Re: Rotating Objects - One goes in opposite direction

[Bart Cross]

I have a group of objects that rotate around a centre, the problem is that
one of the objects rotate in the opposite direction. Any thoughts on how
that happened.

--

Regards
Bart Cross

[lemoto]

Bart:

> I have a group of objects that rotate around a centre, the problem is that
> one of the objects rotate in the opposite direction.
>

I have seen a similar unwanted effect. The cause was that I had misread
matters while creating the sequence.
Of course this will not be the case in this instance <s>.
--
Good wishes!
Roy Lewis
To email: http://www.lemoto.myby.co.uk/relay.htm

[Bart Cross]

Well the object that goes in the opposite direction was an edit that I made
to create a separate object. I thought that maybe ungroup/regroup would
solve the problem but it only made it worse now there are three objects
going in the wrong direction.

When I press enter to play, the objects may or may not appear and it is
totally bizarre behaviour for a preview. I have a dual PIII 1Ghz machine
with 2GB of RAM, scads of free space, Matrox G550 with dual 21" monitors
running under WIN2K. Using Premiere 6/Flash MX and this does not happen.

Just be happy if the objects in this group were all going in the same
direction as it originally did in the first place.

Anyone?

Regards
Bart Cross
--

Regards
Bart Cross

"Bart Cross" <bart....@sympatico.ca> wrote in message
news:41333f8a$1_2@cnews...

[Bart Cross]

So, it seems that all the objects going in one direction had a rotation of
some kind (180 degrees), the ones going in the opposite direction were at 0
degrees, I changed those ones to -0.01 and all is now well. Hopefully this
will not happen again.

--

Regards
Bart Cross

"Bart Cross" <bart....@sympatico.ca> wrote in message

news:41348916$1_2@cnews...