 0.823015] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-d...@redhat.com[ 0.823026] ledtrig-cpu: registered to indicate activity on CPUs[ 0.823119] TCP: cubic registered[ 0.823210] NET: Registered protocol family 10[ 0.823552] NET: Registered protocol family 17[ 0.823566] Key type dns_resolver registered[ 0.823906] Loading compiled-in X.509 certificates[ 0.824880] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'[ 0.824929] registered taskstats version 1[ 0.828351] Key type trusted registered[ 0.831495] Key type encrypted registered[ 0.833552] AppArmor: AppArmor sha1 policy hashing enabled[ 0.833556] IMA: No TPM chip found, activating TPM-bypass![ 0.833811] regulator-dummy: disabling[ 0.833874] Magic number: 14:288:946[ 0.833914] tty tty3: hash matches[ 0.833931] processor cpu1: hash matches[ 0.833972] rtc_cmos 00:05: setting system clock to 2014-05-08 17:55:57 UTC (1399571757)[ 0.834061] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[ 0.834063] EDD information not available.[ 0.834084] PM: Hibernation image not present or could not be loaded.[ 0.947124] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)[ 0.947129] Write protecting the kernel read-only data: 12288k[ 0.949510] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)[ 0.951192] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)[ 0.970553] systemd-udevd[132]: starting version 204[ 1.010652] FDC 0 is a S82078B[ 1.128140] usb 1-2: new full-speed USB device number 2 using uhci_hcd[ 1.712141] tsc: Refined TSC clocksource calibration: 2599.999 MHz[ 1.882836] usb 1-2: New USB device found, idVendor=0627, idProduct=0001[ 1.882841] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.882843] usb 1-2: Product: QEMU USB Tablet[ 1.882845] usb 1-2: Manufacturer: QEMU 0.10.2[ 1.882847] usb 1-2: SerialNumber: 1[ 2.111313] hidraw: raw HID events driver (C) Jiri Kosina[ 2.315765] usbcore: registered new interface driver usbhid[ 2.315769] usbhid: USB HID core driver[ 2.317793] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4[ 2.318518] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0[ 2.405606] EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)[ 2.550852] random: init urandom read with 91 bits of entropy available[ 2.776489] EXT4-fs (xvda1): re-mounted. Opts: errors=remount-ro,barrier=0[ 2.847243] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[ 2.847250] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready[ 2.847255] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready[ 2.847259] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready[ 2.847263] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready[ 2.903624] systemd-udevd[412]: starting version 204[ 2.968105] random: nonblocking pool is initialized[ 3.007558] lp: driver loaded but no devices found[ 3.015282] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr[ 3.038816] parport_pc 00:0b: reported by Plug and Play ACPI[ 3.039409] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE][ 3.137203] lp0: using parport0 (interrupt-driven).[ 3.192961] type=1400 audit(1399571759.857:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=481 comm="apparmor_parser"[ 3.192968] type=1400 audit(1399571759.857:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"[ 3.192973] type=1400 audit(1399571759.857:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"[ 3.193390] type=1400 audit(1399571759.857:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"[ 3.193396] type=1400 audit(1399571759.857:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"[ 3.193607] type=1400 audit(1399571759.857:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"[ 3.194357] type=1400 audit(1399571759.857:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=480 comm="apparmor_parser"[ 3.194362] type=1400 audit(1399571759.857:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"[ 3.194366] type=1400 audit(1399571759.857:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"[ 3.382361] ppdev: user-space parallel port driver[ 4.116601] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5[ 4.377746] ip_tables: (C) 2000-2006 Netfilter Core Team[ 4.383849] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 6.326076] init: udev-fallback-graphics main process (796) terminated with status 1[ 19.585773] init: failsafe main process (1090) killed by TERM signal[ 19.726953] aufs 3.13-20140303[ 19.761710] Bridge firewalling registered[ 19.897894] audit_printk_skb: 63 callbacks