Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
TCP/IP Interface Status RCYPND Problem
744 views
Skip to first unread message
BWG
Mar 3, 2000, 3:00:00 AM3/3/00
to
Hello All,
Currently we are working on AS/400 S-30 V4R1M0 and using TCP/IP interface to
connect to the clients.
Suddenly we found an error on the TCP/IP Interface. The status was RCYPND
(recovery pending). After we varied off and on, the connection was back to
normal.
It happened several times.
I was wondering to know what is the cause that made the connection was
disconnected.
Has anyone ever faced this problem?
Thanks in advanced.
Gege
Kevin
Mar 3, 2000, 3:00:00 AM3/3/00
to
Most likely it is a HW problem with the cable at the top of the list.
"BWG" <b...@thenavy.com> wrote in message
news:89nmkr$35l$1...@swapw4.swa.epson.co.jp...
oco...@my-deja.com
Mar 4, 2000, 3:00:00 AM3/4/00
to
In article <89nmkr$35l$1...@swapw4.swa.epson.co.jp>,
"BWG" <b...@thenavy.com> wrote:
> Hello All,
>
> Currently we are working on AS/400 S-30 V4R1M0 and using TCP/IP
interface to
> connect to the clients.
> Suddenly we found an error on the TCP/IP Interface. The status was
RCYPND
> (recovery pending). After we varied off and on, the connection was
back to
> normal.
> It happened several times.
>
> I was wondering to know what is the cause that made the connection was
> disconnected.
>
> Has anyone ever faced this problem?
>
> Thanks in advanced.
>
> Gege
>
>
I faced this problem too. I use the Personal Communications module of CA
to connect to my PC clients. It mostly occurs when the terminal
emulation loses the connection to the AS/400.
"BWG" <b...@thenavy.com> wrote:
> Hello All,
>
> Currently we are working on AS/400 S-30 V4R1M0 and using TCP/IP
interface to
> connect to the clients.
> Suddenly we found an error on the TCP/IP Interface. The status was
RCYPND
> (recovery pending). After we varied off and on, the connection was
back to
> normal.
> It happened several times.
>
> I was wondering to know what is the cause that made the connection was
> disconnected.
>
> Has anyone ever faced this problem?
>
> Thanks in advanced.
>
> Gege
>
>
to connect to my PC clients. It mostly occurs when the terminal
emulation loses the connection to the AS/400.
--
Olaf Cordes
Sent via Deja.com http://www.deja.com/
Before you buy.
Rajesh Joshi
Mar 4, 2000, 3:00:00 AM3/4/00
to
Your problem is something to do with the communication link failure between the AS/400 and Ethernet HUB or Switch... Once the link fails the Ethernet line on As/400 goes in recovery mode and tries to recover the connection m it tries for the number of times specified in communication recovery count and after specified time interval, thus it will show the message either RCY/Failed or RCYPND ...
Check your Cable (UTP mounting cable from AS/400 to Switch / HUB )
Secondly check for Collision indication on the HUB or Switch.
With Best Regards
Rajesh
0 new messages