Re: Was reading Eprom Programmers Handbook...

[Dmackey828]

On Wed, 08 Jul 2009 23:58:26 -0400, Dmackey828 <n2...@NOSPAMarrl.net>
wrote:

>Hello All,
>The book said something about a cartridge that has
>HESMON, PROMOS and a Wedge on it.
>
>Anyone have this OR know where I can get an
>IMAGE to burn to an eprom?
>
>Thanks..

Cart image found at :
http://www.commodore64.retrocomp.com/directory/Utility/Firmware/various/promos_11.bin

I burned it to an 27c64 - 8k EPROM using a Promenade C1 burner. The
Eprom works perfect.

[Leif Bloomquist]

"Dmackey828" <n2...@NOSPAMarrl.net> wrote in message
news:3lc7g5h4c9rf0h4hc...@4ax.com...

> Cart image found at :
> http://www.commodore64.retrocomp.com/directory/Utility/Firmware/various/promos_11.bin
>
> I burned it to an 27c64 - 8k EPROM using a Promenade C1 burner. The
> Eprom works perfect.

Thanks for the link!

I've tried it in VICE by removing the extra 00 80 at the front and attaching
it as a Generic 8KB cartridge image.

It comes up in HESMON just fine. But if I try to execute a PROMOS command
(i.e. G), it either dumps me back into HESMON or gives ?SYNTAX ERROR.

I would have expected at least G (Glossary/Command Summary) to work without
a C1 attached.

Any suggestions? Does it work OK on the real hardware?

-Leif

[Dmackey828]

Hey Leif,
It works perfect on actual hardware. I have made carts from it and all
work perfect. I'll have to try under vice sometime.