Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
xPC Target Command Mode
1 view
Skip to first unread message
Matthew
Oct 8, 2009, 12:27:01 PM10/8/09
to
On an earlier post, it was stated that from the target press the 'c' key to get into command mode, then you can scroll up and down with PgUp/PgDn. On my Target (PC) nothing happens when I press the c key, I still can't scroll up to see the debug printf's that are off the screen. This is running 2009b. Any suggestions?
Thomas Marullo
Oct 8, 2009, 3:50:19 PM10/8/09
to
"Matthew " <mjre...@gmail.com> wrote in message <hal3sl$nj7$1...@fred.mathworks.com>...
> On an earlier post, it was stated that from the target press the 'c' key to get into command mode, then you can scroll up and down with PgUp/PgDn. On my Target (PC) nothing happens when I press the c key, I still can't scroll up to see the debug printf's that are off the screen. This is running 2009b. Any suggestions?
> On an earlier post, it was stated that from the target press the 'c' key to get into command mode, then you can scroll up and down with PgUp/PgDn. On my Target (PC) nothing happens when I press the c key, I still can't scroll up to see the debug printf's that are off the screen. This is running 2009b. Any suggestions?
Like I mentioned in that previous post, you need to have a model loaded into the xPC in order for the command line to work.
Matthew
Oct 9, 2009, 8:43:01 AM10/9/09
to
"Thomas Marullo" <tm...@lehigh.edu> wrote in message <halfpr$qrm$1...@fred.mathworks.com>...
> "Matthew " <mjre...@gmail.com> wrote in message <hal3sl$nj7$1...@fred.mathworks.com>...
> > On an earlier post, it was stated that from the target press the 'c' key to get into command mode, then you can scroll up and down with PgUp/PgDn. On my Target (PC) nothing happens when I press the c key, I still can't scroll up to see the debug printf's that are off the screen. This is running 2009b. Any suggestions?
>
> Like I mentioned in that previous post, you need to have a model loaded into the xPC in order for the command line to work.
> "Matthew " <mjre...@gmail.com> wrote in message <hal3sl$nj7$1...@fred.mathworks.com>...
> > On an earlier post, it was stated that from the target press the 'c' key to get into command mode, then you can scroll up and down with PgUp/PgDn. On my Target (PC) nothing happens when I press the c key, I still can't scroll up to see the debug printf's that are off the screen. This is running 2009b. Any suggestions?
>
> Like I mentioned in that previous post, you need to have a model loaded into the xPC in order for the command line to work.
I read your post, and I had a model loaded, but after some testing it appears that command mode only works if I have Target Scope Enabled, which kind of stinks because it leaves you with such a small area to see the command window. When I have the Target Scope option off, the c key does nothing......
0 new messages