Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

V120 question

0 views
Skip to first unread message

任我行

unread,
Apr 16, 2003, 9:11:19 PM4/16/03
to
1. How can I set the 'TAB' function as linux (press tab key to display
the rest of the command)?

2. V120 has two 10/100BaseTX on board. Could I use them together to
archieve 200Mbps?

thanks

Rich Teer

unread,
Apr 19, 2003, 1:18:40 AM4/19/03
to
On Thu, 17 Apr 2003, 任我行 wrote:

> 1. How can I set the 'TAB' function as linux (press tab key to display
> the rest of the command)?

What makes you think that functionality is specific to Linux?
Hint: if you used the same shell, you'd get the same functionality...

> 2. V120 has two 10/100BaseTX on board. Could I use them together to
> archieve 200Mbps?

With the right software, yes. Although the intention is probably
to have a "service" network, and a public network (the service
network would be a private one that is attached to NFS and backup
servers, and the public one would be attached to the Internet).

--
Rich Teer, SCNA

President,
Rite Online Inc.

Voice: +1 (250) 979-1638
URL: http://www.rite-online.net

Unknown

unread,
Apr 19, 2003, 11:05:41 AM4/19/03
to
On Thu, 17 Apr 2003 09:11:19 +0800, "任我行" <任我行@freewalk.com>
wrote:

>1. How can I set the 'TAB' function as linux (press tab key to display
>the rest of the command)?

Use bash for your shell.

>2. V120 has two 10/100BaseTX on board. Could I use them together to
>archieve 200Mbps?

You can configure IP Network Multipathing. It can provide redundancy
and increased throughput for outbound traffic.

http://www.sun.com/solutions/blueprints/1102/806-7230.pdf

Regards,

Tom Hall

Rev. Don Kool

unread,
Apr 19, 2003, 11:58:53 AM4/19/03
to

Rich Teer wrote:
> 任我行 wrote:

>>1. How can I set the 'TAB' function as linux (press tab key to display
>>the rest of the command)?
>
>
> What makes you think that functionality is specific to Linux?
> Hint: if you used the same shell, you'd get the same functionality...

You mean like using "sh" on LINTEL and "sh" on a UNIX system? LOL!!

Hope this helps,
Don

--
*************************** Q: How many frenchmen does it take
* Rev. Don McDonald, SCNA * to defend Paris?
* Baltimore, MD * A: No one knows, it's never been tried.
***************************
http://mywebpages.comcast.net/oldno7/TheFrench.mpg
Reluctant Yamaha YZF-R1 Owner

Thomas H Jones II

unread,
Apr 21, 2003, 3:48:34 PM4/21/03
to
In article <b7kuvp$15...@rain.i-cable.com>, 任我行 <任我行@freewalk.com> wrote:
>1. How can I set the 'TAB' function as linux (press tab key to display
>the rest of the command)?

Linux uses BASH as the default shell. Change the account's shell to BASH
and you will achieve the same results.

>2. V120 has two 10/100BaseTX on board. Could I use them together to
>archieve 200Mbps?

You can use IP multipathing to increase throughput and connection
reliability. However, you likely won't see anything approaching 2X the
bandwidth due to limitations in the OS and switch software that supports
the functionality.

-tom


--

"You can only be -so- accurate with a claw-hammer." --me

0 new messages