On 4/19/18 6:39 PM, Wade Garrett wrote:
> One of the two black plastic skids on the bottom of my Magic Mouse has
> popped off and I can't get it to snap back in. If it matters, it's the
> one on the same side as the on/off switch. I don't really see anything
> broken off from it or from the mouse itself.
>
> I can one end in and flush or the other- but not both. One end stick up
> so it's not parallel to the case bottom.
>
> Any suggestions to fix? I'd hate to shell out $80 for a new one!
>
Under magnification, I saw that the mouse-facing side of the rail has a
tiny perpendicular spud at one end and a slot at the other. These match
up with a corresponding spud/slot arrangement on the mouse body.
First I tried to just line them up and push on both ends of the rail but
the didn't work. Then I tried putting the rail spud into the mouse slot
first and then levering the other end-- the rail slot- over the mouse
spud but that wouldn't go either.
Finally I tried putting the rail slot over the mouse spud first and then
putting serious simultaneous thumb pressure on the rail spud at the
other end and they snapped back together fine.
Not having to shell out $80 for a new Magic Mouse now, I'm thinking I
can treat myself to a nice bottle of my favorite adult beverage.
--
Good people do not need laws to tell them to act responsibly, while bad
people will find a way around the laws.
- Plato