Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

??== AlphaStation 400 4/233 won't boot.

17 views
Skip to first unread message

Hans M. Aus

unread,
Aug 23, 2002, 4:03:51 AM8/23/02
to
AlphaStation 400 4/233 won't boot

The configuration of my new-to-me AlphaStation 400 4/233 is shown below.

1) When I try to boot either of the two disks the error message is:

>>>b dka0 (or dka100)
(boot dka0.0.0.6.0)
block 0 of dka0.0.0.6.0 is not a valid boot block
bootstrap failure

2) Booting from the dka400 (or external dka500) the boot gets as far as:

>>>b dka400
(boot dka400.4.0.6.0)
block 0 of dka400.4.0.6.0 is a valid boot block
reading 1082 blocks from dka400.4.0.6.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 87400
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

Then the CD drive lights flash a few times and everything dies. I've tried
booting the firmware 5.3 and 5.9 as well as OVMS 7.2-1 and 7.3 CDs.

The previous owner tells me that one of the two hard disks has OpenVMS
installed. I received the Alpha with the boot enabled for WinNT and
changed the boot console to boot OVMS.

What can I try now?

<<<<<<<<<<< Configuration >>>>>>>>>>>>>>>

Firmware
SRM Console: X5.0-30
ARC Console: 4.37
PALcode: VMS PALcode X5.48-107, OSF PALcode X1.35-76
Serial Rom: V4.6
Diag Rom: V1.2

Processor
DECchip (tm) 21064A-6 233Mhz 512KB Cache

MEMORY
64 Meg of System Memory
Bank 0 = 64 Mbytes(32 MB Per Simm) Starting at 0x0
Bank 1 = No Memory Detected
Bank 2 = No Memory Detected
Flash ROM0 Mfr - AMD
Flash ROM1 Mfr - AMD
Flash ROM2 Mfr - AMD
Flash ROM3 Mfr - AMD

PCI Bus
Bus 00 Slot 06: NCR 810 Scsi Controller
pka0.7.0.6.0 SCSI Bus ID 7
dka0.0.0.6.0 RZ28
dka100.1.0.6.0 RZ28
dka400.4.0.6.0 RRD43
dka500.5.0.6.0 RRD42

Bus 00 Slot 07: Intel SIO 82378


Bus 00 Slot 11: Digital ZLXp Graphics Controller

Bus 00 Slot 12: DECchip 21040 Network Controller
ewa0.0.0.12.0 08-00-2B-E5-EA-B7

ISA
Slot Device Name Type Enabled BaseAddr IRQ DMA
0
0 MOUSE Embedded Yes 60 12
1 KBD Embedded Yes 60 1
2 COM1 Embedded Yes 3f8 4
3 COM2 Embedded Yes 2f8 3
4 LPT1 Embedded Yes 3bc 7
5 FLOPPY Embedded Yes 3f0 6 2
2
0 PCXBJ Singleport Yes 530 9 0

--
Cheers, Hans M. Aus, Wuerzburg, Germany, a...@vim.uni-wuerzburg.de

Hans M. Aus

unread,
Aug 23, 2002, 8:09:45 AM8/23/02
to
I was connected to serial port_2; things work fine when connected to
serial port_1. :]
0 new messages