suppressed[ 19.897898] type=1400 audit(1399571776.895:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1314 comm="apparmor_parser"[ 19.897906] type=1400 audit(1399571776.895:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1314 comm="apparmor_parser"[ 19.897911] type=1400 audit(1399571776.895:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1314 comm="apparmor_parser"[ 19.898324] type=1400 audit(1399571776.895:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1314 comm="apparmor_parser"[ 19.898328] type=1400 audit(1399571776.895:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1314 comm="apparmor_parser"[ 19.898541] type=1400 audit(1399571776.895:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1314 comm="apparmor_parser"[ 19.904220] type=1400 audit(1399571776.903:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1313 comm="apparmor_parser"[ 19.917021] type=1400 audit(1399571776.915:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1316 comm="apparmor_parser"[ 20.230581] cgroup: systemd-logind (1163) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.[ 20.230586] cgroup: "memory" requires setting use_hierarchy to 1 on the root.[ 21.261815] bio: create slab <bio-1> at 1[ 21.418181] bio: create slab <bio-1> at 1[ 21.479114] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled[ 21.483483] XFS (dm-0): Mounting Filesystem[ 21.518746] XFS (dm-0): Ending clean mount[ 21.636897] init: plymouth-upstart-bridge main process ended, respawning[ 40.484326] init: docker.io main process (1145) killed by TERM signal[ 44.498683] netlink: 1 bytes leftover after parsing attributes.[ 44.499409] IPv6: ADDRCONF(NETDEV_UP): vethe5ad: link is not ready[ 44.499414] device vethe5ad entered promiscuous mode[ 44.499458] docker0: port 1(vethe5ad) entered forwarding state[ 44.499463] docker0: port 1(vethe5ad) entered forwarding state[ 44.500232] docker0: port 1(vethe5ad) entered disabled state[ 44.521918] IPv6: ADDRCONF(NETDEV_CHANGE): vethe5ad: link becomes ready[ 44.521956] docker0: port 1(vethe5ad) entered forwarding state[ 44.521962] docker0: port 1(vethe5ad) entered forwarding state[ 59.552079] docker0: port 1(vethe5ad) entered forwarding state[ 246.668393] docker0: port 1(vethe5ad) entered disabled state[ 246.668681] device vethe5ad left promiscuous mode[ 246.668687] docker0: port 1(vethe5ad) entered disabled state[ 257.798882] init: docker.io main process (1708) killed by TERM signal[ 257.818832] init: networking post-stop process (2090) terminated with status 100[ 302.143934] netlink: 1 bytes leftover after parsing attributes.[ 302.153213] IPv6: ADDRCONF(NETDEV_UP): vetha16d: link is not ready[ 302.153220] device vetha16d entered promiscuous mode[ 302.172825] IPv6: ADDRCONF(NETDEV_CHANGE): vetha16d: link becomes ready[ 302.172881] docker0: port 1(vetha16d) entered forwarding state[ 302.172889] docker0: port 1(vetha16d) entered forwarding state[ 317.216083] docker0: port 1(vetha16d) entered forwarding state[ 532.290303] type=1400 audit(1399572289.290:40): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291063] type=1400 audit(1399572289.290:41): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291079] type=1400 audit(1399572289.290:42): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291102] type=1400 audit(1399572289.290:43): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291193] type=1400 audit(1399572289.290:44): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291223] type=1400 audit(1399572289.290:45): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291306] type=1400 audit(1399572289.290:46): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291320] type=1400 audit(1399572289.290:47): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 532.291339] type=1400 audit(1399572289.290:48): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="trace" denied_mask="trace" peer="docker-default"[ 532.291421] type=1400 audit(1399572289.290:49): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=2785 comm="ps" requested_mask="read" denied_mask="read" peer="docker-default"[ 1018.216331] docker0: port 1(vetha16d) entered disabled state[ 1018.216618] device vetha16d left promiscuous mode[ 1018.216624] docker0: port 1(vetha16d) entered disabled state[ 1443.719130] nr_pdflush_threads exported in /proc is scheduled for removal[ 1443.719290] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linu...@kvack.org.