I have
Adaptec AHA-2940 AU SCSI BIOS v 1.32 + SCSI-CD-ROM + SCSI CD-Writer +
SCSI HD
HD Fujitsu M1638 TAU on IDE1
HD Conner Peripherals 1275MB/CFS 1275 A and Sony CD-ROM on IDE2
both HDs run in LBA mode
Award Modular Bios v4.50 PG 1.0A
After booting the controller detects the three devices. Still, Windows
95
does not start the driver...the entry in the system panel has the
yellow
exclamation mark.
bye Dirk
Check for an IRQ conflict. If not, is the driver installed?
No IRQ conflicts mand, yes, the driver is installed.
bye Dirk
I have
Adaptec AHA-2940 AU SCSI BIOS v 1.32 + SCSI-CD-ROM + SCSI CD-Writer +
SCSI HD
HD Fujitsu M1638 TAU on IDE1
HD Conner Peripherals 1275MB/CFS 1275 A and Sony CD-ROM on IDE2
both HDs run in LBA mode
Award Modular Bios v4.50 PG 1.0A
After booting the controller detects the three devices. Still, Windows
95 does not start the driver, the error code given in the control
panel is 10. No IRQ conflicts are shown and the driver is installed.
bye Dirk