Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

SRC 10112240

71 views
Skip to first unread message

Michael Paris

unread,
Apr 4, 2002, 7:23:06 AM4/4/02
to
Hi,

after transport of our AS/400 Modell 620 I get an System reference code
10112240. The system is'nt under service any more.
Any idea what to do?

Kind regards
--
Michael Paris
Pressevertrieb Köln GMBH & CO. KG

René H. Hartman

unread,
Apr 4, 2002, 7:10:40 AM4/4/02
to
Looking up your SRC in the manual (1xxx 2240) indicates an 'Air Moving
Device Panel Fault'.
So it looks like one or more of the fans are stuck. Obvious thing to look
for is tie-wraps protruding into a fan opening, physically blocking the fan.
Otherwise, you may just have a fan that fails to spin up. If it's a fan
inside the power supply, IBM will replace the supply, not the fan, so you
may want to do some investigation yourself (_very_ carefully).

--
Vriendelijke groeten / Kind regards
René H. Hartman
R.H. Hartman Automatiserings Consultancy
www.hac-maarssen.nl

"Michael Paris" <michae...@pv-koeln.de> schreef in bericht
news:3CAC45AA...@pv-koeln.de...

Jack Hefner

unread,
Apr 4, 2002, 10:50:03 AM4/4/02
to
I did a lookup via a search engine and came up with this (by the way I used
"System Reference Codes" for my search and this was the first hit of many)

http://www.as400pro.com/SystemReferenceCodes.htm

"Michael Paris" <michae...@pv-koeln.de> wrote in message
news:3CAC45AA...@pv-koeln.de...

russandsandy

unread,
Apr 5, 2002, 12:09:37 AM4/5/02
to
Most likely the processor fan is not spinning up after being off.

"Michael Paris" <michae...@pv-koeln.de> wrote in message
news:3CAC45AA...@pv-koeln.de...

0 new messages