Hi Brandon,
I've seen some funkiness with ipmitool in Solaris 11, fixed in a later
build.
The integrating CRs say that you must use the -I bmc option but you
seem
to have a different issue.
Could there be any conflict between your 2 versions? Did you
completely
uninstall the other version?
What does this output provide:
# modinfo | grep BMC
185 7bbbc000 2da8 13 1 bmc (BMC 1.13)
On my ORCL,SPARC-T3-4, I see this:
# /usr/sbin/ipmitool -I bmc power status
Chassis Power is on
You can see that I need to provide the -I bmc option, here:
# ipmitool sensor
Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0:
No such file or directory
Get Device ID command failed
Unable to open SDR for reading
# ipmitool -I bmc sensor
/SYS/T_AMB | 13.000 | degrees C | ok | na |
na | na | na | 45.000 | 50.000
MB/V_+1V0 | 1.049 | Volts | ok | 0.931 |
0.941 | 0.960 | 1.137 | 1.156 | 1.166
MB/V_+3V3 | 3.296 | Volts | ok | 2.945 |
3.042 | 3.062 | 3.530 | 3.569 | 3.666
MB/V_+3V3_FMOD | 3.296 | Volts | ok | 2.867 |
2.945 | 3.003 | 3.530 | 3.569 | 3.666
MB/V_+5V0_SBP0 | 4.992 | Volts | ok | 4.563 |
4.758 | 4.875 | 5.226 | 5.304 | 5.577
MB/V_+5V0_SBP1 | 4.992 | Volts | ok | 4.563 |
4.758 | 4.875 | 5.226 | 5.304 | 5.577
MB/V_+12V0 | 12.213 | Volts | ok | 10.797 |
11.387 | 11.505 | 12.508 | 12.626 | 13.216
MB/V_BAT | 3.120 | Volts | ok | na |
na | 2.516 | na | na | na
Thanks, Cindy