AmiExpress...NEED HELP!!!!

[Scott Yu.]

After I got my Supra 14.4K install on the BBS, I have encounter one problem.
When a user call in, on the user's side, the terminal program it is connected
at 2400, but the BBS said "CONNECTED 9600". It seem that BBS don't fall back
to 2400 or 1200. Therefore, the user have problem donwload but does not have
any problem upload....On download, the speed is only 300 cps, worse than using
a 1200 baud modem. The ROM version is 1.200-C, the latest vesion...
The intial string on my modem is this:

AT &F2 E0 S0=0 \N3 M1 W3 %C1 %E1 ..
i use s0 because the bbs types ATA by itself after 1 ring..

Is it the modem string is not correct or is the BBS setup is not?

If you are a SYSOP using AmiExpress with a Supra 14.4K or have any suggestion
to the solution, please leave me mail or leave me a message here....

Thanx

[Jeffrey Grimmett 9999]

In article <willia...@terapin.com> wil...@terapin.com (Scott Yu.) writes:

>The intial string on my modem is this:
>
>AT &F2 E0 S0=0 \N3 M1 W3 %C1 %E1 ..
>i use s0 because the bbs types ATA by itself after 1 ring..
>
>Is it the modem string is not correct or is the BBS setup is not?

Scott, one thing I've noticed with those things is that sometimes items in the
init string get skipped over. I put them all in NRam and just initialize with
ATZ0 or ATZ1.

I can't provide it here, but I have a file on my BBS that contains info on a
WORKING config for TrapDoor, JRC, NComm, and Term. If you can Freq in Fido,
Freq SUPFXMOD.LHA from 1:202/1401. [I recently saw that file posted in
here verbatim -- you might look back a week if you can].

--

*******************************************************************************
Jeff Grimmett [SuperBitMap BBS] | fido!1:202/1401.0 [619-460-7290]
NCR -- Torrey Pines Development Center | Jeffrey....@TorreyPinesCA.ncr.com
"Pay no attention to the man behind the curtain."
*******************************************************************************