Exited by Louis's Quest in the HyperWorld

[Cheers]

I found a Hyperam setup disk for adf @7017

http://members.iinet.net.au/~moussa/HyperRam.zip

I know that I have stacks of them but god knows where.

--
Cheers......

[UZnal]

> I found a Hyperam setup disk for adf @7017

AdapterID 07017h
AdapterName "Hypertec RAM50/60"

Fixed memory region at 7-8M, hence 1-2M memory card, EMS, for Mod. 50/60.
The setup program, HYPERAM5.EXE creates the ADF for the refdisk depending on
memory chip population and possibly user options, see MASTER.ADF. In this
case, @7017.ADF on the disk is rather a placeholder or some default
configuration. So much for the easiness of MCA board configuration. The rest
are some DOS utilities, like com driver, spooler and RAM disk formatter.

Adapter description, incl. ADF, is close to:

MEM ADF 7016 BOCA Research Model 50/60 Memory Expansion Board

[Louis Ohland]

AdapterID 07017h

AdapterName "Hypertec RAM50/60"

NumBytes 4

FixedResources
pos[0]=0100110Xb
pos[1]=00110111b
pos[2]=01001000b
pos[3]=1XXXXXXXb

IO 0258h-025bh

MEM 0700000h-08fffffh

Master.ADF AdapterID 07017h

AdapterName "Hypertec RAM50/60"

NumBytes 4

FixedResources
pos[3]=1xxxxxxxb
pos[0]=xxxxxx0xb

NamedItem
Prompt "EMS I/O addresses"
Choice "EMS disabled"
pos[0]=X10010XXb
Choice "I/O Addresses 258 & 25A"
pos[0]=XX00XXXXb
io 0258h-025Bh
Choice "I/O Addresses 268 & 26A"
pos[0]=XX01XXXXb
io 0268h-026Bh
Choice "I/O Addresses 208 & 20A"
pos[0]=XX10XXXXb
io 0208h-020Bh
Choice "I/O Addresses 218 & 21A"
pos[0]=XX11XXXXb
io 0218h-021Bh
Help
"Expanded Memory Specification (EMS) operation requires that 3
I/O locations are reserved. These locations are 2n8 - 2nA, where n is
5,6,0 or 1. This assignment need not be altered unless in conflict
with another board.

If EMS is not required, it may be disabled."

NamedItem
Prompt "Hyperam50/60 Window status"
Choice "enabled at: C000-DFFF"
pos[0]=X0XX00XXb
mem 0c0000h-0dffffh
Choice "enabled at: C000-CFFF"
pos[0]=X0XX01XXb
mem 0c0000h-0cffffh
Choice "enabled at: C800-D7FF"
pos[0]=X0XX10XXb
mem 0c8000h-0d7fffh
Choice "enabled at: D000-DFFF"
pos[0]=X0XX11XXb
mem 0d0000h-0dffffh
Choice "enabled at: C000-D7FF"
pos[0]=X1XX00XXb
mem 0c0000h-0d7fffh
Choice "enabled at: C400-DBFF"
pos[0]=X1XX01XXb
mem 0c4000h-0dbfffh
Choice "enabled at: C800-DfFF"
pos[0]=X1XX10XXb
mem 0c8000h-0dffffh
Choice "Disabled"
pos[0]=X1XX11XXb

Help
"The window referred to here is the 64k+ of address space used by the
Hyperam50/60 to access the extra ram. This is documented in the
LIM-SPEC 4.0
specification. As several boards compete for the use of a small address
space,
the Hyperam50/60 address space may sometimes conflict with other
peripherals.
In this case, use the function keys to flip through the options until the
conflict is resolved. If this is not possible, you should try moving some
of your other peripherals.
If you do NOT wish to use EMS memory the window should be disabled.
NOTE that if you are installing more than one Hyperam50/60 board, the
status of ALL BUT ONE of the windows must be disabled. Only one window
must be enabled. This is so because all Hyperam50/60 boards share a
single window."