Strange messages on console from SAS-1.25-jma ?

[Bjoern Smith]

We have recently changed from SAS-1.25 to SAS-1.25-jma tty device driver.

Now we get the following messages on the console from device driver:

### 20063: sas_open f=00000003 d=00006250 pu=0 om=D,FC,HO,HI o_s=0
### 20063: sas get_device_lock sleep...
### 20063: sas get_device_lock awakened.
### 20063: sas_close dev=0x00006250 om=D,FC.HO,HI q_ptr[1]
### 20064: ... (same four lines over and over again)

Our environment is:
UnixWare 1.1 (upd 1.1.2)
One 4-port daisy chained interrupt
uugetty on device 0, 1, and 2
mouse device on 3 (driving XFree 3.1.1)

Another symptom is that when the X-server resets it hangs until I unplug
the mouse. Then I can plug it in again and it works.

In general all 4 ports works but there is something strange...

Is there anyone that has seen this before or can give me a hint of what
it could be, which of the 4 ports that provokes the message etc.

Many thanks in advance !

--
Bj|rn Smith Compound Systems AB, phone +46 8 7923689
Email: sm...@compound.se
URL: http://www.pi.se/compound/

[John LoSecco]

In article <3r14om$s...@news.pi.se>, sm...@compound.se (Bjoern Smith) writes:
|> We have recently changed from SAS-1.25 to SAS-1.25-jma tty device driver.
|>
|> Now we get the following messages on the console from device driver:
|>
|> ### 20063: sas_open f=00000003 d=00006250 pu=0 om=D,FC,HO,HI o_s=0
|> ### 20063: sas get_device_lock sleep...
|> ### 20063: sas get_device_lock awakened.
|> ### 20063: sas_close dev=0x00006250 om=D,FC.HO,HI q_ptr[1]
|> ### 20064: ... (same four lines over and over again)
|>

Recompile the SAS driver with the debugging turned off.

--
John M. LoSecco Phone:(219)631-6044 Fax:(219)631-5952
Physics Department HEPnet/SPAN: UNDHEP::LOSECCO or 47344::LOSECCO
University of Notre Dame Internet: los...@muon.hep.nd.edu
Notre Dame, Indiana 46556 USA