Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

RFD: remove comp.sources.hp48

19 views
Skip to first unread message

Jim Riley

unread,
Jun 19, 2006, 9:39:34 PM6/19/06
to
REQUEST FOR DISCUSSION (RFD)
remove comp.sources.hp48

This is a formal Request For Discussion (RFD) to remove the moderated
newsgroup comp.sources.hp48.


RATIONALE: Remove comp.sources.hp48

The last approved message was in November 1993.

There are other more suitable means of distributing program sources,
so comp.sources.hp48 is not a suitable candidate for conversion to an
unmoderated newsgroup.


HISTORY:

The newsgroup comp.sources.hp48 was created in July 1991, with the first
approved message in July 1991.

CHARTER:

From the CFV:

This moderated newsgroup will contain all program postings and anything
that needs to be archived. All programs can and should be posted here.
It will not matter if they are rpl source, assembly source, uuencoded
binaries, asc encoded binaries, or any other format that might come up
in the foreseeable future. It would be good to post large documents
like the internals list here for archiving and to keep the bytes down
in the discussion group. This is not a requirement, only a suggestion.

Each posting will contain rkive(1) headers so that rkive(1) can be
used to automatically archive each posting. Hopefully the sites that
archive comp.sources.* will also archive the HP48 source. There will
be at least one archive site, seq.uncwil.edu.

Each posting will also contain a version number so that it will be much
easier to keep track of newer versions and to purge old versions.

Since most HP28 programs run on the HP48, they are welcome. The
postings will be identified by HP28 in the subject line of each
message.


PROCEDURE:

The full (draft) group removal procedure is documented here:

http://www.big-8.org/dokuwiki/doku.php?id=policies:rmgroup

Those who wish to comment on this request to remove this newsgroup should
subscribe to news.groups and participate in the relevant threads in that
newsgroup.

To this end, the followup header of this RFD has been set to news.groups.

All discussion of active proposals should be posted to news.groups.

If desired by the readership of closely affected groups, the discussion
may be crossposted to those groups, but care must be taken to ensure that
all discussion appears in news.groups as well.


DISTRIBUTION:

This RFD has been posted to the following newsgroups:

news.announce.newgroups
news.groups
comp.sources.hp48
comp.sys.hp48


PROPONENT:

Jim Riley <jim...@pipeline.com>


CHANGE HISTORY:

2006-06-19 Slightly reformatted and posted to YNAN
2006-06-16 Original RFD.

0 new messages