URGENT HELP NEEDED: SS IPX and Second Ethernet (X1053A)

[Pedro Miguel A. C. Raposo]

I have been trying to setup an X1053A (SBus Fast SCSI-2 and UTP
Ethernet) as
the primary interface, and the built-in (le0) as a secondary interface
(to
connect to a local network), using an AUI to BNC Transceiver.

I have been assigned the correct network numbers and hostid's, I
configured
both le0 and le1, routing tables, etc., and it just doesn't want to
work.

If anyone has ever had this or a similar problem, please send me any
pointers,
suggestions, etc.
Any help is welcome.

Thanks in advance,
*******************************************************************************
* Pedro Miguel Arruda da Costa Raposo * MAIL : INESC -
CTCSE *
* e-mail: pm...@ctcse.inesc.pt * Sala
106 *
* voice: +351 1 3100000 Ext. 2512 * Apartado
13069 *
* +351 1 3100394 * 1000
LISBOA *
* FAX: +351 1 3145843 *
PORTUGAL *
*******************************************************************************

[Davin Milun]

Pedro Miguel A. C. Raposo <pm...@ctcse.inesc.pt> wrote:
»I have been trying to setup an X1053A (SBus Fast SCSI-2 and UTP

»Ethernet) as
»the primary interface, and the built-in (le0) as a secondary interface
»(to connect to a local network), using an AUI to BNC Transceiver.
»
»I have been assigned the correct network numbers and hostid's, I configured
»both le0 and le1, routing tables, etc., and it just doesn't want to
»work.

You're going to need to tell us what was happenning.
In other words - more details are needed.
For example: does it boot; can it talk to either network; what is your
routing configuration; etc. etc. etc.

Davin.
--
Davin Milun Internet: mi...@cs.Buffalo.EDU
Fax: (716) 645-3464
WWW: http://www.cs.buffalo.edu/~milun/

[Pedro Miguel A. C. Raposo]

My problem is already solved: the cable between the hub to which my
machine
is connected and the patch?? was bad.

Thank you for your bandwidth,