FW800 - SATA bridge?
Paul Conners
Minimum external interface is FW800. Can have SATA & USB also.
Looking for recommendation (not pages of Google results -- those I can get
myself).
Either a product you've had good results with or a hardware distributor
you've had good experience with.
Thanks.
Greg Buchner
<0001HW.CA8BB7E3...@news.eternal-september.org>,
Paul Conners <pconn...@gUSmail.com> wrote:
I've been using this bridgeboard...
> <http://www.datoptic.com/dual-sata-to-usb-1394a-b-with-oxuf934dsb-chipset.html>
...for over a year now. I currently have two 3TB HDs in a RAID-1
configuration hooked up to it.
It's designed to go right into a case that had the old Centronics 50-pin
SCSI connectors. Which is the type of case I used. Found one with a 1 GB
5.25" full height HD, so the power supply should be perfectly capable of
running two 3.5" HDs and the bridgeboard.
They have a similar model that supports SATA Port Multipliers so you
could easily hook up multiple drives if you had the right case.
Greg B.
--
Actual e-mail address is gregbuchner and I'm located at gmail.com
Erik Richard Sørensen
I myself only use enclosures from OWC - both single and dual bay from
the Mercury series, and have done this since 1998 without a single crash
or broken FW bridge. Two of them are running 24/7 as backup and have
done for years. Note, that there are enclosures for both IDE/ATA and
SATA disks.
http://eshop.macsales.com/item/OWC/MEP944FW8EU2/
http://eshop.macsales.com/item/OWC/MEQX2KIT0GB/
http://eshop.macsales.com/item/OWC/MEFW936AL2/
http://eshop.macsales.com/item/OWC/MEP944FWKSW/
etc.etc.... Just take a look here.
http://eshop.macsales.com/search/firewire+800+enclosure
Cheers, Erik Richard
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Erik Richard Sørensen, Member of ADC, <mac-m...@Mstofanet.dk>
NisusWriter - The Future In Multilingual Text Processing - www.nisus.com
OpenOffice.org - The Modern Productivity Solution - www.openoffice.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~