Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
USBGear serial adapter
3 views
Skip to first unread message
David Lesher
May 29, 2013, 9:55:24 PM5/29/13
to
So I picked up a "USBGear" serial adapter for my Handspring cradle.
<http://www.usbgear.com/USBG-232MINI.html>
I found the driver and installed it, but now what? I see no way to
set speed, stop bits, etc. I looked for a man page to no avail.
Grr....
--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close........[v].(301) 56-LINUX
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
<http://www.usbgear.com/USBG-232MINI.html>
I found the driver and installed it, but now what? I see no way to
set speed, stop bits, etc. I looked for a man page to no avail.
Grr....
--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close........[v].(301) 56-LINUX
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
isw
May 30, 2013, 12:42:34 AM5/30/13
to
In article <ko6bic$83o$1...@reader1.panix.com>,
data through it does that. You look in /dev to find out what the
interface is called (it'll have a name probably something like
"tty.usbserial-A6005vpP") and then point the app at it.
Isaac
David Lesher <wb8...@panix.com> wrote:
> So I picked up a "USBGear" serial adapter for my Handspring cradle.
> <http://www.usbgear.com/USBG-232MINI.html>
>
> I found the driver and installed it, but now what? I see no way to
> set speed, stop bits, etc. I looked for a man page to no avail.
You don't set those directly in the driver. Whatever app is going to run
> So I picked up a "USBGear" serial adapter for my Handspring cradle.
> <http://www.usbgear.com/USBG-232MINI.html>
>
> I found the driver and installed it, but now what? I see no way to
> set speed, stop bits, etc. I looked for a man page to no avail.
data through it does that. You look in /dev to find out what the
interface is called (it'll have a name probably something like
"tty.usbserial-A6005vpP") and then point the app at it.
Isaac
Message has been deleted
David Lesher
May 30, 2013, 8:15:06 AM5/30/13
to
Nelson <nel...@nowhere.com> writes:
>In case of problems or questions, please remember that we are only an
>email away. We promise to treat You, our customer, with respect. Every
>request will be professionally handled by one of our customer
>representatives. "
>Or:
>"Have Questions? Our Tech Guys Can Help!
>Support Center Hours: 10AM EST - 6 PM EST Monday - Friday Only!
>GET Pre-Sale Help FOR Item USBG-232MINI. Click Here"
>I'd start with them.
I did; but to date I have gotten no reply.
>In case of problems or questions, please remember that we are only an
>email away. We promise to treat You, our customer, with respect. Every
>request will be professionally handled by one of our customer
>representatives. "
>Or:
>"Have Questions? Our Tech Guys Can Help!
>Support Center Hours: 10AM EST - 6 PM EST Monday - Friday Only!
>GET Pre-Sale Help FOR Item USBG-232MINI. Click Here"
>I'd start with them.
I did; but to date I have gotten no reply.
DaveC
May 31, 2013, 12:31:09 AM5/31/13
to
> I found the driver and installed it, but now what? I see no way to
> set speed, stop bits, etc. I looked for a man page to no avail.
>
> Grr....
What Mac application are you connecting to the serial port?
> set speed, stop bits, etc. I looked for a man page to no avail.
>
> Grr....
David Lesher
Jun 13, 2013, 7:39:46 PM6/13/13
to
0 new messages