I2C Hackathon (22nd December '12)

[Anil Kumar Pugalia]

Hi Friends,
    Please fill up the participation sheet, if coming to the I2C Hackathon. Please note that you need to get any I2C device and your setup (laptop, etc) to hack it.

    Click here for the Participation Sheet (You need to be part the CCI mailing list to edit this)

Regards
Anil

-- 
Passion: http://sysplay.in (Playing with Systems)

[bharadwaj]

Hi all,
please resend the venue details it would be better the venue is listed in excel sheet too....

With regards
Bharadwaaj RA

--
 
 

[crond daemon]

On Wed, Dec 12, 2012 at 2:28 PM, bharadwaj <bhaar...@gmail.com> wrote:

Hi all,
please resend the venue details it would be better the venue is listed in excel sheet too....
 

if, in case you deleted the mail from this list, you can always track down from the archives here,

https://groups.google.com/forum/?fromgroups#!forum/computerclubin.

BTW, 

Address: SysPlay eLearning Academy
1st Floor, Shiva Parvathi Nilaya, 14th Cross
(Opp. Amma Bakery, Near Gayathri Temple)
Gayathri Layout, Basavanpura Main Road
Krishna Raj Puram (K R Puram)
Bangalore - 560036 

Map: http://maps.google.com/maps/ms?ie=UTF&msa=0&msid=216680650985846623047.0004c634b2c9aed73c8e3

 

[Sudar Muthu]

If we can build this I2C sniffer it would be useful as well http://en.radzio.dxp.pl/i2c-sniffer/

--
Sudar

http://SudarMuthu.com (@sudarmuthu)

http://HardwareFun.com (@hardwarefun)

--
 
 

[Sharath chandra]

got to check if Bus Pirate has been shipped to CIS as promised.

--
 
 

[Sharath chandra]

Anyone manage to get the spare ones Ian Lesnet was carrying with him?

[ankur sachan]

plz help regarding the ada language and mat lab learning

[crond daemon]

Hi,

On Tuesday, December 11, 2012 6:02:33 PM UTC+5:30, Anil Kumar Pugalia wrote:

Hi Friends,
    Please fill up the participation sheet, if coming to the I2C Hackathon. Please note that you need to get any I2C device and your setup (laptop, etc) to hack it.

 I was out of Bangalore for last 7 days due to some un-expected family event. Today,20/12/2012 morning only I reached BLR.

I had a plan of Interfacing Beagle Board and dsPIC33F using I2C. But, I dont think so, I will make it before 22/12/2012. 

A lot of work in pending state, like voltage level shifter for 1.8v-to-3.5v , etc. Basically , I do not have MC,MP which work in same operating voltage.

But, in coding, some 40% is done. And I will try to complete as much as I can, after my office time in remaining 2 days.

I like to share some theory that I know about I2C and  my partial setup.

I have plan  to get two ardino, but I think the shipping will happen before our event.

So, in short I do not have a working set of I2C.  And , now I have two questions,

1. Am I allowed to attend this event?

2. If I am allowed, is it possible for me  to buy a new LDDK on spot ? . Bcoz, I see, so many people are bringing LDDK to this event.At least I can follow them and try to do the same with mine to get familiar with I2C. 

Thanks,

[Anil Kumar Pugalia]

Cool - get your various stuff - and people around there might be able to help you out in hacking the hardware.

Regards
Anil

On 20 December 2012 12:38, crond daemon <crond...@gmail.com> wrote:

On Thu, Dec 20, 2012 at 12:17 PM, Anil Kumar Pugalia <em...@sarika-pugs.com> wrote:

Sure, you can buy the LDDK on the spot.

thanks a lot. I will proceed with the payment now and send the details. OMG,  I am very much excited ... I cant wait to see you in person. :)

 

But more than that, you could get your Beagle board setup, which you are right now exploring. Right?

 

yes. 

