Twinhead Supernote - Need Information

[Terry]

I bought a used Supernote 386sX. There is a VGA connector on the side which does not work. Was this a hardware option? I opened the case
and could not see any dip switches. The BIOS setup shows VGA/EGA monitor selected. Is it possible that there is a software driver which
enables VGA output to this connector.

The LCD display is a little faint. Are there replacement parts available for the display?

The HD is a Conner CP-4044 IDE drive (40Meg). If I decided to replace this with a larger drive would a Disk Manager like "On-Track" work?

I checked Twinhead's Web site but it appears that they are only supporting their newer units there.

Terry Macham
CTech
ASTT of British Columbia

[David Kraft]

I'll tell you that Twinhead "Does Not sell parts"
I have a Slimnote 7 which had a heat related stress fracture while
sitting on a desk.

They said I was out of luck on a warranty claim on ANY glass cracking,
and that they wouldn't sell me a new one.

Aside from that, it had a complete structrual defect in the main unit.
Where the Harddrive met the keyboard, it was not strong enough to
support it's own weight when picked up!

Don't buy Twinhead. No support! Poor Quality!