[91251.997208] ip6_tables: (C) 2000-2006 Netfilter Core Team[99962.143660] init: docker.io main process (2127) killed by TERM signal[350728.028438] netlink: 1 bytes leftover after parsing attributes.[350728.036435] IPv6: ADDRCONF(NETDEV_UP): vethfe48: link is not ready[350728.036444] device vethfe48 entered promiscuous mode[350728.052931] IPv6: ADDRCONF(NETDEV_CHANGE): vethfe48: link becomes ready[350728.052965] docker0: port 1(vethfe48) entered forwarding state[350728.052971] docker0: port 1(vethfe48) entered forwarding state[350733.180420] docker0: port 1(vethfe48) entered disabled state[350733.180717] device vethfe48 left promiscuous mode[350733.180725] docker0: port 1(vethfe48) entered disabled state[350747.602228] netlink: 1 bytes leftover after parsing attributes.[350747.619569] IPv6: ADDRCONF(NETDEV_UP): vethb255: link is not ready[350747.619578] device vethb255 entered promiscuous mode[350747.640883] IPv6: ADDRCONF(NETDEV_CHANGE): vethb255: link becomes ready[350747.640915] docker0: port 1(vethb255) entered forwarding state[350747.640921] docker0: port 1(vethb255) entered forwarding state[350762.656096] docker0: port 1(vethb255) entered forwarding state[350766.908356] docker0: port 1(vethb255) entered disabled state[350766.908655] device vethb255 left promiscuous mode[350766.908661] docker0: port 1(vethb255) entered disabled state[350791.634825] netlink: 1 bytes leftover after parsing attributes.[350791.641405] IPv6: ADDRCONF(NETDEV_UP): vethb3b8: link is not ready[350791.641411] device vethb3b8 entered promiscuous mode[350791.660898] IPv6: ADDRCONF(NETDEV_CHANGE): vethb3b8: link becomes ready[350791.660931] docker0: port 1(vethb3b8) entered forwarding state[350791.660937] docker0: port 1(vethb3b8) entered forwarding state[350796.680346] docker0: port 1(vethb3b8) entered disabled state[350796.680619] device vethb3b8 left promiscuous mode[350796.680625] docker0: port 1(vethb3b8) entered disabled state[352734.883155] netlink: 1 bytes leftover after parsing attributes.[352734.891493] IPv6: ADDRCONF(NETDEV_UP): veth3cb4: link is not ready[352734.891501] device veth3cb4 entered promiscuous mode[352734.916458] IPv6: ADDRCONF(NETDEV_CHANGE): veth3cb4: link becomes ready[352734.916494] docker0: port 1(veth3cb4) entered forwarding state[352734.916499] docker0: port 1(veth3cb4) entered forwarding state[352749.920073] docker0: port 1(veth3cb4) entered forwarding state[352893.964324] docker0: port 1(veth3cb4) entered disabled state[352893.964664] device veth3cb4 left promiscuous mode[352893.964671] docker0: port 1(veth3cb4) entered disabled state[352946.621321] netlink: 1 bytes leftover after parsing attributes.[352946.622977] IPv6: ADDRCONF(NETDEV_UP): veth771a: link is not ready[352946.622984] device veth771a entered promiscuous mode[352946.644369] IPv6: ADDRCONF(NETDEV_CHANGE): veth771a: link becomes ready[352946.644402] docker0: port 1(veth771a) entered forwarding state[352946.644408] docker0: port 1(veth771a) entered forwarding state[352961.696091] docker0: port 1(veth771a) entered forwarding state[353043.255536] netlink: 1 bytes leftover after parsing attributes.[353043.258769] IPv6: ADDRCONF(NETDEV_UP): veth2b06: link is not ready[353043.258777] device veth2b06 entered promiscuous mode[353043.277202] IPv6: ADDRCONF(NETDEV_CHANGE): veth2b06: link becomes ready[353043.277254] docker0: port 2(veth2b06) entered forwarding state[353043.277261] docker0: port 2(veth2b06) entered forwarding state[353051.615169] netlink: 1 bytes leftover after parsing attributes.[353051.616252] IPv6: ADDRCONF(NETDEV_UP): vethfa19: link is not ready[353051.616259] device vethfa19 entered promiscuous mode[353051.641109] IPv6: ADDRCONF(NETDEV_CHANGE): vethfa19: link becomes ready[353051.641154] docker0: port 3(vethfa19) entered forwarding state[353051.641160] docker0: port 3(vethfa19) entered forwarding state[353058.304103] docker0: port 2(veth2b06) entered forwarding state[353066.656116] docker0: port 3(vethfa19) entered forwarding state[353464.040088] device docker0 entered promiscuous mode[353494.025462] device docker0 left promiscuous mode[353504.160133] device eth1 entered promiscuous mode[353510.570033] device eth1 left promiscuous mode[353515.744123] device eth1 entered promiscuous mode[353521.026072] device eth1 left promiscuous mode[353571.996084] device docker0 entered promiscuous mode[353574.482487] device docker0 left promiscuous mode[353578.384085] device eth1 entered promiscuous mode[353582.506654] device eth1 left promiscuous mode[353732.984289] docker0: port 3(vethfa19) entered disabled state[353732.984647] device vethfa19 left promiscuous mode[353732.984654] docker0: port 3(vethfa19) entered disabled state[353743.763295] netlink: 1 bytes leftover after parsing attributes.