Cyberstorm PPC Power requirements
Gary Bates
I would be grateful if somebody could tell me what the power
requirements are for the Phase5 Cyberstorm PPC 604e@233Mhz with
060@50Mhz and ultra SCSI is.
On the Phase5 website it indicates that the Cyberstorm PPC is for
A3000(T) and A4000(T). Does this mean it will not work on a standard
Amiga 4000 desktop?
I noticed in an Aminet review of the Blizzard 603e for the 1200 that
this card requires 4.5 Amps for 5 Volts, meaning that a standard 1200
PSU is not powerful enough because it only outputs 3 Amps for 5 Volts.
Is the standard Amiga 4000 (desktop) PSU up to the job of powering a
Cyberstorm PPC?
Thanks in advance for any information provided.
--
Gary Bates
Massimo Mancini
Howdy!
[...]
>On the Phase5 website it indicates that the Cyberstorm PPC is for
>A3000(T) and A4000(T). Does this mean it will not work on a standard
>Amiga 4000 desktop?
Generally Ax000(T) usually stands for both versions, desktop AND tower -
just like one/more cdrom track(s)...
But to be more specific... There`s absolutely no limitation regarding the
A4ooo dektop. Every model has it`s own installation chapter and I recently
installed a CSPPC in a friend`s A4ooo"D" :).
>Thanks in advance for any information provided.
If it`s the PSU you`re thinking about - get your board and don`t mind :)
>Gary Bates
--
_/\_____/\_/\ ____/\ ___
\ \ \ X /\ X / A4oooT/PPC/233MHz
/ //\ \ \ \ \ 13oMB RAM*6+GB UW
/ / / / / X \/ X \ CV64/3D*ISDN*CD-R
/ /_/_/__/\ \_/ \ \_/ \ \A12oo/o3o/5o*16MB
\_/~~~~~~~~~\_/~~~\_/~~~~\_/~~~~~~~~~~~~~~~~~
Greg Tallent
Back on 14-May-98 13:00:24 Michael sho...@best.com Wrote:
>Hi Gary,
>On 14 May 1998, Gary Bates wrote:
>: Thanks in advance for any information provided.
>How long do I get to redeem this? Is this good for this post only, or is it
>good for any future posts you might be doing :) ?
>I always thought this was a silly statement. For example (oh here he goes
>again with one of them) what if my answer was, "Go boil your head"? Would
>you still be thanking me in advance? So I suppose there is some sort of
>implied limit.
Unless you really get off on boiling your head...
>C-ya,
>Michael (sho...@best.com) - Team *AMIGA*
<TSB>
Greg Tallent |Amiga2000 GVP 040/33mhz/3.1 26 megs,2 gig/OpalVision |
gwt @ gte.net |Supra 28.8k, Lightwave 5.0, SCSI-Zip, Picasso II 1Meg|
Anything that kills you makes you... well, dead.
Bert Bosma
> I would be grateful if somebody could tell me what the power
> requirements are for the Phase5 Cyberstorm PPC 604e@233Mhz with
> 060@50Mhz and ultra SCSI is.
I looked through the manual but it doens't say.
However, since I have a 233 and a 060/50 and a A4000 Desktop with a
couple of things in it besides the Cyberstorm, I would say it will run
8-)).
For more detail see below 8-)...
Regards,
Bert Bosma
---------------------------------------------
L.M. Bosma (l...@wxs.nl) or (l...@pi.net)
Amiga 4000/74Mb PPC604e 233Mhz/68060 50Mhz
Picasso IV VLab Motion Toccata Fastlane Z3
Dynalink 28k8 1Gb Quantum 2.1Gb Seagate
Essential: Miami, Voyager, NewIcons, AHI, P96
---------------------------------------------
Johnny C. Kitchens
"Gary Bates" <ga...@batesg.demon.co.uk> writes:
>I would be grateful if somebody could tell me what the power
>requirements are for the Phase5 Cyberstorm PPC 604e@233Mhz with
>060@50Mhz and ultra SCSI is.
>
>A3000(T) and A4000(T). Does this mean it will not work on a standard
>Amiga 4000 desktop?
>
>this card requires 4.5 Amps for 5 Volts, meaning that a standard 1200
>PSU is not powerful enough because it only outputs 3 Amps for 5 Volts.
>
>Is the standard Amiga 4000 (desktop) PSU up to the job of powering a
>Cyberstorm PPC?
>
>
I've got one in a 3000 desktop, running fine so far...
Sinisa Lolic
> On 14-May-98 14:16:13, Gary Bates said: <
GB> Is the standard Amiga 4000 (desktop) PSU up to the job of powering a
GB> Cyberstorm PPC?
Yes, it is.
Vegi XXX