Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Oricutron 0.9 Released!
36 views
Skip to first unread message
xeron
Mar 3, 2012, 11:57:10 AM3/3/12
to
I am happy to announce that Oricutron 0.9 has just been released. For
Oric-1 and Atmos, this version is now feature complete enough to be a
comprehensive replacement for Euphoric, for those that need one (not
that I aim to replace Euphoric, but this may be more comfortable for
people using platforms where they would otherwise have to run Euphoric
inside DOSBox).
Changes since 0.8:
- Now uses comes with appropriate icons for OS4, MorphOS and AROS.
- Audio sync problems fixed in AVI recordings
- Various optimisations to the display routines
- 6502 emulation now includes all illegal opcodes
- Now includes an option to emulate the 6502 at various clock speeds
from 1Mhz to 64Mhz (the rest of the hw is emulated at normal speed).
- Tape saving is now implemented. CSAVE/STORE will save to a standard
tap file. You can also capture all tape output to a new .ORT format,
which will record the actual output waveform from the tape port.
- Changes to disks are now automatically saved back to the disk image
file. The old behaviour can still be selected from the config file.
- Reformatted the VIA panel in the debugger (thanks to Twilighte for
the suggestion)
- Printer emulation now filters out non-ascii chars as a workaround
for the phantom printer output (this is temporary until a proper fix
is found)
- Added a PAL ghosting simulation to the GL renderer
- Switching between OpenGL and software rendering on the fly no longer
causes hang-on-exit problems.
- Added NMI, reset and IRQ vector display in thedebugger (thanks to
Twilighte for the suggestion!)
- Keyboard can now only be read when the AY direction register is set
up correctly (thanks to Chema for pointing this out).
- Added experimental snapshot functionality (use with caution!)
- The Oric lightpen is now emulated (thanks to Stefan Haubenthal for
his help)
Oric-1 and Atmos, this version is now feature complete enough to be a
comprehensive replacement for Euphoric, for those that need one (not
that I aim to replace Euphoric, but this may be more comfortable for
people using platforms where they would otherwise have to run Euphoric
inside DOSBox).
Changes since 0.8:
- Now uses comes with appropriate icons for OS4, MorphOS and AROS.
- Audio sync problems fixed in AVI recordings
- Various optimisations to the display routines
- 6502 emulation now includes all illegal opcodes
- Now includes an option to emulate the 6502 at various clock speeds
from 1Mhz to 64Mhz (the rest of the hw is emulated at normal speed).
- Tape saving is now implemented. CSAVE/STORE will save to a standard
tap file. You can also capture all tape output to a new .ORT format,
which will record the actual output waveform from the tape port.
- Changes to disks are now automatically saved back to the disk image
file. The old behaviour can still be selected from the config file.
- Reformatted the VIA panel in the debugger (thanks to Twilighte for
the suggestion)
- Printer emulation now filters out non-ascii chars as a workaround
for the phantom printer output (this is temporary until a proper fix
is found)
- Added a PAL ghosting simulation to the GL renderer
- Switching between OpenGL and software rendering on the fly no longer
causes hang-on-exit problems.
- Added NMI, reset and IRQ vector display in thedebugger (thanks to
Twilighte for the suggestion!)
- Keyboard can now only be read when the AY direction register is set
up correctly (thanks to Chema for pointing this out).
- Added experimental snapshot functionality (use with caution!)
- The Oric lightpen is now emulated (thanks to Stefan Haubenthal for
his help)
pe...@petergordon.org.uk
Mar 3, 2012, 2:00:45 PM3/3/12
to
sam coupe
May 27, 2012, 8:32:35 AM5/27/12
to
have you seen the rzx file format for zx spectrum emualtors it includes the program and the keypresses - you don't support anything similar for yours do you?
0 new messages