I am trying to get ps to display the full command running (including all
parameters). I gave up with the standard ps as this limits the display to
80 characters. I then discovered the version in /usr/ucb. This seems to
provide more details, but I am unable to find information on what each of
the options do (i.e. aceglnrSuUvwx [ -t term ] [num ]). Can anyone help me,
or point me to the appropriate documentation?
Thanks
Guy Fullalove
(guy.fu...@which.net)
The documentation of commands in /usr/ucb are generally in section 1B of
the manual, so: man -s1b ps
--
Barry Margolin, bar...@genuity.net
Genuity, Burlington, MA
*** DON'T SEND TECHNICAL QUESTIONS DIRECTLY TO ME, post them to newsgroups.
Please DON'T copy followups to me -- I'll assume it wasn't posted to the group.
That is one thing about Solaris that I don't like. I used to work with a
NCR UNIX SVR4 and when the man command was issued it would find both the
SVR4 and the UCB version of commands and display them sequentially -
made it a whole lot easier to see the UCB versions.
Kenneth C Stahl <Blu...@Unforgettable.com> writes:
>That is one thing about Solaris that I don't like. I used to work with a
>NCR UNIX SVR4 and when the man command was issued it would find both the
>SVR4 and the UCB version of commands and display them sequentially -
>made it a whole lot easier to see the UCB versions.
Try "man -a"; i will show all of them.
Casper
--
Expressed in this posting are my opinions. They are in no way related
to opinions held by my employer, Sun Microsystems.
Statements on Sun products included here are not gospel and may
be fiction rather than truth.
Solaris can do this as well:
% man -a ps
Hugh.
--
| Hugh McIntyre -- Hugh.M...@Eng.Sun.COM |
| CPU/SRAM Design, Microelectronics, Sun Microsystems, Inc. |
| Speaking for myself, not for Sun Microsystems. |