I have plenty of MC from PIC and ATMEL. The problem is, atleast not 2 are same. Almost are from different class from each other. Some are, I have 2 [dsPIC and Atmel chip ] . But, I dont have 2 base boards. :(.  I feel very friendly with Morse's Law. 

I am not good at forming circuit and making connection. Particularly, not with the voltage level shifters and all.  :( . 

But, once the setup is ready, I can make some minor changes in the connection and play with them with s/w.

And, moreover , as I said, I lost the context with my embedded self learning for last 20 days due to office and personal work.

In beagle board, I used the p[l]ain API for I2C. I am not at all happy. And , dont get a chance to verify.

In dsPIC, some what okey. I think I can finish either I2C Master or SLave. 

Trust me, API are making people lazy and hide the concepts. It gives me :( and :)

--

Passion: http://profession.sarika-pugs.com

[anushku...@gmail.com]

Hi I am new to this forum and wish to meet you guys at the I2C hackathon...
I have a simple PIC microcontroller which hopefully will be programmed by the 22/12...

[anushku...@gmail.com]

I am not sure if my post will appear in the forum yet as I just joined.
I have put my details in the participation list.
Hope I get accepted in this group... :)

[crond daemon]

Hi,

On Mon, Dec 17, 2012 at 8:50 PM, Sudar Muthu <su...@sudarmuthu.com> wrote:

If we can build this I2C sniffer it would be useful as well http://en.radzio.dxp.pl/i2c-sniffer/

 

this is very interesting.  we can try this with any I2C working set in the event. 

Thanks for sharing :)

[bharadwaj]

Hi all,
        A quick question how to reach the venue by bus from hebbal.

With regards
Bharadwaaj RA

--
 
 

[Anish]

Hi All , 

Not able to make it out for Tomorrows Hackathlon due to Emergency work  . I am going to miss it :( . 

I have updated the Excel sheet accordingly . 

Thanks,

Anish K

--
 
 

[crond daemon]

On Fri, Dec 21, 2012 at 11:59 AM, bharadwaj <bhaar...@gmail.com> wrote:

Hi all,
        A quick question how to reach the venue by bus from hebbal.

  

Catch a bus to K.R Puram . You can see, it is some what near to the place. May be from there you can make some query for the Temple near to the Academy.

[Raghavan Sreenivasa]

I can Help for this.


1) Start From Hebbal With Volvl Buses What ever The Number
2) Get Down at Tin Factory Stop.
3) go towards The flyover (not Below the Flyover) you will see people waiting for the buses.
4) Get into a Bus (317 series or any Bus Towards KRpuram Market or BUS stand)
5) This stop is Next stop after the Flyover end(oppsite to Hebbal) .You can see Market kind of environment around the stop where you get down.
6) You can see a Signal which is Junction for (2 double Roads and a single road).
7) Towards Your Right you can See POOJA COMPLEX
8) Take a Road which is ad-joining The Complex(land mark is:you can see small opening of dividor in opp site to the road you have to Take .
9) You take that Road.you will get a left (kind of) move as road goes.
10) As you pass you hit a Cement Road and also wall
11) Follow The Cement Road you can see colleges schools on the path.
12) you reach end of the cement road you will see a Drainage towards your left.
13) you will get kind of tar Road follow as it goes(400mts). you can see Amma Bekary towards your Right and see The Building Oppsite to It is the destination.


Land Marks IF you miss something : Gayatri Temple.

 
Raghavan.

--
 
 

[bharadwaj]

Dear Raghavan,

Thanks a lot...
i may have to print it out...

with regards
Bharadwaaj RA

[bharadwaj]

Dear all,
               My greatest apologies for not attending the hackathon. In the morning i got a call from office to report immediately to the office . I had no choice. Missed the session today..

With regards
Bharadwaaj RA

[Amarjit Singh]

Boys missing the things. :(

Regards,

Amarjit

--
 
 

--
Regards and Thanks,

Amarjit Singh