pattcla dawnetta footprints

0 views

Skip to first unread message

Cortney Ruic

unread,

Aug 2, 2024, 11:47:17 PM8/2/24

to conraseda

I was in my way to upgrade my PA-460 from the version 10.2.3-h9 to 11.2.0, i tried to use the Validate button, to take a look at the upgrade path, but i can't see any result, but i still have my doubts,

I'm not sure if you can go straight from 10.2.X to 11.2.X, that said with 11.2.0 being newly released is there a particular reason why you're going to 11.2.0? The code is probably no where near ready for a production deployment.

Hi, I pay mthly for my Dropbox but recently ran out of space, I am having a really hard time trying to upgrade my account via google play store as that is where i originally downloaded dropbox, when i log into dropbox on my laptop it tells me that i need to upgrade via google play store. if someone could give me clear instructions on how do i upgrade my account for more space. Thank you

Did this post help you? If so, give it a Like below to let us know.
Need help with something else? Ask me a question!
Find Tips & Tricks Discover more ways to use Dropbox here!
Interested in Community Groups? Click here to join!

I might be mistaken but I dont think you can run mismatching versions in a VC in any circumstance, so you'd need to upgrade both members for them to form a VC again.
So you'd need to upgrade and reboot both members (and while ISSU is a thing, unless you really need to, I wouldnt really recommend that for upgrades typically, and especially with such big version leaps you'll probably want to be careful and test beforehand).

As for the "3 versions", while that is not a thing anymore, it is referring to main releases (so the "13" in 13.2X51-D26.2 for example could then upgrade to a 16.x version).
So your 18.2R3.4 could safely upgrade to anything up to a 21.x release following the "3 releases" logic. While it is no longer a requirement, there is always a question of how much changed and how big is the risk of things breaking, so I would highly recommend testing the upgrade path in a lab environment to be sure, especially if you are jumping ahead more than 2-3 main releases.

So in conclusion, while technically it might no longer be a thing, and it was never a hard law, I would recommend being very careful with version leaps that go over 3 main releases ahead in version and to be sure to test these beforehand. The (relatively) safe path is to upgrade to the last subrelease (typically x.4R3 or so) in your current train and then jump to the main release you want (20.4R3-S1, though I've heard S2 is coming out in a week or so, so depending on your need you might want to wait and take that one).

This path will take more time of course but if you're upgrading production it's probably better to be safe when doing these big version leaps.

Having said that, I think the risk is probably less pronounced with EX-series switches, due to a lesser complexity of features being available than in the MX routers for example, so the risk is probably relatively smaller there.

I have upgraded STM32CubeIDE to V1.15. It is asking me to upgrade the firmware in the ST-Link. Going through the upgrade process, it fails stating "Unexpected flash size for ST-Link micro. Don't know how to upgrade".

I have been having the same issues; since then a lot of my programs can't flash onto the board and the behaviour of the ST-LINK is very weird. When I open up a program on debugger during the rare-times it does work there is no uart output and some programs when I flash fail

It seems V1.15 has more problems, i was working on a project the upgrade was ready i closed the project and did the upgrade. Then went back to my project. Now i cannot download my code for debugging, getting some very odd error message. Screen shot attached. I can still connect to the hardware using STM32CubeProgrammer no problem.

We contacted the Google Workspace team and they helped us to make the transition to Business Standard, making us an offer which appeared in the reseller console. After this we closed the Starter plan.

when you are on fixed term plan (Yearly Payment plan), plan upgrade option is not available, since you already paid for annual term. This is the reason why your annual term plan domain is not showing upgrade option.

Your domain might not be converted yet to Pooled storage model, hence the mail box is not having more than 30GB, even after you provisioned storage to 60GB.

Pooled storage process is still going on and it may be implemented to your account as well any time soon. Similar issues are being faced by many since the implementation of pooled storage is still going on and it is taking time as the process should cover thousands of domains.

We just received a shipment of 5 new switches. They were all shipped with 9.2R3.5. That code did not accept the uplink module EX-UM-2X4SFP. So rather than ripping out the module to upgrade the code, we did it with a USB stick.

We have 3 Zoom Room's (2 using Yealink A20 video conferencing systems - bar and tablet), and the other is on a PC. The PC one is fine, but the 2 Yealink A20's both have the message pictured (and the subject of this post).

All are on the latest firmware and it will not let me do any meetings either between them or externally. Even if I just do 'Meet Now' with no invitees I get the error 'Some of your Zoom Rooms Devices need to be upgraded to join this meeting. Please contact IT for assistance'

We have a pretty simple setup - the G7500 with a single EagleEye IV camera. We get audio from an external mixer via the audio input (no mic), use an HDMI TV for video out, and control the room with an Android device. Our Android device is running Room Controller app version 5.14.5

Apparently we had some iPad devices that were still associated with each Room. Upgrading them is not an option for various reasons. We removed them completely from the Zoom account and are able to control the room from the Windows and Android apps now.

All five our Zoom Rooms melted down today. Three Windows PC rooms and two running Mac OS. All of the Rooms are running iPad controllers and iPad scheduling displays. I've literally been fixing these rooms for the past 5 hours now. I've upgraded everything upgradable (OS, apps, iPad IOS). Rebooted dozens of times. Signed devices out then re-activated. The rooms will work on the first couple of tests, then after roughly 20 minutes they can no longer join meetings. In the rooms with PCs, the desktop app crashes and to get it to work again I have to sign out, reboot the computer then re-activate. We've had these rooms for almost 4 years now, and although not perfect, they have never behaved this way. Someone at Zoom needs to address this and at the very least post a community bulletin because I'm about ready to ditch Zoom rooms entirely and look for some other solution. This is unacceptable.

I agree. I have the Pro version and it will not let me use the service because it says I need to update. I tried to update the software and it didn't work. This is really frustrating and embarrassing to a high tech company like Zoom.

For the two rooms running Mac OS, I've found they are stable (at least so far), but you have upgrade IOS on the controller and scheduler (if you're running one) as well as the Zoom apps. For the rooms running PC, currently the desktop app crashes every time I attempt to join a zoom meeting.

Following up as we were able to get this resolved today but it came down to our schedulers being out of the date. We had to get the iPads that we used as the scheduler connected to the app store -> download updated Zoom Room app -> sign it via activation code / paring key and that fixed our problems.

We use the iPads as schedulers but have the Poly x30 / Poly x50 and x80 paired with either a poly trio as the controller or a poly touch. For Poly's you have to visit the ip address of the appliance and controller and sign into the web based GUI to update it's firmware. You need to do that both for the appliance and controller. Once updated, sign them back into the ZoomRoom account. Then visit zoom.us -> admin -> Zoom Room -> find your Room -> you should have an update prompt for latest app version of the firmware for the appliance and controller.

@Anonymous are you able to help with this at all? We're paying hundreds of dollars to you and we cannot use the service we've paid for. This is a widespread issue it seems from this post and others and there is no direction on how to resolve this from you.

Anyway, we have a fleet of older Mac Minis talking to a variety of iPads. All the software appears to meet the minimum version requirements, but these older Mac Minis are slow and top out at Monterey so I may try buying a new Mac Mini to see what happens.