I recently picked up a 1040ST (No docs.), and am looking for the pinout of
the monitor port. It came with a mono monitor but I would like to have a
shot at installing a colour monitor instead.
Can anyone send me the pinout ? It would be much appreciated .
Anyone keeps a list of the best technical books to get for the ST ?
Dave Internet:d...@dcs.ed.ac.uk Janet:d...@uk.ac.ed.dcs
xxxxxxx
x x
x * * * * x Here is an attempt to
x * * * * x show the Monitor jack.
x * * * * x (Each star is a pin receptacle)
x * x
xxxxxxx
The pins are numbered as follows*:
4 3 2 1
8 7 6 5
12 11 10 9
13
*note: this is the external PORT view!
1--Audio Out 7--Red
2--Composite Sync 8-- +12vdc (10ma)
3--General Purpose Output 9--Horizontal Sync.
4--Monochrome Detect 10--Blue
5--Audio in 11--Monochrome
6--Green 12--Vertical Sync.
13--Ground
(This info. was straight out of my users manual.)
Does Pin #5 have any use? Can audio actually be input to the atari via
this pin? Sampled? Or is it just a loop-back?
OK LOOK AT YOUR ST FROM BEHIND,AT THE MONITOR SOCKS.
IT'S A 13 PINS SOCK : 4 3 2 1
8 7 6 5
12 11 10 9
13
AS FOLLOWS:
1 :AUDIO OUT
2 : COMPOSITE OUT (Eh...NEVER work with my stf...)
3 : POLY OUT (what that mean....????)
4 : MONO detection
5 : Audio In (!)
6 : GREEN out
7 : RED out
8 : + 12 Volts
9 : Horz Sync
10: BLUE out
11: MONO out
12: Vert Sync
13: GND
Hope this helps
cu...
-- Via DLG Pro v0.995
+------------------+--------------------------------------------------+
|Laurent Zimmerli |Temptation BBS +41 38553454 / Voice +41 39267037 |
|Jacob-Brandt 81 |Fidonet : 2:301/331.0 / Fax +41 39280607 |
|CH-2300 Chx-de-Fds|Internet: Laurent_...@temptation.alphanet.ch |
+------------------+--------------------------------------------------+
Early 520 ST units have nothing on pin 2 and Ground on pin 8.
STMs and STFMs have Composite Video on pin 2.
STE assignment differs; no "General purpose output" there.