Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Reports in Paradox 7

2 views
Skip to first unread message

John M. Keigher

unread,
Sep 3, 2004, 10:30:57 AM9/3/04
to corel.wpoffice.paradox-old_version

We have reports that keep expanding off of the page. These reports are
table frames. As the reports keep printing the information continues to
move off of the page on the right hand side.

Any suggestions?

Jim Giner

unread,
Sep 3, 2004, 11:31:22 AM9/3/04
to corel.wpoffice.paradox-old_version

Do you mean that a series of pages in single print job seem to be moving to
the right on the paper, or that the width of the print image gets bigger on
a series of pages?
Or - do you mean that one print job has all of the pages 'bigger' than the
last printed version?

I'm not sure by what you may mean by "keep printing" - whether it happens
during one run, or across several runs.
"John M. Keigher" <john.k...@midwesttransit.com> wrote in message
news:41387a4a$1_2@cnews...

John M. Keigher

unread,
Sep 3, 2004, 11:44:13 AM9/3/04
to corel.wpoffice.paradox-old_version

Jim

The report data keeps moving off the right hand side of the page as the same
report keeps progressing. If the report is 200 pages. Pages 1-50 might be
fine and then all of the sudden page 51 might be missing some of the data
from the right hand side of the report. For example a number column on the
right hand side of the page, you would be able to see the full number with
decimals and as the report progresses the decimals numbers start to move off
of the right hand side of the report.


"Jim Giner" <gin...@sysadm.suny.edu> wrote in message
news:4138887b_1@cnews...

Bertil Isberg

unread,
Sep 3, 2004, 4:04:05 PM9/3/04
to corel.wpoffice.paradox-old_version

John

I have no notes on this problem in Paradox 7, only for Paradox 8 and 9.

--
Bertil Isberg - CTECH
Paradox buglist:
online: http://w1.826.comhem.se/~u82608896/
FAQ newsgroup: corel.wpoffice.paradox-faq

Jeff Shoaf

unread,
Sep 3, 2004, 7:04:01 PM9/3/04
to corel.wpoffice.paradox-old_version

I had this problem with large (> 200 pages) in Paradox 7. The only
solution I found was to print the report 150 to 200 pages at a time by
opening the report and display it on the monitor, then interactively
print pages 1 through 200, then pages 200 through 400, etc. The report
this most affected me on had a large tableframe.

I believe Paradox 8 fixed this problem, but then created a new bug where
you couldn't print reports that were over 1000 pages.

The only solution I found for the "wandering" tableframes was to migrate
to Paradox 9. Using P9, we've printed the same report (with over 1500
pages sometimes) w/o any problems except keeping the printer fed with paper.

0 new messages