Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Load Failure occurred on device tap 01 As400
134 views
Skip to first unread message
Ahmed Adel
Jun 9, 2014, 5:55:42 AM6/9/14
to
I have problem with tape of type ultrium 5 this tape I can't take daily backup from system on it message appears to me says that Load Failure occurred on device tap01 and I can't get it out from the IBM Server and the small screen above the tape part in the IBM Server machine shows the number (6 and !) please I need an urgent help
Peter H. Coffin
Jun 9, 2014, 9:24:54 AM6/9/14
to
which is a full height LTO 5 also known as 3580-S53. For that one, "6"
means the tape is unusable. You've probably already figured that out. If
it's not coming out, call IBM Service for advice.
--
68. I will spare someone who saved my life sometime in the past. This is
only reasonable as it encourages others to do so. However, the offer
is good one time only. If they want me to spare them again, they'd
better save my life again. --Peter Anspach's Evil Overlord list
GP
Jun 9, 2014, 9:37:57 AM6/9/14
to
You can try to press and hold the eject button for 30 seconds (or more,
I do not remember).
Regards
GP
I do not remember).
Regards
GP
CRPence
Jun 9, 2014, 9:39:18 AM6/9/14
to
On 09-Jun-2014 04:55 -0500, Ahmed Adel wrote:
> I have problem with tape of type Ultrium 5 this tape I can't take
Any IBM i OS message has a "message identifier" that can be used in a
symptom search; the text of a message is not generally search-capable,
because there are many possible languages, whereas a message identifier
is the same across every language. Also, the pronoun "it" is unclear.
Is there perhaps, a cartridge in the device that does not eject, even
when the eject button is pressed? Or does "get it out" imply a desire
to remove the physical device?
The first two links below, document the source\reference-material as
the third link that is to an IBM InfoCenter:
<http://radek-it.blogspot.com/2012/10/resolving-errors-with-ultrium-tape.html>
_Resolving errors with the Ultrium tape drives_
<http://radek-it.blogspot.com/2012/10/tape-alert-flags-supported-by-ultrium.html>
_Tape Alert flags supported by the Ultrium tape drives_
"This table lists the Tape Alert Flags that are supported by the Ultrium
tape drives.
..."
<http://publib.boulder.ibm.com/infocenter/ts3500tl/v1r0/topic/com.ibm.storage.ts3500.doc/opg_3584_a69m4bfs0.html>
_Resolving errors with the Ultrium tape drives_
"This section lists error codes that can appear on the single-character
display (SCD) of the Ultrium tape drives and describes each error.
..."
--
Regards, Chuck
> I have problem with tape of type Ultrium 5 this tape I can't take
symptom search; the text of a message is not generally search-capable,
because there are many possible languages, whereas a message identifier
is the same across every language. Also, the pronoun "it" is unclear.
Is there perhaps, a cartridge in the device that does not eject, even
when the eject button is pressed? Or does "get it out" imply a desire
to remove the physical device?
The first two links below, document the source\reference-material as
the third link that is to an IBM InfoCenter:
<http://radek-it.blogspot.com/2012/10/resolving-errors-with-ultrium-tape.html>
_Resolving errors with the Ultrium tape drives_
<http://radek-it.blogspot.com/2012/10/tape-alert-flags-supported-by-ultrium.html>
_Tape Alert flags supported by the Ultrium tape drives_
"This table lists the Tape Alert Flags that are supported by the Ultrium
tape drives.
..."
<http://publib.boulder.ibm.com/infocenter/ts3500tl/v1r0/topic/com.ibm.storage.ts3500.doc/opg_3584_a69m4bfs0.html>
_Resolving errors with the Ultrium tape drives_
"This section lists error codes that can appear on the single-character
display (SCD) of the Ultrium tape drives and describes each error.
..."
--
Regards, Chuck
0 new messages