[353743.770368] IPv6: ADDRCONF(NETDEV_UP): vethc054: link is not ready[353743.770376] device vethc054 entered promiscuous mode[353743.792839] IPv6: ADDRCONF(NETDEV_CHANGE): vethc054: link becomes ready[353743.792876] docker0: port 3(vethc054) entered forwarding state[353743.792882] docker0: port 3(vethc054) entered forwarding state[353758.816091] docker0: port 3(vethc054) entered forwarding state[353779.568506] docker0: port 3(vethc054) entered disabled state[353779.568811] device vethc054 left promiscuous mode[353779.568818] docker0: port 3(vethc054) entered disabled state[354691.965063] netlink: 1 bytes leftover after parsing attributes.[354691.968537] IPv6: ADDRCONF(NETDEV_UP): veth4a85: link is not ready[354691.968544] device veth4a85 entered promiscuous mode[354691.988547] IPv6: ADDRCONF(NETDEV_CHANGE): veth4a85: link becomes ready[354691.988581] docker0: port 3(veth4a85) entered forwarding state[354691.988586] docker0: port 3(veth4a85) entered forwarding state[354699.044401] docker0: port 3(veth4a85) entered disabled state[354699.044765] device veth4a85 left promiscuous mode[354699.044772] docker0: port 3(veth4a85) entered disabled state[354708.553361] netlink: 1 bytes leftover after parsing attributes.[354708.558794] IPv6: ADDRCONF(NETDEV_UP): vethdc66: link is not ready[354708.558801] device vethdc66 entered promiscuous mode[354708.580402] IPv6: ADDRCONF(NETDEV_CHANGE): vethdc66: link becomes ready[354708.580451] docker0: port 3(vethdc66) entered forwarding state[354708.580458] docker0: port 3(vethdc66) entered forwarding state[354723.616095] docker0: port 3(vethdc66) entered forwarding state[357615.876554] docker0: port 3(vethdc66) entered disabled state[357615.876847] device vethdc66 left promiscuous mode[357615.876853] docker0: port 3(vethdc66) entered disabled state[357625.080207] netlink: 1 bytes leftover after parsing attributes.[357625.095823] IPv6: ADDRCONF(NETDEV_UP): veth8a95: link is not ready[357625.095831] device veth8a95 entered promiscuous mode[357625.128885] IPv6: ADDRCONF(NETDEV_CHANGE): veth8a95: link becomes ready[357625.128923] docker0: port 3(veth8a95) entered forwarding state[357625.128940] docker0: port 3(veth8a95) entered forwarding state[357640.160091] docker0: port 3(veth8a95) entered forwarding state[357747.176381] docker0: port 3(veth8a95) entered disabled state[357747.176843] device veth8a95 left promiscuous mode[357747.176850] docker0: port 3(veth8a95) entered disabled state[363089.576995] netlink: 1 bytes leftover after parsing attributes.[363089.577974] IPv6: ADDRCONF(NETDEV_UP): veth9eb7: link is not ready[363089.577980] device veth9eb7 entered promiscuous mode[363089.604451] IPv6: ADDRCONF(NETDEV_CHANGE): veth9eb7: link becomes ready[363089.604488] docker0: port 3(veth9eb7) entered forwarding state[363089.604494] docker0: port 3(veth9eb7) entered forwarding state[363093.896366] docker0: port 3(veth9eb7) entered disabled state[363093.896713] device veth9eb7 left promiscuous mode[363093.896720] docker0: port 3(veth9eb7) entered disabled state
Brandon Philips
May 13, 2014, 1:09:25 PM5/13/14
to Brian Lewis, coreo...@googlegroups.com
On Mon, May 12, 2014 at 4:05 PM, Brian Lewis <b...@catalyze.io> wrote:
> What essentially happens is - the container works fine, then network dies
> completely. You can't ping from the bridge (docker0) to the interface
> (eth1). The crazy part is - it doesn't die until ~24 hours. Previously, on
> Ubuntu 12.04 we could fix this by restarting networking and restarting the
> docker service. Restarting networking is no longer required, however,
> restarting the docker service DOES seem to fix this.
This is very odd. Can you reproduce faster by simply doing a tcpdump?
> What essentially happens is - the container works fine, then network dies
> completely. You can't ping from the bridge (docker0) to the interface
> (eth1). The crazy part is - it doesn't die until ~24 hours. Previously, on
> Ubuntu 12.04 we could fix this by restarting networking and restarting the
> docker service. Restarting networking is no longer required, however,
> restarting the docker service DOES seem to fix this.
This will enable promisc mode and tell you if it is the root cause.
Reply all
Reply to author
Forward
0 new messages