Flexi Pro Wide

[Midas Souza]

TheFlexi Pro is essentially a heavy shoe but with untold flexibility for children. Years of experience led us to develop the first flexible shoe on the market. Wearing Flexi Pro means no blisters and virtually no breaking in time.

They come complete with the thunder tip and the Atlantic Brg heels. They also have the white Atlantic Brg shaped strap, which can be changed for boys or festival dancers if needed. These are without a doubt the best shoes on the market so far.

Please see our page on Flexi Pro for full fitting techniques. Please note that shoes which are purchased online are not guaranteed from splitting if the shoes have been fitted incorrectly or the wrong width purchased. Flexi pro come in Standard and Wide Fit so if you have a wide foot please try the correct width fitting. We can also supply Narrow as a special order.

Shoes will benefit from regular polishing to help keep the leather looking clean and new especially as tape can remove the upper coat of leather and leave the shoes looking scuffed. A good quality polish on a weekly basis will help with this.

Please remember that while following the guidance below will help you get the correct size, the foot is a three dimensional shape and factors such as the depth of the arch will also affect sizing which we are unable to account for here. As such the sizing guide is not a guarantee that the size will be correct. Customers will be responsible for the postage cost of any exchange.

On a general note, jig shoes should not be purchased too large as the ball of the foot needs to sit correctly in the shoe to be able to generate the required sound with the tips. Jig shoes which are too large also make toe walking and more advanced techniques very difficult. They also create more blisters than shoes which are too small. A little toe wiggle room is fine but the distance from the tip of the longest toe to the top of the shoe should be no more than 5-10mm (depending on the level of the dancer).

FLEXI-WELD 520 and 520-T are two-component, moisture insensitive, high strength 100% solids epoxy adhesives for general purpose bonding to a wide variety of substrates, including stone, masonry and dry or damp concrete.

FLEXI-WELD 520-T is a two-component, moisture insensitive, high strength 100% solids epoxy adhesive for general purpose bonding to a wide variety of substrates, including stone, masonry and dry or damp concrete. A-Paks are the ideal way to handle small jobs, or jobs requiring only small amounts of adhesive at one time. The premeasured two components are packaged in a plastic pouch, separated by a divider. To use, simply slip off the divider and squeeze the pouch to mix the components. Then cut open a corner to dispense. Packages of 8. Each A-Pak contains sufficient adhesive for a bead of adhesive approximately 36" in length.

FLEXI-WELD 520-T is a two-component, moisture insensitive, high strength 100% solids epoxy adhesive for general purpose bonding to a wide variety of substrates, including stone, masonry and dry or damp concrete. 200 ml dual-cartridges are designed for use with our double plunger dispensing guns (sold separately). Each cartridge includes a static mixer for instantaneous blending during application.

Extra dual mixing cartridge tips may be needed when there are delays in completing the use of a FLEXI-WELD 520-T or FLEXI-FILL 530 dual cartridge epoxy adhesives. FLEXI-WELD 520T/FLEXI-FILL 530 200 ml dual-cartridges are designed for use with these mixing tips for automatically dispensing mixed adhesive at the proper ratio.

Dual cartridge guns allow convenient, no-mix proportioning and application of FLEXI-WELD 520-T and FLEXI-FILL 530 two-component epoxy adhesives. FLEXI-WELD 520T/FLEXI-FILL 530 200 ml dual-cartridges are designed for use with these double plunger dispensing guns, automatically dispensing mixed adhesive at the proper 4:1 ratio. Manual guns are best for smaller projects with relatively low rates of dispensing. For faster dispensing and higher volumes use pneumatic guns.

Pneumatic dual cartridge guns allow convenient, quick, no-mix proportioning and application of FLEXI-WELD 520-T and FLEXI-FILL 530 two-component epoxy adhesives. FLEXI-WELD 520T/FLEXI-FILL 530 200 ml dual-cartridges are designed for use with these double plunger dispensing guns, automatically dispensing mixed adhesive at the proper 4:1 ratio. Requires compressed air source.

FLEXI-WELD 520-T is a two-component, moisture insensitive, high strength 100% solids epoxy adhesive for general purpose bonding to a wide variety of substrates, including stone, masonry and dry or damp concrete.

FLEXI-WELD 520 is a two-component, moisture insensitive, high strength 100% solids epoxy adhesive for crack injection in a wide variety of substrates, including stone, masonry and dry or damp concrete.

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. Edison Coatings, Inc. products are for commercial & industrial use only. Conditions of Sale

The 5-layer dressing absorbs, channels and traps exudate and also allows you to track progress.* It also keeps exudate containing bacteria away from the wound bed and minimizes re-entry, even under compression.

You can use Mepilex Border Flex to manage a wide range of moderate to highly exuding chronic and acute wounds such as diabetic foot ulcers, venous leg ulcers, pressure injuries, skin tears, and traumatic wounds. It can also aid in the prevention of non-sacrum and heel area pressure injuries when used as part of an individualized, comprehensive pressure injury prevention protocol.

Glides through knotty hair with ease. The thin, long flexible nylon bristles massage the scalp. The innovative brush design contours to scalp for extra comfort and helps minimise hair breakage. Can be used on wet or dry hair. Ideal for all hair types.

- Divide hair into small sections and starting at the ends, gently work your way up moving to the roots.

- With your head down, brush from the top of the neck in the direction towards the forehead to the roots.

- Finish by brushing once over from your forehead to ends.

Although we endeavor to make our web sites work with a wide variety of browsers, we can only support browsers that provide sufficiently modern support for web standards. Thus, this site requires the use of reasonably up-to-date versions of Google Chrome, FireFox, Internet Explorer (IE 9 or greater), or Safari (5 or greater). If you are experiencing trouble with the web site, please try one of these alternative browsers. If you need further assistance, you may write to he...@aps.org.

Copyright: 2009 Howie et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Funding: This study makes use of data generated by the Wellcome Trust Case Control Consortium. A full list of the investigators who contributed to the generation of the data is available from www.wtccc.org.uk. Funding for the project was provided by the Wellcome Trust under award 076113. This research was supported by funding and grants from the Wellcome Trust (PD), The Wolfson Foundation (PD), and a Wolfson-Royal Society Merit Award (PD). BNH was funded by a National Science Foundation Graduate Research Fellowship and the Overseas Research Students Awards Scheme. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

We have developed a new algorithm that seeks to improve imputation accuracy at untyped SNPs by improving phasing accuracy at typed SNPs, building on the points raised above. Most HMM-based imputation methods simultaneously estimate missing genotypes and analytically integrate over the unknown phase of SNPs in T. By contrast, we propose to alternately estimate haplotypes at SNPs in T and impute alleles at SNPs in U, assuming the haplotype guesses are correct. We account for the phasing uncertainty in the data by iterating these steps in a Markov chain Monte Carlo (MCMC) framework. Separating the phasing and imputation steps allows us to focus more computational effort on phasing and use more of the available information; the extra computation used in this step is largely balanced by the quick haploid imputation in the step that follows.

3a8082e126